搜ijsio 发表于 2018-5-9 07:52:15

ubuntu11.04配置postfix

  说明:这里的postfix将安装在独立的目录/usr/local/postfix中,目的是为了方便管理;您亦可以采用默认安装的方式,可能这样使用起来会更为方便些;
  生成别名二进制文件,这个步骤如果忽略,会造成postfix效率极低:
  #
  mv /etc/aliases /etc/aliases.OFF
  #
  ln -sv /etc/postfix/aliases /etc/aliases
  #
  newaliases
  2.进行一些基本配置,测试启动postfix并进行发信
  # /usr/local/postfix/sbin/postconf -n > /etc/postfix/main.cf2
  # mv /etc/postfix/main.cf /etc/postfix/main.cf.old
  # mv /etc/postfix/main.cf2 /etc/postfix/main.cf
  #vim /etc/postfix/main.cf
  修改以下几项为您需要的配置
  myhostname = mail.benet.org
  myorigin = benet.org
  mydomain = benet.org
  mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain #(在最后的时候我将此值设置为空,我也不知道为什么,设置为空就能收信)
  mynetworks = 192.168.1.0/24, 127.0.0.0/8
  说明:
  myorigin参数用来指明发件人所在的域名;
  mydestination参数指定postfix接收邮件时收件人的域名,即您的postfix系统要接收到哪个域名的邮件;
  myhostname 参数指定运行postfix邮件系统的主机的主机名,默认情况下,其值被设定为本地机器名;
  mydomain参数指定您的域名,默认情况下,postfix将myhostname的第一部分删除而作为mydomain的值;
  mynetworks 参数指定你所在的网络的网络地址,postfix系统根据其值来区别用户是远程的还是本地的,如果是本地网络用户则允许其访问;
  inet_interfaces 参数指定postfix系统监听的网络接口;
  注意:
  1、在postfix的配置文件中,参数行和注释行是不能处在同一行中的;
  2、任何一个参数的值都不需要加引号,否则,引号将会被当作参数值的一部分来使用;
  3、每修改参数及其值后执行 postfix>即可令其生效;但若修改了inet_interfaces,则需重新启动postfix;
  4、如果一个参数的值有多个,可以将它们放在不同的行中,只需要在其后的每个行前多置一个空格即可;postfix会把第一个字符为空格或tab的文本行视为上一行的延续;
  启动postfix
  /usr/local/postfix/sbin/postfix
  start
  echo "/usr/local/postfix/sbin/postfix
  start" >> /etc/rc.local
  连接postfix,验正服务启动状况:
  # telnet localhost 25
  Trying 127.0.0.1...
  Connected to localhost.localdomain (127.0.0.1).
  Escape character is '^]'.
  220 mail.benet.org ESMTP Postfix
  ehlo mail.benet.org
  250-mail.benet.org
  250-PIPELINING
  250-SIZE 10240000
  250-VRFY
  250-ETRN
  250-ENHANCEDSTATUSCODES
  250-8BITMIME
  250 DSN
  mail from:root@extmail.org
  250 2.1.0 Ok
  rcpt to:test@extmail.org
  250 2.1.5 Ok
  data
  354 End data with <CR><LF>.<CR><LF>
  subject:Mail test!
  Mail test!!!
  .
  250 2.0.0 Ok: queued as AB94A1A561
  quit
  221 2.0.0 Bye
  Connection closed by foreign host.
  切换到redhat用户进行收信:
  # su – test
  $ mail
  Mail version 8.1 6/6/93.
  Type ? for help.
  &quot;/var/spool/mail/redhat&quot;: 1 message 1 new
  >N
  1 root@extmail.org
  Wed Sep
  5 10:59
  15/488
  &quot;Mail test!&quot;
  &
页: [1]
查看完整版本: ubuntu11.04配置postfix