vmware中suse10不能上网解决方法
1.在vmware中设置网络连接方式为NAT方式2.打开Network向导，设置IP方式为DHCP方式：
suse10:/etc/sysconfig/network # yast2 network
WARNING: please edit ~/.scim/global and change /DefaultConfigModule to kconfig
3.根据提示修改
suse10:/etc/sysconfig/network # echo "/DefaultConfigModule = kconfig" >> ~/.scim/global
4.重启网络
suse10:/etc/sysconfig/network # rcnetwork start
Hint: you may set mandatory devices in /etc/sysconfig/network/config
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8 done
eth0 device: Advanced Micro Devices 79c970 (rev 10)
eth0 IP address: 192.168.49.129/24 (DHCP was already running)done
Setting up service network..............done
5. 发现可以上网了。但是不知道上一步提示是什么意思。
页:
[1]