RedHat AS4.7 连接EQL LOGIC PS6000存储
硬件环境: DELL 6850 ,DELL EQL PS6000存储.软件环境:
REDHAT AS4.7 64bit .
安装步骤:
1.安装iscsi 包.
# rpm -qa|grep iscsi
iscsi-initiator-utils-4.0.3.0-7
如果没有mount 上as4.7 iso 文件执行:
rpm -ivh /media/cdrom/RedHat/RPMS/iscsi-initiator-utils-4.0.3.0-7.x86_64.rpm
2.配置/etc/iscsi.conf
Enabled=yes
Continuous=yes
TargetName=iqn.2001-05.com.equallogic:0-8a0906-aba7e0504-17b0000000e4b305-oracle
Subnet=192.168.2.0/24
DiscoveryAddress=192.168.2.200:3260
配置/etc/initiatorname.iscsi
# cat /etc/initiatorname.iscsi.rpmsave
## DO NOT EDIT OR REMOVE THIS FILE!
## If you remove this file, the iSCSI daemon will not start.
## If you change the InitiatorName, existing access control lists
## may reject this initiator. The InitiatorName must be unique
## for each iSCSI initiator. Do NOT duplicate iSCSI InitiatorNames.
InitiatorName=iqn.2001-05.com.equallogic:0-8a0906-aba7e0504-17b0000000e4b305-oracle
（保持iscsi 号与PS6000中分配的一致，IP地址也与ps6000一致）
3.启动iscsi服务并加入启动项
service iscis start
chkconfig --level 35 iscsi on
4. 检查
# iscsi-ls
*******************************************************************************
SFNet iSCSI Driver Version ...4:0.1.11-7(14-Apr-2008)
*******************************************************************************
TARGET NAME : iqn.2001-05.com.equallogic:0-8a0906-aba7e0504-17b0000000e4b305-oracle
TARGET ALIAS : oracle
HOST>
BUS>
TARGET> TARGET ADDRESS : 192.168.2.3:3260,1
SESSION STATUS : ESTABLISHED AT 一 4月 26 16:06:55 CST 2010
SESSION> *******************************************************************************
5. fdisk 分区格式化
6. mount 至文件系统并加入fstab
7.重新启动并检查。
页:
[1]