cisco 6500 业务版重启
Jun 24 18:56:09.269: %PM_SCP-1-LCP_FW_ERR: System resetting module 3 to recover from error: Linecard received system exception. Errcode =2709000001
Jun 24 18:56:09.269: %OIR-3-PWRCYCLE: Card in module 3, is being power-cycled 'Off (Module Reset due to exception or user request)'
Jun 24 18:56:09.285: %OSPF-5-ADJCHG: Process 10, Nbr 10.16.2.241 on TenGigabitEthernet3/5 from FULL to DOWN, Neighbor Down: Interface down or detached
Jun 24 18:56:09.285: %OSPF-5-ADJCHG: Process 10, Nbr 10.9.15.94 on TenGigabitEthernet3/7 from FULL to DOWN, Neighbor Down: Interface down or detached
Jun 24 18:56:09.321: %OSPF-5-ADJCHG: Process 10, Nbr 11.7.34.21 on Vlan15 from FULL to DOWN, Neighbor Down: Interface down or detached
Jun 24 18:56:09.501: %C6KPWR-4-DISABLED: power to module in slot 3 set Off (Module Reset due to exception or user request)
*Mar1 00:00:12.315: ppc_lc_ibc_subsys_init: ETSEC IBC INIT DONE
Firmware compiled 24-May-12 21:43 by integ Build
Jun 24 18:57:28.937: %SYS-DFC3-5-RESTART: System restarted --
Cisco IOS Software, c4lc Software (c4lc-SP-M), Version 15.0(1)SY2,> Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 10-Jul-12 13:04 by prod_rel_team
Jun 24 18:57:28.953: DFC3: Currently running ROMMON from S (Gold) region
Jun 24 18:57:44.573: %DIAG-6-RUN_MINIMUM: Module 3: Running Minimal Diagnostics...
Jun 24 18:58:16.229: %DIAG-6-DIAG_OK: Module 3: Passed Online Diagnostics
Jun 24 18:58:17.453: %OIR-6-SP_INSCARD: Card inserted in slot 3, interfaces are now online
Jun 24 18:59:08.369: %OSPF-5-ADJCHG: Process 10, Nbr 10.9.15.94 on TenGigabitEthernet3/7 from LOADING to FULL, Loading Done
Jun 24 18:59:13.225: %OSPF-5-ADJCHG: Process 10, Nbr 10.16.2.241 on TenGigabitEthernet3/5 from LOADING to FULL, Loading Done
Jun 24 18:59:16.077: %OSPF-5-ADJCHG: Process 10, Nbr 11.7.34.21 on Vlan15 from LOADING to FULL, Loading Done
C6509-A#show power
system power redundancy mode = redundant
system power total = 5771.64 Watts (137.42 Amps @ 42V)
system power used = 3433.08 Watts (81.74 Amps @ 42V)
system power available = 2338.56 Watts (55.68 Amps @ 42V)
Power-Capacity PS-Fan Output Oper
PS Type Watts A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1 WS-CAC-6000W 5771.64 137.42 OK OK on
2 WS-CAC-6000W 5771.64 137.42 OK OK on
Pwr-AllocatedOper
FanType Watts A @42V State
---- ------------------ ------- ------ -----
1 WS-C6509-E-FAN 210.005.00OK
Pwr-RequestedPwr-AllocatedAdmin Oper
Slot Card-Type Watts A @42V Watts A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
1 WS-X6908-10G 588.00 14.00 588.00 14.00on on
2 WS-X6908-10G 588.00 14.00 588.00 14.00on on
3 WS-X6908-10G 588.00 14.00 588.00 14.00on on
4 WS-X6908-10G 588.00 14.00 588.00 14.00on on
5 VS-SUP2T-10G 435.54 10.37 435.54 10.37on on
6 (Redundant Sup) - - 435.54 10.37- -
system auxiliary power mode = off
system auxiliary power redundancy operationally = non-redundant
system primary connector power limit = 10920.00 Watts (260.00 Amps @ 42V)
system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
system primary power used = 3433.08 Watts (81.74 Amps @ 42V)
system auxiliary power used = 0 Watt
页:
[1]