hugwww-hp sl4540 gen8 硬件监控Nagios
hp服务器硬件监控nagios，通过check_hphp sl4540 gen8硬件监控
1.nagios端配置
http://exchange.nagios.org/directory/Plugins/Hardware/Server-Hardware/HP-%28Compaq%29/check_hp/details
最新版check_hp-2.11.tar.gz
http://www.crowdedplace.com/category/check_hp/
将check_hp解压到
/usr/local/nagios/libexec
./check_hp -H 192.168.50.7 -C public
2.hp服务器配置
ubuntu12.04官方源
echo “deb http://downloads.linux.hp.com/SDR/downloads/MCP/ubuntuprecise current/non-free” >> /etc/apt/sources.list
apt-get update
apt-get install hp-snmp-agents hpsmh hp-smh-templates hpacucli hp-health campinglib32gcc1
/sbin/hpsnmpconfig 可以配置snmp服务 添加HP服务器监控用的MIB信息
或者直接在/etc/snmp/snmpd.conf文件开头加上下面内容即可(等同于使用上面的命令)
# Following entries were added by HP Insight Management Agents at
# Tue May7 16:47:03 CST 2013
dlmod cmaX /usr/lib/libcmaX64.so
rwcommunity hp 127.0.0.1
rocommunity public 0.0.0.0
rwcommunitypublic 127.0.0.1
rocommunity public default -V systemonly
trapcommunity hp
trapsink localhost public
# ———————- END ——————–
把
agentAddressudp:127.0.0.1:161改为
agentAddressudp:0.0.0.0:161
把/etc/default/snmpd 中的
SNMPDOPTS=’-Lsd -Lf /dev/null -u snmp -g snmp -I -smux -p /var/run/snmpd.pid’
修改为:
SNMPDOPTS=’-Lsd -Lf /dev/null -u snmp -g snmp -p /var/run/snmpd.pid’
最后重启服务即可
/etc/init.d/hp-health start
/etc/init.d/hp-snmp-agents start
通过check_hpasm监控
http://labs.consol.de/lang/en/nagios/check_hpasm/
wget http://labs.consol.de/download/shinken-nagios-plugins/check_hpasm-4.6.3.2.tar.gz
tar xvzf check_hpasm-4.6.3.2.tar.gz
cd check_hpasm-4.6.3.2
./configure –enable-perfdata –enable-extendedinfo –enable-hpacucli
make
make install
cd /usr/local/nagios/libexec
./check_hpasm –hostname 192.168.50.7
页:
[1]