robin 发表于 2018-7-21 12:01:38

网络管理员必备:cisco设备配置

  cisco设备配置—前提配置:
en   conf t   no ip domain-lookup   line con 0   logg syn   exec-time 0 0   exit   host r1 cisco设备配置—VTP配置: vtp domain domain_name   vtp mode server/client/transparent   vtp password password   vtp pruning   vtp version 2 查看VTP配置:show vtp status cisco设备配置—VLAN配置: vlan database (特权模式)   vlan 2 name caiwubu   exit   vlan 2 (全局模式) 查看VLAN配置:show vlan brief cisco设备配置—VLAN Trunk配置: swit trunk encapsulation isl/dot1q/negotiate (接口里面,封装类型)   swit mode trunk 查看配置:show int f0/1 swit 以太网通道: int rang f0/1 -f0/10   swit mode trunk   chan lacp;pagp   channel-group 1 mode on   exit cisco设备配置—三层交换配置: ip routing   no swt (改为路由接口)   ip helper-add 192.168.1.1 (DHCP服务器地址) cisco设备配置—PVST+配置: 1.span vlan 2,4-6 pri 4096(倍数0-32768)   2. root pri/sec   span vlan 2 cost 150 (0-255)   span vlan 2 por * 查看配置:show span show span vlan * d cisco设备配置—HSRP配置: int vlan 2   ip add 192.168.1.1 255.255.255.0   stan 2 ip 192.168.1.254 (虚拟的IP地址)   stan 2 pri 150 (0-255)   stan 2 pree   stan 2 track int f1/0 100 查看HSRP:show stan b cisco设备配置—ACL配置: 标准:acc 1(1-99) per(pre den) source(数据源地址) int f0/0   ip nat inside   int f1/0   ip nat outside   int f0/0   ip acc 1 in 扩展:acc 101(100-199) per(pre/den) protocol(协议) 源地址 目标地址 -- 命名:ip acc stan/ext test per/den host 192.168.1.1 定时:time-range mytie per wee 8:30 to 17:30 acc ....... time-range mytie 查看:show acc cisco设备配置—NAT配置: 静态:ip nat ins sou sta 192.168.100.2 61.159.62.136 端口映射:ip nat ins sou sta tcp 192.168.100.2 80 61.159.62.131 8080 extendable 动态:acc 1 per 192.168.1.0 0.0.0.255 ip nat pool test0 61.159.62.131 62.159.62.190 netmask 255.255.255.192   ip nat ins sou list 1 pool test0 overload   PAT: acc 1 per 10.1.1.0 0.0.0.255   1.ip nat pool test1 61.159.62.131 61.159.62.131 netmask 255.255.255.148   ip nat ins sou list 1 pool test1 overload   2.ip nat ins sou list 1 int f0/0 overload cisco设备配置—RIP配置: router rip   ver 2   no au-   network 192.168.1.0   ----- cisco设备配置—OSPF配置: router ospf 1   router-id 1.1.1.1   network 10.0.0.0 0.0.0.3 area 0 末梢区域:area 1 stub 完全末梢区域:area 1 stub no-su ness:area 1 nssa 完全ness:area 1 nssa no-su 路由重分发: router rip   red ospf 1 metric 10   router ospf 1   red rip subnets   def-in orig (默认)   red sta subnets (静态)   red conn subnets (直连)
页: [1]
查看完整版本: 网络管理员必备:cisco设备配置