Dell交换机恢复密码
恢复密码的过程如下，请接console线到交换机的console口，然后断电重启交换机。进入系统后，重新设置密码，并将AAA认证的相关配置删除。
如果有问题，请将回复邮件给我，谢谢
Boot1Checksum Test...............................PASS
Boot2Checksum Test...............................PASS
FlashImage Validation Test.......................PASS
BOOTSoftware Version 1.0.0.12 Built25-Oct-201011:09:55
## ########### ##### ###### ###### ############## ######### ###### ###### ############### ######### ###### ###### ################ ########## #### ###### ###### ##################################### ###### ######################## ######### ###### ###### ############################ ####### ###### ###### ###################### ######### ###### ###### ############################## ###### ###### ############################## ###### ###### ################## ############# ###### ####################################### ###### ############################################################################# ############################# ########################################## ############# ########################### ########## ############# ########################## ######## ############# ####################### #### ############# ############ ##
PowerConnect5548 device with Marvell ARM CPU core. 256 MByte SDRAM.I-Cache16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.
MACAddress :d0:67:e5:87:a7:e3.
Autobootin 2 seconds - press RETURNor Esc. to abortand enter prom.
Startup Menu
Download Software Erase Flash FilePassword RecoveryProcedure Set Terminal Baud-Rate Stack menu BackEnter your choice or press 'ESC' to exit:3Currentpassword will be ignored!
====Press Enter To Continue ====
Startup Menu
Download Software Erase Flash File Password Recovery Procedure Set Terminal Baud-Rate Stack menuBackEnter your choice or press 'ESC' to exit:6
Exit fromboot menu. Continue with flow.Preparingto decompress... 100%DecompressingSW from image-2100%
OKRunningfrom RAM...
************************************************************************RunningSWVer. 4.1.0.12Date22-Jul-2013 Time16:32:43 ************************************************************************
HWversion is 00.00.02Base Macaddress is: d0:67:e5:87:a7:e3Dram sizeis: 256M bytesDramfirst block size is: 229376K bytesDramfirst PTR is: 0x1C00000Dramsecond block size is: 4096K bytesDramsecond PTR is: 0xFC00000Flashsize is: 16M01-Oct-200616:32:47 %CDB-I-LOADCONFIG: Loading running configuration.01-Oct-200616:32:47 %CDB-I-LOADCONFIG: Loading startup configuration.Deviceconfiguration:Slot 1 -PowerConnect 5548Device 0:GT_98DX4122 (BobCat)Device 1:GT_98DX4123 (BobCat)
-------------------------------------- UnitNumber1 --------------------------------------
BobCat,Revision(A2), Cpu(800)BobCat,Revision(A2), Cpu(800)01-Oct-200616:33:04 %INIT-I-InitCompleted: Initialization task is completed
> ------------------------------------- UnitNumber 1Master Enabled -------------------------------------
01-Oct-200616:33:11 %Environment-I-FAN-STAT-CHNG: FAN# 1 status changed - Fan turned OFF.01-Oct-200616:33:11 %Environment-I-FAN-STAT-CHNG: FAN# 2 status changed - Fan turned OFF.01-Oct-200616:33:11 %Environment-I-PS-STAT-CHNG: PS# 1 status changed - operational.TapiVersion: v1.9.3.201-Oct-200616:33:11 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration change trap.CoreVersion: v1.9.3.201-Oct-200616:33:14 %MLDP-I-MASTER: Switching to the Master Mode.01-Oct-200616:33:14 %Stack-I-STCK-CFG-CHNG: Configuration changed: chain01-Oct-200616:33:15 %SNMP-I-CDBITEMSNUM: Number of running configuration items loaded: 29
01-Oct-200616:33:15 %SNMP-I-CDBITEMSNUM: Number of startup configuration items loaded: 29
>lcli02-Oct-200600:33:16 %LINK-W-Down:gi1/0/102-Oct-200600:33:17 %LINK-W-Down:gi1/0/2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
console>
console>enable
console#
console#configure
console(config)#enablepassword dell1234
console(config)#linetelnet
console(config-telnet)#passworddell1234
console(config-telnet)#exit
console(config)#lineconsole
console(config-line)#passworddell1234
console(config-line)#exit
console(config)#exit
console#copyrunning-config startup-config
Thisoperation may take a few minutes.Managementinterfaces will not be available during this time.
Are yousure you want to save? (y/n) y
ConfigurationSaved!console#
console#reload
Are yousure you want to reload the stack? (y/n) y
页:
[1]