virsh 操作kvm虚拟机

hc6538

　　#查看你的硬件是否支持虚拟化。命令：



[iyunv@VM_166_143 data]#egrep '(vmx|svm)' /proc/cpuinfo

　　#安装基础包



[iyunv@VM_166_143 data]#yum -y install kvm libvirt bridge-utils acpid
　　#启动依赖服务及加载模块



[iyunv@VM_166_143 data]#sed -i '/modprobe kvm/d' /etc/rc.d/rc.local
[iyunv@VM_166_143 data]#echo "modprobe kvm" >>/etc/rc.d/rc.local
[iyunv@VM_166_143 data]#/etc/init.d/libvirtd start
[iyunv@VM_166_143 data]#/etc/init.d/acpid start
#检查是否加载虚拟模块
[iyunv@VM_166_143 data]#lsmod |grep kvm
kvm_intel              55496  0
kvm                   337772  1 kvm_intel

　　#网桥管理命令查看



#配置网桥
[iyunv@VM_166_143 data]# brctl show
bridge namebridge idSTP enabledinterfaces
virbr08000.525400671d5eyesvirbr0-nic
[iyunv@VM_166_143 data]# virsh iface-bridge eth0 br0
Created bridge br0 with attached device eth0
Bridge interface br0 started
[iyunv@VM_166_143 data]# brctl show
bridge namebridge idSTP enabledinterfaces
br08000.000c298a5fb4yeseth0
virbr08000.525400671d5eyesvirbr0-nic
[iyunv@VM_166_143 data]# ifconfig
br0       Link encap:Ethernet  HWaddr 00:0C:29:8A:5F:B4  
inet addr:192.168.166.143  Bcast:192.168.166.255  Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe8a:5fb4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2698 (2.6 KiB)  TX bytes:3518 (3.4 KiB)
eth0      Link encap:Ethernet  HWaddr 00:0C:29:8A:5F:B4  
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:21519 errors:0 dropped:0 overruns:0 frame:0
TX packets:10302 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:29679394 (28.3 MiB)  TX bytes:1309503 (1.2 MiB)
lo        Link encap:Local Loopback  
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:65536  Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:212 (212.0 b)  TX bytes:212 (212.0 b)
virbr0    Link encap:Ethernet  HWaddr 52:54:00:67:1D:5E  
inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

　　#创建软链接，并创建虚拟机存放目录



[iyunv@VM_166_143 data]# ln -sv  /usr/libexec/qemu-kvm  /usr/bin/qemu-kvm
`/usr/bin/qemu-kvm' -> `/usr/libexec/qemu-kvm'
[iyunv@VM_166_143 data]# mkdir -p /data/kvm/
[iyunv@VM_166_143 data]# cd /data/kvm
[iyunv@VM_166_143 data]# mkdir test;cd test

　　#创建虚拟机磁盘文件



[iyunv@VM_166_143 test]# qemu-img create -o preallocation=metadata -f qcow2 linux.qcow2 50G

　　#创建xml模板文件



[iyunv@VM_166_143 data]# cat test.xml
<domain type="kvm">
<name>ebc32bcb-f29a-4450-bb48-b947669a06a8</name>
<uuid>ebc32bcb-f29a-4450-bb48-b947669a06a8</uuid>
<memory>1048576</memory>
<vcpu>1</vcpu>         
<os>
<type arch="x86_64" machine="pc">hvm</type>
<boot dev="hd"></boot>
</os>
<features>
<acpi></acpi>
<apic></apic>
<pae></pae>
</features>
<clock offset="localtime"></clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/libexec/qemu-kvm</emulator>
<disk type="file" device="disk">
<driver name="qemu" type="qcow2"></driver>
<source file="/data/kvm/test/linux.qcow2"></source>
<target dev="hda" bus="ide"></target>
</disk>
<interface type="bridge">
<source bridge="br0"></source>
</interface>
<input type ="tablet" bus="usb"></input>
<input type="mouse" bus="ps2"></input>
<graphics type="vnc" port="-1" listen="0.0.0.0" keymap="en-us"></graphics>
<serial type="pty">
<target port="0"></target>
</serial>
<console type="pty">
<target type="serial" port="0"></target>
</console>
</devices>
</domain>

　　#创建虚拟机,不建议使用virsh create,停机后,virsh list --all查看不到虚拟机信息,推荐使用virsh define+virsh start命令



[iyunv@VM_166_143 data]# virsh create test.xml  
或者
[iyunv@VM_166_143 data]# virsh define test.xml  
[iyunv@VM_166_143 data]# virsh start test.xml

　　#常用命令　　



#关闭虚拟机
virsh shutdown demo
#取消定义虚拟机
virsh undefine demo
#重启虚拟机
virsh reboot demo
#强制关闭虚拟机
virsh destroy demo
#列出所有虚拟机
virsh list --all
#在属主机进入虚拟机console
virsh console demo
退出虚拟机回到HOST按组合键:
Ctrl+]
　　#虚拟机模板必配的设置



#删除模板的网卡信息,使其可以制作模板
sed -i '/HWADDR/d;/UUID/d'  /etc/sysconfig/network-scripts/ifcfg-eth0
rm -f /etc/udev/rules.d/70-persistent-net.rules
#虚拟机修改,解决主机virsh console连接不上问题
echo "ttyS0" >> /etc/securetty
sed -i 's/quiet console=ttyS0/quiet/g;s/quiet/quiet console=ttyS0/g' /etc/grub.conf
sed -i '/respawn/d' /etc/inittab
echo "S0:12345:respawn:/sbin/agetty ttyS0 115200" >>/etc/inittab

　　#常见问题



问题1
#Escape character is ^]
#error: internal error cannot find character device (null)
解决方法:
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Virtualization_Host_Configuration_and_Guest_Installation_Guide/App_Domain_Console.html
问题2　
[iyunv@VM5137 data]# virsh iface-bridge eth0 br0
Created bridge br0 with attached device eth0
error: Failed to start bridge interface br0
error: internal error failed to create (start) interface br0: failed to execute external program - Running 'ifup eth0' failed with exit code 4: Error: Connection activation failed: Master connection not found or invalid
Active connection state: activating
Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1
解决方法:
service NetworkManager stop
ckconfig NetworkManager off