虚拟机硬盘不足
# qemu-img create -f raw 5g.raw 5GFormatting '5g.raw', fmt=raw size=5368709120
# cp 5g.raw
# cp 5g.raw 5g.raw.bak
23lmr为虚机名 注意/home/virhost/5g.raw新增的磁盘必是绝对路径!!!
# virsh attach-disk 23lmr /home/virhost/5g.raw vdb --cache none＃vdb可以是（vdc,vda,vdb,vde等）
Disk attached successfully
# fdisk -l
Disk /dev/vda: 5368 MB, 5368709120 bytes
16 heads, 63 sectors/track, 10402 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a136a
Device Boot Start End Blocks IdSystem
/dev/vda1 * 3 1018 512000 83Linux
Partition 1 does not end on cylinder boundary.
/dev/vda2 1018 10403 4729856 8eLinux LVM
Partition 2 does not end on cylinder boundary.
Disk /dev/mapper/VolGroup-lv_root: 4303 MB, 4303355904 bytes
255 heads, 63 sectors/track, 523 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 536 MB, 536870912 bytes
255 heads, 63 sectors/track, 65 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/vdb: 5368 MB, 5368709120 bytes
16 heads, 63 sectors/track, 10402 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
# fdisk /dev/vdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x30dadc82.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-10402, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-10402, default 10402):
Using default value 10402
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
# mkfs.ext3 /dev/vdb1
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
327680 inodes, 1310720 blocks
65536 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 37 mounts or
180 days, whichever comes first.Use tune2fs -c or -i to override.
# fdisk -l
Disk /dev/vda: 5368 MB, 5368709120 bytes
16 heads, 63 sectors/track, 10402 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a136a
Device Boot Start End Blocks IdSystem
/dev/vda1 * 3 1018 512000 83Linux
Partition 1 does not end on cylinder boundary.
/dev/vda2 1018 10403 4729856 8eLinux LVM
Partition 2 does not end on cylinder boundary.
Disk /dev/mapper/VolGroup-lv_root: 4303 MB, 4303355904 bytes
255 heads, 63 sectors/track, 523 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/VolGroup-lv_swap: 536 MB, 536870912 bytes
255 heads, 63 sectors/track, 65 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/vdb: 5368 MB, 5368709120 bytes
16 heads, 63 sectors/track, 10402 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc1594d7d
Device Boot Start End Blocks IdSystem
/dev/vdb1 1 10402 5242576+83Linux
编辑配置文件：
# virsh edit 23lmr
Domain 23lmr XML configuration not changed.
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source file='/home/virhost/23lnmp_memache_redis.raw'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</disk>
＃在磁盘代码的后面加上下面的代码
<disk tpye='file' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source file='/home/virhost/5g.raw'/>
<target dev='vdb' bus='virtio'/>
</disk>
如果不加入上框内的代码重启后会，无法挂载磁盘，并无法启动成功！！！
创建挂载点：
# mkdir /nd
# mount /dev/vdb1 /nd
# df -h
Filesystem SizeUsed Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root
3.9G3.2G502M87% /
tmpfs 245M 0245M 0% /dev/shm
/dev/vda1 477M 33M419M 8% /boot
/dev/vdb1 5.0G139M4.6G 3% /nd
系统启动，自动挂载数据盘
查看磁盘UUID信息：
# blkid
/dev/vda1: UUID="34e5bf8b-5152-4d91-9ebf-8f98217395d3" TYPE="ext4"
/dev/vda2: UUID="MpbaAJ-JfHb-GXvj-BEEu-wFD2-XSUX-5AbirT" TYPE="LVM2_member"
/dev/mapper/VolGroup-lv_root: UUID="1a94c909-6e3a-4cf8-bd62-e3d5e298aa93" TYPE="ext4"
/dev/mapper/VolGroup-lv_swap: UUID="01c6ea43-dc10-44d9-87df-ba308b94ebac" TYPE="swap"
/dev/vdb1: UUID="06dd7613-4629-4964-a56a-b75f583b6030" TYPE="ext3"
编辑系统分区表
vi /etc/fstab
#
# /etc/fstab
# Created by anaconda on Mon Jul 11 09:48:39 2016
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/VolGroup-lv_root / ext4 defaults 1 1
UUID=34e5bf8b-5152-4d91-9ebf-8f98217395d3 /boot ext4 defaults 1 2
UUID=06dd7613-4629-4964-a56a-b75f583b6030 /nd ext3 defaults 1 2
/dev/mapper/VolGroup-lv_swap swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devptsgid=5,mode=6200 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
重启动 -----》制动挂载成功
# df -h
Filesystem SizeUsed Avail Use% Mounted on
/dev/mapper/VolGroup-lv_root
3.9G3.2G502M87% /
tmpfs 245M 0245M 0% /dev/shm
/dev/vda1 477M 33M419M 8% /boot
/dev/vdb1 5.0G139M4.6G 3% /nd
！！！！！！！！！！！注意重reboot没问题，但关机后（包括正常关机），再开启就会报错（如果不在虚机的配置文件中添加相关代码，的情况下会报错，并无法启动），如下图：
这种情况下输入密码( 是指root的密码)，会进入，但在这种模式下，所有的文件都是只读的（root），解决方法：
mount -o remount,rw /
执行这条命令后，权限恢复正常
注释/etc/fstab 中的挂载项，如下图
在实体机上执行如下命令：
重新去掉/etc/fstab 中注释掉的挂载项前面的＃号
请问怎么扩容原来磁盘容量呢？
页:
[1]