banbanbai 发表于 2018-7-17 06:22:17

cisco交换机开启dhcp服务

R1#disable  
#############使用 disable 命令退出特权模式
  

  
R1>
  
R1>enable
  
#############使用 enable 命令进入特权模式
  

  
R1#show privilege
  
Current privilege level is 15
  
#############查看特权模式的级别
  

  
############# 进入配置模式
  
R1#configure terminal
  
Enter configuration commands, one per line.End with CNTL/Z.
  
R1(config)#exit
  

  
#############查看接口状态
  
R1#show ip interface brief
  
Interface                  IP-Address      OK? Method Status                Protocol
  
FastEthernet0/0            unassigned      YES unsetadministratively down down
  
FastEthernet0/1            unassigned      YES unsetadministratively down down
  
Serial1/0                  unassigned      YES unsetadministratively down down
  
Serial1/1                  unassigned      YES unsetadministratively down down
  
Serial1/2                  unassigned      YES unsetadministratively down down
  
Serial1/3                  unassigned      YES unsetadministratively down down
  

  
R1#configure terminal
  
Enter configuration commands, one per line.End with CNTL/Z.
  

  
#############进入接口进行配置
  
R1(config)#int fastEthernet 0/0
  

  
R1(config-if)#no shutdown
  
R1(config-if)#
  
*Aug1 19:39:28.523: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
  
*Aug1 19:39:29.523: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
  

  
R1(config-if)#ip address 123.1.1.1 255.255.255.0
  
R1(config-if)#
  
R1(config-if)#
  

  
#############在配置模式中查看接口状态需要加 do 前缀
  
R1(config-if)#do show ip interface brief
  
Interface                  IP-Address      OK? Method Status                Protocol
  
FastEthernet0/0            123.1.1.1       YES manual up                  up
  
FastEthernet0/1            unassigned      YES unsetadministratively down down
  
Serial1/0                  unassigned      YES unsetadministratively down down
  
Serial1/1                  unassigned      YES unsetadministratively down down
  
Serial1/2                  unassigned      YES unsetadministratively down down
  
Serial1/3                  unassigned      YES unsetadministratively down down
  
R1(config-if)#
  

  
#############也可使用 end 命令退出配置模式
  
R1(config-if)#end
  
R1#
  
R1#
  
*Aug1 19:43:17.991: %SYS-5-CONFIG_I: Configured from console by console
  
R1#
  

  
R1#configure terminal
  
Enter configuration commands, one per line.End with CNTL/Z.
  

  
#############开启dhcp server 功能
  
R1(config)#service dhcp
  
R1(config)#ip dhcp pool R123
  

  
R1(dhcp-config)#network 123.1.1.0 255.255.255.0
  

  
#############将客户端的网关指向 dhcp server 接口的IP
  
R1(dhcp-config)#default-router 123.1.1.1
  

  
#############将客户端的DNS指向 dhcp server 接口的IP
  
R1(dhcp-config)#dns-server 123.1.1.1
  

  
#############设置租期为1天0时1分
  
R1(dhcp-config)#lease 1 0 1
  

  
#############配置域名为cisco.com
  
R1(dhcp-config)#domain-name cisco.com
  
R1(dhcp-config)#
页: [1]
查看完整版本: cisco交换机开启dhcp服务