231312 发表于 2015-12-15 09:09:07

IBMx86 x3850 7143机器面板PCI灯亮

13. I ---- 12/9/2015:12:39:18 --N --0x806f00091381ffff --"Host Power" has been turned off
14. I ---- 12/9/2015:12:38:10 --N --0x4000000e00000000 --Remote Login Successful. Login ID: USERID from Web at IP address 192.168.70.100
15. E ---- 12/9/2015:12:30:1 --N --0x806f03131701ffff --A software NMI has occurred on system "SN# 06AP035"
16. I ---- 12/9/2015:12:28:31 --N --0x816f03131701ffff --System "SN# 06AP035" has recovered from an NMI
17. I ---- 12/9/2015:12:27:59 --N --0x806f01091381ffff --"Host Power" has been Power Cycled
18. E ---- 12/9/2015:12:25:31 --N --0x806f03131701ffff --A software NMI has occurred on system "SN# 06AP035"
19. I ---- 12/9/2015:12:24:1 --N --0x816f03131701ffff --System "SN# 06AP035" has recovered from an NMI
20. I ---- 12/9/2015:12:23:32 --N --0x806f01091381ffff --"Host Power" has been Power Cycled
21. E ---- 12/9/2015:12:21:1 --C --0x806f08132582ffff --A Uncorrectable Bus Error has occurred on system "SN# 06AP035"
22. E ---- 12/9/2015:12:21:1 --N --0x806f03131701ffff --A software NMI has occurred on system "SN# 06AP035"
23. E ---- 12/9/2015:12:20:58 --C --0x806f002125820000 -- Fault in slot "All PCI Err" on system "SN# 06AP035"

开始认为是PCI卡或者插槽的问题。后面电话咨询800后,给出的答复是,这是这款产品的不足,说白了就是bug,主板上的rom空间比较小。当默认全部PCI的rom支持空间都开启的时候,可能存在PCI的空间不足。于是乎,就需要手动关闭不用的PCI槽位的rom支持。这个报错并不能通过升级微码解决。
   操作过程如图:






页: [1]
查看完整版本: IBMx86 x3850 7143机器面板PCI灯亮