janneyabc 发表于 2017-12-22 18:43:09

Nginx+keepalived双机热备(主主模式)

  之前已经介绍了Nginx+Keepalived双机热备的主从模式,今天在此基础上说下主主模式的配置。
  由之前的配置信息可知:
  master机器(master-node):103.110.98.14/192.168.1.14      VIP1:103.110.98.20
  slave机器(slave-node):103.110.98.24/192.168.1.24       VIP2:103.110.98.21
  主主模式需要两个负载均衡的VIP,
  之前设置了VIP(103.110.98.20)
  所以还需要设置另一个VIP(103.110.98.21)
  修改keepalived的配置
  1)master负载机上的keepalived配置:(注意,这里是双主配置,MASTER-BACKUP和BACKUP-MASTER;如果是多主,比如三主,就是MATER-BACKUP-BACKUP、BACKUP-MASTER-BACKUP和BACKUP-BACKUP-MASTER)
  注意:
  配置中的虚拟路由标识virtual_router_id在MASTER和BACKUP处配置不能一样(但在主从模式下配置是一样的)
  

# vim /etc/keepalived/keepalived.conf  
! Configuration File for keepalived   
  
global_defs {
  
notification_email {   
  
ops@wangshibo.cn   
  
tech@wangshibo.cn
  
}
  
notification_email_from ops@wangshibo.cn
  
smtp_server 127.0.0.1      
  
smtp_connect_timeout 30   
  
router_id master-node   
  
}
  
vrrp_script chk_http_port {      
  script "/opt/chk_nginx.sh"   
  interval 2                  
  weight -5                  
  fall 2                  
  rise 1                  
  
}
  
vrrp_instance VI_1 {
  state MASTER   
  interface em1         
  mcast_src_ip 103.110.98.14
  virtual_router_id 51      
  priority 101               
  advert_int 1               
  authentication {            
  auth_type PASS         
  auth_pass 1111         
  }
  

  
track_script {                     
  chk_http_port                  
  
}
  

  
virtual_ipaddress {         
  103.110.98.20
  
}
  

  
notify_master "/etc/keepalived/clean_arp.sh 103.110.98.20"
  
}
  

  
vrrp_instance VI_2 {            
  state BACKUP         
  interface em1            
  mcast_src_ip 103.110.98.24
  virtual_router_id 52      
  priority 99               
  advert_int 1               
  authentication {            
  auth_type PASS         
  auth_pass 1111         
  }
  
track_script {                     
  chk_http_port               
  
}
  
virtual_ipaddress {      
  103.110.98.21
  }
  
notify_master "/etc/keepalived/clean_arp.sh 103.10.86.21"
  
}
  

# vim /etc/keepalived/clean_arp.sh         //更新vip的arp记录到网关(注意脚本中的网卡别填错了,要跟vip所在网卡一致)
  #!/bin/sh
  VIP=$1
  GATEWAY=103.110.98.1                                                         //负载均衡器的公网网关地址
  /sbin/arping -I em1 -c 5 -s $VIP $GATEWAY &>/dev/null
# chmod 755 /etc/keepalived/clean_arp.sh
  2)slave负载机上的keepalived配置:
  

# vim /etc/keepalived/keepalived.conf  
! Configuration File for keepalived   
  
global_defs {
  
notification_email {   
  
ops@wangshibo.cn   
  
tech@wangshibo.cn
  
}
  
notification_email_from ops@wangshibo.cn
  
smtp_server 127.0.0.1      
  
smtp_connect_timeout 30   
  
router_id slave-node   
  
}
  
vrrp_script chk_http_port {      
  script "/opt/chk_nginx.sh"   
  interval 2                  
  weight -5                  
  fall 2                  
  rise 1                  
  
}
  
vrrp_instance VI_1 {
  state BACKUP   
  interface em1         
  mcast_src_ip 103.110.98.14
  virtual_router_id 51      
  priority 99               
  advert_int 1               
  authentication {            
  auth_type PASS         
  auth_pass 1111         
  }
  

  
track_script {                     
  chk_http_port                  
  
}
  

  
virtual_ipaddress {         
  103.110.98.20
  
}
  

  
notify_master "/etc/keepalived/clean_arp.sh 103.110.98.20"
  
}
  

  
vrrp_instance VI_2 {            
  state MASTER         
  interface em1            
  mcast_src_ip 103.110.98.24
  virtual_router_id 52      
  priority 101               
  advert_int 1               
  authentication {            
  auth_type PASS         
  auth_pass 1111         
  }
  
track_script {                     
  chk_http_port               
  
}
  
virtual_ipaddress {      
  103.110.98.21
  }
  
notify_master "/etc/keepalived/clean_arp.sh 21"
  
}
  

  

# vim /etc/keepalived/clean_arp.sh
  #!/bin/sh
  VIP=$1
  GATEWAY=103.110.98.1                                                
  /sbin/arping -I em1 -c 5 -s $VIP $GATEWAY &>/dev/null
# chmod 755 /etc/keepalived/clean_arp.sh
  重启master和slave负载机的keepalive(保证两台机器的ngixn和keepalived服务都启动)
# /etc/init.d/keepalived restart
# /etc/init.d/keepalived restart
  将nginx中配置的域名解析到这两个VIP地址上:
  103.110.98.20 dev.wangshibo.com
  103.110.98.21 dev.wangshibo.com
  浏览器访问是正常的(如果master或slave有一台宕机,或其中一个VIP故障,只要另一台是正常的就行)


  关闭两台负载机其中一台的keepalived服务,那么它的VIP就会自动漂移到另一台机器上。
  关闭两台机器的nginx,会自动重启(前提是keepalived服务要启动)!对网站域名的访问丝毫不受影响。
# pkill -9 nginx
  root 32365 9775 0 19:04 pts/0 00:00:00 grep --color=auto nginx
# ps -ef|grep nginx
  root 32367 9775 0 19:04 pts/0 00:00:00 grep --color=auto nginx
# ps -ef|grep nginx
  root 32369 32368 0 19:04 ? 00:00:00 /bin/bash /opt/chk_nginx.sh
  root 32374 1 0 19:04 ? 00:00:00 nginx: master process /usr/local/nginx/sbin/nginx
  www 32376 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32377 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32378 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32379 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32380 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32381 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32382 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32383 32374 1 19:04 ? 00:00:00 nginx: worker process
  www 32384 32374 0 19:04 ? 00:00:00 nginx: cache manager process
  www 32385 32374 0 19:04 ? 00:00:00 nginx: cache loader process
  root 32387 9775 0 19:04 pts/0 00:00:00 grep --color=auto nginx
页: [1]
查看完整版本: Nginx+keepalived双机热备(主主模式)