juniper设置流量控制(下载和上传)
juniper srx240，版本12.1R2.9对某个ip流量控制：（192.168.200.200）
set firewall policer policer-one if-exceeding bandwidth-limit 50k
set firewall policer policer-one if-exceeding burst-size-limit 50k
#最小为3000b
set firewall policer policer-one then discard
set firewall filter rate-limit term 1 from source-address 192.168.200.200/32
set firewall filter rate-limit term 1 from destination-address 0.0.0.0/0
set firewall filter rate-limit term 1 from source-port 0-65535
set firewall filter rate-limit term 1 from destination-port 0-65535
set firewall filter rate-limit term 1 then policer policer-one
set interfaces vlan unit 200 family inet filter input rate-limit #下载
set interfaces vlan unit 200 family inet filter output rate-limit #上传
说明：理论下载和上传只有50KB/s，但是生产环境发现限制后使用迅雷下载偶尔出现200KB/s的情况
页:
[1]