iptables shell
#!/bin/bash# A sample firewall shell script
IPT="/sbin/iptables"
SPAMLIST="blockedip"
SPAMDROPMSG="BLOCKED IP DROP"
SYSCTL="/sbin/sysctl"
BLOCKEDIPS="/root/scripts/blocked.ips.txt"
# Stop certain attacks
echo "Setting sysctl IPv4 settings..."
$SYSCTL net.ipv4.ip_forward=0
$SYSCTL net.ipv4.conf.all.send_redirects=0
$SYSCTL net.ipv4.conf.default.send_redirects=0
$SYSCTL net.ipv4.conf.all.accept_source_route=0
$SYSCTL net.ipv4.conf.all.accept_redirects=0
$SYSCTL net.ipv4.conf.all.secure_redirects=0
$SYSCTL net.ipv4.conf.all.log_martians=1
$SYSCTL net.ipv4.conf.default.accept_source_route=0
$SYSCTL net.ipv4.conf.default.accept_redirects=0
$SYSCTL net.ipv4.conf.default.secure_redirects=0
$SYSCTL net.ipv4.icmp_echo_ignore_broadcasts=1
$SYSCTL net.ipv4.icmp_ignore_bogus_error_messages=1
$SYSCTL net.ipv4.tcp_syncookies=1
$SYSCTL net.ipv4.conf.all.rp_filter=1
$SYSCTL net.ipv4.conf.default.rp_filter=1
$SYSCTL kernel.exec-shield=1
$SYSCTL kernel.randomize_va_space=1
echo "Starting IPv4 Firewall..."
$IPT -F
$IPT -X
$IPT -t nat -F
$IPT -t nat -X
$IPT -t mangle -F
$IPT -t mangle -X
# load modules
modprobe ip_conntrack
[ -f "$BLOCKEDIPS" ] && BADIPS=$(egrep -v -E "^#|^$" "${BLOCKEDIPS}")
# interface connected to the Internet
PUB_IF="eth0"
#Unlimited traffic for loopback
$IPT -A INPUT -i lo -j ACCEPT
$IPT -A OUTPUT -o lo -j ACCEPT
# DROP all incomming traffic
$IPT -P INPUT DROP
$IPT -P OUTPUT DROP
$IPT -P FORWARD DROP
if [ -f "${BLOCKEDIPS}" ];
then
# create a new iptables list
$IPT -N $SPAMLIST
for ipblock in $BADIPS
do
$IPT -A $SPAMLIST -s $ipblock -j LOG --log-prefix "$SPAMDROPMSG "
$IPT -A $SPAMLIST -s $ipblock -j DROP
done
$IPT -I INPUT -j $SPAMLIST
$IPT -I OUTPUT -j $SPAMLIST
$IPT -I FORWARD -j $SPAMLIST
fi
# Block sync
$IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW-m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Drop Sync"
$IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -j DROP
# Block Fragments
$IPT -A INPUT -i ${PUB_IF} -f-m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fragments Packets"
$IPT -A INPUT -i ${PUB_IF} -f -j DROP
# Block bad stuff
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL ALL -j DROP
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "NULL Packets"
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -j DROP # NULL packets
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "XMAS Packets"
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP #XMAS
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fin Packets Scan"
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -j DROP # FIN packet scans
$IPT-A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP
# Allow full outgoing connection but no incomming stuff
$IPT -A INPUT -i ${PUB_IF} -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A OUTPUT -o ${PUB_IF} -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
# Allow ssh
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 22 -j ACCEPT
# Allow http / https (open port 80 / 443)
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 80 -j ACCEPT
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 443 -j ACCEPT
# allow incomming ICMP ping pong stuff
$IPT -A INPUT -i ${PUB_IF} -p icmp --icmp-type 8 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPT -A OUTPUT -i ${PUB_IF} -p icmp --icmp-type 0 -m state --state ESTABLISHED,RELATED -j ACCEPT
# Allow port 53 tcp/udp (DNS Server)
$IPT -A INPUT -i ${PUB_IF} -p udp --dport 53 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPT -A OUTPUT -i ${PUB_IF} -p udp --sport 53 -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 53 -m state --state NEW,ESTABLISHED,RELATED-j ACCEPT
$IPT -A OUTPUT -i ${PUB_IF} -p tcp --sport 53 -m state --state ESTABLISHED,RELATED -j ACCEPT
# Open port 110 (pop3) / 143
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 110 -j ACCEPT
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 143 -j ACCEPT
##### Add your rules below ######
#
#
##### END your rules ############
# Do not log smb/windows sharing packets - too much logging
$IPT -A INPUT -p tcp -i ${PUB_IF} --dport 137:139 -j REJECT
$IPT -A INPUT -p udp -i ${PUB_IF} --dport 137:139 -j REJECT
# log everything else and drop
$IPT -A INPUT -j LOG
$IPT -A FORWARD -j LOG
$IPT -A INPUT -j DROP
exit 0
页:
[1]