kubernetes学习与实践篇（二） kubernetes1.5 的安装和集群环境部署
# ifconfig docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>mtu 1472inet 172.100.28.1netmask 255.255.255.0broadcast 0.0.0.0
inet6 fe80::42:86ff:fe81:6892prefixlen 64scopeid 0x20<link>
ether 02:42:86:81:68:92txqueuelen 0(Ethernet)
RX packets 29bytes 2013 (1.9 KiB)
RX errors 0dropped 0overruns 0frame 0
TX packets 25bytes 1994 (1.9 KiB)
TX errors 0dropped 0 overruns 0carrier 0collisions 0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>mtu 1500
inet 192.168.39.40netmask 255.255.255.0broadcast 172.20.30.255
inet6 fe80::f816:3eff:fe43:21acprefixlen 64scopeid 0x20<link>
ether fa:16:3e:43:21:actxqueuelen 1000(Ethernet)
RX packets 13790001bytes 3573763877 (3.3 GiB)
RX errors 0dropped 0overruns 0frame 0
TX packets 13919888bytes 1320674626 (1.2 GiB)
TX errors 0dropped 0 overruns 0carrier 0collisions 0
flannel0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>mtu 1472
inet 172.100.28.0netmask 255.255.0.0destination 172.100.28.0
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00txqueuelen 500(UNSPEC)
RX packets 0bytes 0 (0.0 B)
RX errors 0dropped 0overruns 0frame 0
TX packets 2bytes 120 (120.0 B)
TX errors 0dropped 0 overruns 0carrier 0collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING>mtu 65536
inet 127.0.0.1netmask 255.0.0.0
inet6 ::1prefixlen 128scopeid 0x10<host>
looptxqueuelen 0(Local Loopback)
RX packets 65311bytes 5768287 (5.5 MiB)
RX errors 0dropped 0overruns 0frame 0
TX packets 65311bytes 5768287 (5.5 MiB)
TX errors 0dropped 0 overruns 0carrier 0collisions 0
页:
[1]