smokeping 安装流程

sexevil

　　yum -y install httpd-devel libxml2-devel libpng-devel glib pango pango-devel freetype freetype-devel fontconfig cairo cairo-devel libart_lgpl libart_lgpl-devel
　　安装rrdtool 1.4.7
　　wget http://oss.oetiker.ch/rrdtool/pub/rrdtool-1.4.7.tar.gz
　　tar zxvf rrdtool-1.4.7.tar.gz
　　cd rrdtool-1.4.7
　　./configure --prefix=/usr/local/rrdtool
　　make && make install
　　安装cgilib
　　wget http://down1.chinaunix.net/distfiles/cgilib-0.5.tar.gz
　　tar zxvf cgilib-0.5.tar.gz
　　cd cgilib-0.5
　　make
　　cp libcgi.a /usr/local/lib
　　cp cgi.h /usr/include
　　安装fping-2.4b2_to
　　wget http://fping.sourceforge.net/download/fping.tar.gz
　　tar zxvf fping.tar.gz
　　cd fping-2.4b2_to
　　./configure
　　make
　　make check
　　make install
　　安装echoping
　　wget http://jaist.dl.sourceforge.net/project/echoping/echoping/6.0.0/echoping-6.0.0.tar.gz
　　tar zxvf echoping-6.0.0.tar.gz
　　cd echoping-6.0.0
　　./configure --without-libidn
　　make
　　make test  #遇到测试不成功等信息也没关系,直接ctrl+c回到命令行
　　make install
　　安装FCGI
　　wget http://cpan.communilink.net/authors/id/F/FL/FLORA/FCGI-0.74.tar.gz
　　tar zxvf FCGI-0.74.tar.gz
　　cd FCGI-0.74
　　perl Makefile.PL
　　make && make install
　　安装mod_fastcgi,dso方式
　　wget http://www.fastcgi.com/dist/mod_fastcgi-2.4.6.tar.gz
　　tar zxvf mod_fastcgi-2.4.6.tar.gz
　　cd mod_fastcgi-2.4.6
　　apxs -o mod_fastcgi.so -c *.c
　　apxs -i -a -n fastcgi .libs/mod_fastcgi.so
　　修改apache配置文件,确认有如下一行,没有则添加
　　LoadModule fastcgi_module modules/mod_fastcgi.so
　　安装SMokePing
　　wget http://oss.oetiker.ch/smokeping/pub/smokeping-2.6.8.tar.gz
　　tar zxvf smokeping-2.6.8.tar.gz
　　./configure --prefix=/usr/local/smokeping
　　在这里会得到类似如下错误提示,需要安装perl一些依赖包
　　checking checking for perl module 'RRDs'... Failed
　　checking checking for perl module 'FCGI'... Ok
　　checking checking for perl module 'CGI'... Ok
　　checking checking for perl module 'CGI::Fast'... Ok
　　checking checking for perl module 'Config::Grammar'... Failed
　　checking checking for perl module 'Digest::HMAC_MD5'... Failed
　　checking checking for perl module 'LWP'... Ok
　　** Aborting Configure ******************************
　　If you know where perl can find the missing modules, set
　　the PERL5LIB environment variable accordingly.
　　FIRST though, make sure that 'perl' starts the perl
　　binary you want to use for SmokePing.
　　Now you can install local copies of the missing modules
　　by running
　　./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty
　　The RRDs perl module is part of RRDtool. Either use the rrdtool
　　package provided by your OS or install rrdtool from source.
　　If you install from source, the RRDs module is located
　　PREFIX/lib/perl
　　先解决”checking checking for perl module ‘RRDs’… Failed”的问题,由于我们是编译安装的rrdtool,所以perl没找到默认路径下它的模块,需要手工拷贝过去
　　6.0 32位
　　cp /usr/local/rrdtool/lib/perl/5.10.1/i386-linux-thread-multi/RRDs.pm /usr/lib/perl5/
　　cp /usr/local/rrdtool/lib/perl/5.10.1/i386-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib/perl5/
　　6.5 64位
　　cp /usr/local/rrdtool-1.3.6/lib/perl/5.10.1/x86_64-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib64/perl5/
　　cp /usr/local/rrdtool-1.3.6/lib/perl/5.10.1/x86_64-linux-thread-multi/RRDs.pm /usr/lib64/perl5/
　　CentOS5.9
　　cp /usr/local/rrdtool/lib/perl/5.8.8/i386-linux-thread-multi/RRDs.pm /usr/lib/perl5/5.8.8/i386-linux-thread-multi/
　　cp /usr/local/rrdtool/lib/perl/5.8.8/i386-linux-thread-multi/auto/RRDs/RRDs.so /usr/lib/perl5/5.8.8/i386-linux-thread-multi/
　　下面的几个模块在错误提示中已经提到解决办法,运行以下指令就会自动下载安装了
　　./setup/build-perl-modules.sh /usr/local/smokeping/thirdparty
　　装完之后,重新运行下面指令
　　./configure --prefix=/usr/local/smokeping
　　gmake install
　　配置smokeping
　　cd /usr/local/smokeping/
　　mkdir cache data var
　　chown apache.apache cache data var
　　cd /usr/local/smokeping/htdocs/
　　cp smokeping.fcgi.dist smokeping.fcgi
　　cd /usr/local/smokeping/etc/
　　cp config.dist config
　　chmod 400 /usr/local/smokeping/etc/smokeping_secrets.dist
　　ln -s /usr/local/smokeping/cache /usr/local/smokeping/htdocs/cache
　　修改/usr/local/smokeping/etc/config
　　vi /usr/local/smokeping/etc/config
　　找到binary = /usr/sbin/fping
　　修改为binary = /usr/local/sbin/fping
　　/usr/local/sbin/fping
　　修改/usr/local/smokeping/bin/smokeping
　　vi /usr/local/smokeping/bin/smokeping
　　找到：use lib qw(); # PERL5LIB
　　修改为：use lib qw(/usr/local/rrdtool/lib/perl); # PERL5LIB
　　修改主机配置文件，增加自己的主机，如果只想测试就把host改成自己要检测的IP就行了
　　+ Test
　　menu= Targets
　　#parents = owner:/Test/James location:/
　　++ James
　　menu = James
　　title =James
　　alerts = someloss
　　slaves = boomer slave2
　　host = james.address
　　++ MultiHost
　　menu = Multihost
　　title = James and James as seen from Boomer
　　host = /Test/James /Test/James~boomer
　　创建开机自动运行脚本
　　vi /etc/rc.local
　　写入如下内容
　　nohup /usr/local/smokeping/bin/smokeping --logfile=/var/log/smokeping.log 2>&1 &
　　修改apache配置文件
　　Alias /smokeping/ "/usr/local/smokeping/htdocs/"
　　
　　AllowOverride None
　　Options All
　　AddHandler cgi-script .fcgi .cgi
　　Order allow,deny
　　Allow from all
　　DirectoryIndex smokeping.fcgi
　　
　　最后重器apache服务，运行
　　nohup /usr/local/smokeping/bin/smokeping –logfile=/var/log/smokeping.log 2>&1 &
　　打开浏览器输入http://smokeping-ip/smokeping/即可访问