【linux】——安装vmware-tools
一：点击安装VMware Tools；二：此时系统桌面上会出现图标VMware Tools；这里面文件位于/media 文件夹下；里面有两个文件我们用第二个；
三：把第二个文件用命令：tar xvfz /media/VMware\ Tools/VMwareTools-6.0.2-59824.tar.gz -C /opt 把文件加压到/opt文件夹中；
四：用命令：cd /opt/vmware-tools-distrib/ 转到此目录下；
五：执行命令： ./vmware-install.p1 安装工具；然后就是一路enter键，需要yes的输入yes ，需要no的输入no；即可；
如果比较幸运，那就安装成功了，不过在安装的过程中会碰到一下现象：
一、 配置vmware-config-tool会有以下报错：
Unable to create the directory /mnt/hgfs.
Execution aborted.
原因：在/mnt下已经mount了光盘。
解决方法：将其umount，再重新配置vmware-config-tool。
二、配置vmware-config-tool还会有以下报错：
CentOS5 kernet: unregister_netdevice: waiting for eth0 to become free.
主要原因：配置vmware-config-tool与网卡的IPv6地址有冲突。
解决方法：将该网卡的IPv6禁用。
1. Add the two lines, if not already present, to /etc/modprobe.conf:
alias net-pf-10 off
alias ipv6 off
add the command to blacklist（/etc/modprobe.d/blacklist） instead as shown below:
blacklist net-pf-10
Note: Try to copy-paste these lines instead of typing them. I faced problems in one computer after typing it in. It wasn't something which was visible to me on casual inspection but copy-paste solved it.
2. Open /etc/sysconfig/network and look for the line containing NETWORKING_IPV6 and change the value to no as shown below:
NETWORKING_IPV6=no
3. Stop ip6tables firewall:
/sbin/service ip6tables stop
4. Prevent the ip6tables firewall from coming up ever again:
/sbin/chkconfig ip6tables off
5. Restart your network to see if everything is working correctly:
/sbin/service network restart
6. Some articles suggest rebooting the machine at this stage so you may do that too.
按照上面的步骤做完重启电脑重新安装即可！
安装vmware-tools的时候还会出现以下两种情况：
1、what is the location of the gcc program on your machine?
这是因为没有安装gcc的原因，用yum -y install gcc安装即可；
2、What is the location of the directory of C header files that match your running kernel?
用yum -y install kernel-devel安装即可
页:
[1]