centos6.x svn搭建

4532132

yum install subversion -y [iyunv@centos01 ~]# mkdir -p /application/svndata     #数据存储目录 [iyunv@centos01 ~]# mkdir -p /application/svnpasswd   #用户密码 目录 [iyunv@centos01 ~]# svnserve  -d -r /application/svndata/ [iyunv@centos01 ~]# ps -ef |grep svn root      6041     1  0 08:39 ?        00:00:00 svnserve -d -r /application/svndata/ root      6043  5612  0 08:39 pts/0    00:00:00 grep svn [iyunv@centos01 ~]# netstat -lntup |grep 3690 tcp        0      0 0.0.0.0:3690                0.0.0.0:*                   LISTEN      6041/svnserve       [iyunv@centos01 ~]# ######################################### #创建版本库 [iyunv@centos01 ~]# svnadmin create /application/svndata/daima [iyunv@centos01 ~]# tee /application/svndata/daima/ tee: /application/svndata/daima/: Is a directory ^C [iyunv@centos01 ~]# tree /application/svndata/daima/ /application/svndata/daima/ ├── conf │   ├── authz │   ├── passwd │   └── svnserve.conf ├── db │   ├── current │   ├── format │   ├── fsfs.conf │   ├── fs-type │   ├── min-unpacked-rev │   ├── rep-cache.db │   ├── revprops │   │   └── 0 │   │       └── 0 │   ├── revs │   │   └── 0 │   │       └── 0 │   ├── transactions │   ├── txn-current │   ├── txn-current-lock │   ├── txn-protorevs │   ├── uuid │   └── write-lock ├── format ├── hooks │   ├── post-commit.tmpl │   ├── post-lock.tmpl │   ├── post-revprop-change.tmpl │   ├── post-unlock.tmpl │   ├── pre-commit.tmpl │   ├── pre-lock.tmpl │   ├── pre-revprop-change.tmpl │   ├── pre-unlock.tmpl │   └── start-commit.tmpl ├── locks │   ├── db.lock │   └── db-logs.lock └── README.txt 10 directories, 28 files

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158

#修改配置文件 [iyunv@centos01 ~]# cd /application/svndata/daima/conf/ [iyunv@centos01 conf]# ls authz  passwd  svnserve.conf [iyunv@centos01 conf]# cat svnserve.conf ### This file controls the configuration of the svnserve daemon, if you ### use it to allow access to this repository.  (If you only allow ### access through http: and/or file: URLs, then this file is ### irrelevant.) ### Visit http://subversion.tigris.org/ for more information. [general] ### These options control access to the repository for unauthenticated ### and authenticated users.  Valid values are "write", "read", ### and "none".  The sample settings below are the defaults. anon-access = none auth-access = write ### The password-db option controls the location of the password ### database file.  Unless you specify a path starting with a /, ### the file's location is relative to the directory containing ### this configuration file. ### If SASL is enabled (see below), this file will NOT be used. ### Uncomment the line below to use the default password file. password-db = /application/svnpasswd/passwd ### The authz-db option controls the location of the authorization ### rules for path-based access control.  Unless you specify a path ### starting with a /, the file's location is relative to the the ### directory containing this file.  If you don't specify an ### authz-db, no path-based access control is done. ### Uncomment the line below to use the default authorization file. authz-db = /application/svnpasswd/authz ### This option specifies the authentication realm of the repository. ### If two repositories have the same authentication realm, they should ### have the same password database, and vice versa.  The default realm ### is repository's uuid. # realm = My First Repository [sasl] ### This option specifies whether you want to use the Cyrus SASL ### library for authentication. Default is false. ### This section will be ignored if svnserve is not built with Cyrus ### SASL support; to check, run 'svnserve --version' and look for a line ### reading 'Cyrus SASL authentication is available.' # use-sasl = true ### These options specify the desired strength of the security layer ### that you want SASL to provide. 0 means no encryption, 1 means ### integrity-checking only, values larger than 1 are correlated ### to the effective key length for encryption (e.g. 128 means 128-bit ### encryption). The values below are the defaults. # min-encryption = 0 # max-encryption = 256 [iyunv@centos01 conf]# diff svnserve.conf svnserve.conf.bak 12,13c12,13 < anon-access = none < auth-access = write --- > # anon-access = read > # auth-access = write 20c20 < password-db = /application/svnpasswd/passwd --- > # password-db = passwd 27c27 < authz-db = /application/svnpasswd/authz --- > # authz-db = authz #拷贝认证文件模板 [iyunv@centos01 conf]# pwd /application/svndata/daima/conf [iyunv@centos01 conf]# ls authz  passwd  svnserve.conf  svnserve.conf.bak [iyunv@centos01 conf]# cp passwd authz /application/svnpasswd/ [iyunv@centos01 conf]# [iyunv@centos01 conf]# cd /application/svnpasswd/ [iyunv@centos01 svnpasswd]# ll total 8 -rw-r--r--. 1 root root 1080 Dec 29 09:00 authz -rw-r--r--. 1 root root  309 Dec 29 09:00 passwd [iyunv@centos01 svnpasswd]# chmod 700 * [iyunv@centos01 svnpasswd]# ll total 8 -rwx------. 1 root root 1080 Dec 29 09:00 authz -rwx------. 1 root root  309 Dec 29 09:00 passwd [iyunv@centos01 svnpasswd]# #创建用户并授权访问指定项目版本库 [iyunv@centos01 svnpasswd]# ll total 8 -rwx------. 1 root root 1080 Dec 29 09:00 authz -rwx------. 1 root root  309 Dec 29 09:00 passwd [iyunv@centos01 svnpasswd]# vim passwd [iyunv@centos01 svnpasswd]# cat passwd ### This file is an example password file for svnserve. ### Its format is similar to that of svnserve.conf. As shown in the ### example below it contains one section labelled [users]. ### The name and password for each user follow, one account per line. [users] # harry = harryssecret # sally = sallyssecret admin = admin yancong = yancong [iyunv@centos01 svnpasswd]# cat authz ### This file is an example authorization file for svnserve. ### Its format is identical to that of mod_authz_svn authorization ### files. ### As shown below each section defines authorizations for the path and ### (optional) repository specified by the section name. ### The authorizations follow. An authorization line can refer to: ###  - a single user, ###  - a group of users defined in a special [groups] section, ###  - an alias defined in a special [aliases] section, ###  - all authenticated users, using the '$authenticated' token, ###  - only anonymous users, using the '$anonymous' token, ###  - anyone, using the '*' wildcard. ### ### A match can be inverted by prefixing the rule with '~'. Rules can ### grant read ('r') access, read-write ('rw') access, or no access ### (''). [aliases] # joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average [groups] # harry_and_sally = harry,sally # harry_sally_and_joe = harry,sally,&joe # [/foo/bar] # harry = rw # &joe = r # * = # [repository:/baz/fuz] # @harry_and_sally = rw # * = r [daima:/] admin = rw yancong = r [iyunv@centos01 svnpasswd]# ps -ef|grep svn root      6041     1  0 08:39 ?        00:00:00 svnserve -d -r /application/svndata/ root      6095  5612 10 09:26 pts/0    00:00:00 grep svn [iyunv@centos01 svnpasswd]# kill 6041 [iyunv@centos01 svnpasswd]# ps -ef|grep svn root      6097  5612  0 09:26 pts/0    00:00:00 grep svn [iyunv@centos01 svnpasswd]# ls authz  passwd [iyunv@centos01 svnpasswd]# svnserve  -d -r /application/svndata/ [iyunv@centos01 svnpasswd]# ps -ef|grep svn root      6100     1  0 09:27 ?        00:00:00 svnserve -d -r /application/svndata/ root      6102  5612  0 09:27 pts/0    00:00:00 grep svn [iyunv@centos01 svnpasswd]#