k8s-calico【转载】
环境系统：centos7.3
192.168.40.50 local-master
192.168.40.51 local-node1
192.168.40.52 local-node2
master:
kubernetes-master-1.5.2-0.2.gitc55cf2b.el7.x86_64
kubernetes-client-1.5.2-0.2.gitc55cf2b.el7.x86_64
etcd-3.1.0-2.el7.x86_64
docker-client-1.12.6-11.el7.centos.x86_64
docker-1.12.6-11.el7.centos.x86_64
docker-common-1.12.6-11.el7.centos.x86_64
node:
kubernetes-client-1.5.2-0.2.gitc55cf2b.el7.x86_64
kubernetes-node-1.5.2-0.2.gitc55cf2b.el7.x86_64
docker-client-1.12.6-11.el7.centos.x86_64
docker-1.12.6-11.el7.centos.x86_64
docker-common-1.12.6-11.el7.centos.x86_64
一. 修改各节点docker ip
master:
vi/usr/lib/systemd/system/docker.service
--bip=172.25.0.1/24 \
# systemctldaemon-reload
# systemctlrestart docker
node1：
vi/usr/lib/systemd/system/docker.service
--bip=172.25.1.1/24 \
# systemctldaemon-reload
# systemctlrestart docker
node2：
vi/usr/lib/systemd/system/docker.service
--bip=172.25.2.1/24 \
# systemctldaemon-reload
# systemctlrestart docker
二.下载插件
master：
# wget https://github.com/projectcalico/calicoctl/releases/download/v1.1.0/calicoctl
# chmod +x calicoctl
# mv calicoctl/usr/bin/
# docker pull docker.io/calico/node:v1.1.0
# docker tagdocker.io/calico/node:v1.1.0quay.io/calico/node:v1.1.0
# wget -N -P /opt/cni/bin/ https://github.com/projectcalico/calico-cni/releases/download/v1.6.0/calico
# wget -N -P /opt/cni/bin/ https://github.com/projectcalico/calico-cni/releases/download/v1.6.0/calico-ipam
# chmod +x /opt/cni/bin/calico /opt/cni/bin/calico-ipam
node
# docker pull docker.io/calico/node:v1.1.0
# docker tagdocker.io/calico/node:v1.1.0quay.io/calico/node:v1.1.0
# wget -N -P /opt/cni/bin/ https://github.com/projectcalico/calico-cni/releases/download/v1.6.0/calico
# wget -N -P /opt/cni/bin/ https://github.com/projectcalico/calico-cni/releases/download/v1.6.0/calico-ipam
# chmod +x /opt/cni/bin/calico /opt/cni/bin/calico-ipam
三. 配置文件
参考：http://docs.projectcalico.org/v2.1/usage/configuration/as-service
集群所有主机都需要配置以下三个文件
创建calico-node启动文件
# vi /usr/lib/systemd/system/calico-node.service
Description=calico-node
After=docker.service
Requires=docker.service
EnvironmentFile=/etc/calico/calico.env
ExecStartPre=-/usr/bin/docker rm -f calico-node
ExecStart=/usr/bin/docker run --net=host --privileged \
--name=calico-node \
-e NODENAME=${CALICO_NODENAME} \
-e IP=${CALICO_IP} \
-e IP6=${CALICO_IP6} \
-e CALICO_NETWORKING_BACKEND=${CALICO_NETWORKING_BACKEND} \
-e AS=${CALICO_AS} \
-e NO_DEFAULT_POOLS=${CALICO_NO_DEFAULT_POOLS} \
-e CALICO_LIBNETWORK_ENABLED=${CALICO_LIBNETWORK_ENABLED} \
-e ETCD_ENDPOINTS=${ETCD_ENDPOINTS} \
-e ETCD_CA_CERT_FILE=${ETCD_CA_CERT_FILE} \
-e ETCD_CERT_FILE=${ETCD_CERT_FILE} \
-e ETCD_KEY_FILE=${ETCD_KEY_FILE} \
-v /var/log/calico:/var/log/calico \
-v /run/docker/plugins:/run/docker/plugins \
-v /lib/modules:/lib/modules \
-v /var/run/calico:/var/run/calico \
quay.io/calico/node:v1.1.0
ExecStop=-/usr/bin/docker stop calico-node
WantedBy=multi-user.target
创建calico-node服务的环境文件
# vi /etc/calico/calico.env
ETCD_ENDPOINTS=http://local-master:2379
ETCD_CA_FILE=""
ETCD_CERT_FILE=""
ETCD_KEY_FILE=""
CALICO_NODENAME=""
CALICO_NO_DEFAULT_POOLS=""
#CALICO_IP=""
CALICO_IP=""
CALICO_IP6=""
CALICO_AS=""
CALICO_LIBNETWORK_ENABLED=true
CALICO_NETWORKING_BACKEND=bird
创建CNI网络配置文件，用于通知kubernetes创建一个名为calico-k8s-network的网络，并对此网络使用calico插件
# mkdir /etc/cni/net.d
# vi /etc/cni/net.d/10-calico.conf
{
"name": "calico-k8s-network",
"type": "calico",
"etcd_endpoints": "http://local-master:2379",
"log_level": "info",
"ipam": {
"type": "calico-ipam"
},
"policy": {
"type": "k8s"
}
master主机上修改
# vim /etc/etcd/etcd.conf
#
ETCD_NAME=default
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="http://local-master:2380"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379"
#
ETCD_INITIAL_CLUSTER="default=http://local-master:2380"
ETCD_ADVERTISE_CLIENT_URLS=http://local-master:2379
master 主机上
wget http://docs.projectcalico.org/v1.5/getting-started/kubernetes/installation/policy-controller.yaml
修改 policy-controller.yaml文件里的etcd的地址
在minion主机上面需要修改kubelet的配置文件
vi /usr/lib/systemd/system/kubelet.service
WorkingDirectory=/var/lib/kubelet
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/kubelet
ExecStart=/usr/bin/kubelet \
$KUBE_LOGTOSTDERR \
$KUBE_LOG_LEVEL \
$KUBELET_API_SERVER \
$KUBELET_ADDRESS \
$KUBELET_PORT \
$KUBELET_HOSTNAME \
$KUBE_ALLOW_PRIV \
$KUBELET_POD_INFRA_CONTAINER \
$KUBELET_ARGS
--network-plugin=cni \
--network-plugin-dir=/etc/cni/net.d \
四. 启动
master
# serivce etcd restart
# kubectlcreate -f policy-controller.yaml
每个节点上启动calico-node服务
# systemctl enable calico-node
# systemctl start calico-node
# export ETCD_AUTHORITY=local-master:2379
五.验证calico是否启动正常
calicoctl node status
calicoctl get nodes --out=wide
图片.png
图片.png
六.添加子网
# cat pool.yaml
apiVersion: v1
kind: ipPool
metadata:
cidr: 172.25.0.0/16
spec:
ipip:
enabled: true
mode: always
nat-outgoing: true
# calicoctlapply -f pool.yaml
查看子网
图片.png
七.修改node上的配置
设置kube-proxy服务的proxy-mode配置为iptables，修改配置文件/etc/kubernetes/proxy：
KUBE_PROXY_ARGS=" --proxy-mode=iptables"
service kube-proxy restart
页:
[1]