在hyper安装openwrt
本帖最后由 wuyvzhang 于 2016-8-2 17:26 编辑 <br /><br /> 写了长长长一篇文章，结果把标签关了，这篇文章就不见了，草稿箱也没有！！！只好直接copy原来作者的文章了
下载地址
openwrt image
tulip driver
引用
Want to add a openwrt machine in hyper-v for testing?Sadly, the openwrt did not include the hyper-v device driver for the network device.
(Un)luckily there is a legacy network driver in hyper-v that can be used in openwrt.
Steps to add openwrt machine inside hyper-v:
[*]In hyper-v, add a machine with 64-128MB ram, legacy network device.
[*]Copy the openwrt image to the virtual hard disk.
[*]Mount the virtual hard disk (mount /dev/sda2 /mnt) and copy the tulip driver to the hard disk.
[*]Boot the openwrt machine.
[*]Inside the openwrt machine, add the tulip driver (cd /; opkg install kmod-tulip_3.3.8-1_x86.ipk)
[*]ifconfig -a to check the name of the network device.
[*]Modify /etc/config/network as usual and restart the network (or reboot).
from：via
www.138253.com SO娱乐城：真_人.足球.彩票齐全| 开户送10元.首存送58元.手机可投Ю注任何游戏顶级信用Ю提现即时到账SO.CC
页:
[1]