[转] KVM Internals, code and more
KVMKernel-based Virtual Machine
Internals, code and more http://slides.com/braoru/kvm#/
What behind KVM
QEMU and KVM architecture overview
KVM internals
Very small Introduction to Libvirt
KVM in 5 secondes
[*]Introduced to make VT-x/AMD-V available to user space
[*]Exposes virtualization features securely through a single interface
[*]/dev/kvm
[*]vailable since 2.6.20 (2006)
[*]Clean and efficient dev From first LKML posting to merge: 3 months
[*]100% orthogonal to core kernel
KVM is not KVM
First of all there is QEMU then KVM then Libvirt then the whole ecosystems.. At the begining, Qemu
[*]Running a guest involves executing guest code
[*]Handling timers
[*]Processing I/O
[*]Responding to monitor commands.
[*]Doing all these things at once without pausing guest execution
Deal with events Deal with events
There are two popular architectures for programs that need to respond to events from multiple sources DEAL WITH EVENTS
Parallel architecture
Splits work into processes or threads that can execute simultaneously. DEAL WITH EVENTS
Event-driven architecture
Event-driven architecture reacts to events by running a main loop that dispatches to event handlers.
This is commonly implemented using the select(2) or poll(2) family of system calls to wait on multiple file descriptors. Threading and event driven model of qemu
Qemu uses an hybrid architecture Qemu the event_loop
[*]Event-driven architecture is centered around the event loop which dispatches events to handler functions. QEMU's main event loop is main_loop_wait()
[*]Waits for file descriptors to become readable or writable. File descriptors are a criticalbecause files, sockets, pipes, and various other resources are all file descriptors.
[*]Runs expired timers.
[*]Runs bottom-halves (BHs), whichused to avoid reentrancy and overflowing the call stack.
main-loop.c QEMU THE EVENT_LOOP
A file descriptor becomes ready, a timer expires, or a BH is scheduled, the event loop invokes a callback
[*]No other core code is executing at the same time so synchronization is not necessary
[*]Execute sequentially and atomically
[*]Only 1 thread of control needed at any given time
[*]No blocking system calls or long-running computations should be performed.
[*]Avoid spending an unbounded amount of time in a callback
[*]If you not follow those advices this will force the guest to pause and the monitor to become unresponsive.
QEMU threads
To help the event_loop
Offload what need to be offloaded QEMU THREADS
TO HELP THE EVENT_LOOP
[*]There are system calls which have no non-blocking equivalent.
[*]Sometimes long-running computations flood the CPU and can't be easily break up into callbacks.
[*]In these cases dedicated worker threads can be used to carefully move these tasks out of core QEMU.
[*]One example of worker threads is vnc-jobs.c
[*]When a worker thread needs to notify core QEMU, a pipe or a qemu_eventfd() file descriptor is added to the event loop.
executing guest code
Here are two mechanism for executing guest code: Tiny Code Generator (TCG) and KVM
Executing guest code in qemu is very simple, it use thread.
Exactly 1 thread by vcpu. summary about qemu processing
[*]1 process per guest
[*]1 thread for the main event_loop()
[*]1 thread by vcpu
[*]As many (reasonably) threads as needed for offloaded tasks
All the existing Linux strengths at our disposal
Memory as Huge page, KSM, IO, Scheduler, Energy, Device hotplug, networking, Security, All the Linux software world, ... qemu guest memory
Guest ram is allocated at qemu start up
This mapped memory is "really" allocated by the process (with malloc())
qemu_madvise()
Tips : use -mem-path to give qemu a memory image to load (can be very very good in #infosec) reminder
why x86 virt is a pain...
[*]No hardware provisions
[*]Instruction behave differently depending on privilege context
[*]Architecture not built for trap and emulate
[*]CISC is ... CISC
A complete theorical virtualisation courses : CS 686: Special Topic: Intel EM64T and VT Extensions (Spring 2007) reminder
how intel vt-x help
Guest SWVMMTransitions
Virtual-machine control structure KVM virtualisation
KVM is a virtualization feature in the Linux kernel that lets you safely execute guest code directly on the host CPU
[*]open /dev/kvm
[*]use iocrl KVM_RUN (KVM IOCTL doc)
As simple as :open("/dev/kvm")
ioctl(KVM_CREATE_VM)
ioctl(KVM_CREATE_VCPU)
for (;;) {
ioctl(KVM_RUN)
switch (exit_reason) {
case KVM_EXIT_IO:/* ... */
case KVM_EXIT_HLT: /* ... */
}
}
kvm virtualisation
It's DEMO time
What do you need :
[*]A bit of C ...
[*]A touch of ASM
[*]Makefile
[*]gcc
EMU / KVM / CPU / TIME interactions
Light vs Heavy exit
QEMU / KVM / CPU / TIME interactions
causes of VM Exits
VM Entry :
[*]Transition from VMM to Guest
[*]Enters VMX non-root operation
[*]Loads Guest state and Exit criteria from VMCS
[*]VMLAUNCH instruction used on initial entry
[*]VMRESUME instruction used on subsequent entries
VM Exit :
[*]VMEXIT instruction used on transition from Guest to VMM
[*]Enters VMX root operation
[*]Saves Guest state in VMCS
[*]Loads VMM state from VMCS
start a kvm vm in reality
A bit more complicated than before :
[*]KVM CREATE VM : The new VM has no virtual cpus and no memory
[*]KVM SET USER MEMORY REGION : MAP userspace memory for the VM
[*]KVM CREATE IRQCHIP / ...PIT KVM CREATE VCPU : Create hardware component and map them with VT-X functionnalities
[*]KVM SET REGS / ...SREGS / ...FPU / ... KVM SET CPUID / ...MSRS / ...VCPU EVENTS / ... KVM SET LAPIC : hardware configurations
[*]KVM RUN : Start the VM
start a vm in qemu-kvm
/usr/bin/qemu-kvm -S -M pc-0.13 -enable-kvm -m 512 -smp 2,sockets=2,cores=1,threads=1
-name test -uuid e9b4c7be-d60a-c16e-92c3-166421b4daca -nodefcon?g -nodefaults
-chardev socket,id=monitor,path=/var/lib/libvirt/qemu/test.monitor,server,nowait
-mon chardev=monitor,mode=readline -rtc base=utc -boot c
-drive ?le=/var/lib/libvirt/images/test.img,if=none,id=drive-virtio-disk0,boot=on,format=raw
-device virtio-blk-pci,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0
-drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw
-device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0
-device virtio-net-pci,vlan=0,id=net0,mac=52:54:00:cc:1c:10,bus=pci.0,addr=0x3
-net tap,fd=59,vlan=0,name=hostnet0 -chardev pty,id=serial0 -device isa-serial,chardev=serial0
-usb -device usb-tablet,id=input0 -vnc 127.0.0.1:0 -vga cirrus -device AC97,id=sound0,bus=pci.0,addr=0x4
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6
Now you really know why tools are great
KVM processing
What about passthroug, paravirt and virtio
Reduce VM exits or make them lightweight
Improve I/O throughput & latency (less emulation)
Compensates virtualization effects
Enable direct host-guest interaction
VIRTIO device
[*]Network
[*]Block
[*]Serial I/O (console, host-guest channel, ...)
[*]Memory balloon
[*]File system (9P)
[*]SCSI
Based on generic RX/TX buffer
Logic distributed in the guest driver (aka virtual device) and qemu backend (and kernel backend in some cases)
Virtio device
vhost example
[*]High throughput
[*]Low latency guest networking
Normally the QEMU userspace process emulates I/O accesses from the guest.
Vhost puts virtio emulation code into the kernel
[*]Dont forget vhost-blk and vhost-scsi
Virtio
vhost example
[*]vhost-net driver creates a /dev/vhost-net character device on the host
[*] QEMU is launched with -netdev tap,vhost=on and open /dev/vhost-net
[*]vhost driver creates a kernel thread called vhost-$pid
[*]$pid = pidof(QEMU)
[*]Job of the worker thread is to handle I/O events and perform the device emulation.
[*]vhost architecture is not directly linked to KVM
[*]Use ioeventfd and irqfd
Virtio device
Virtio device
vhost
Kernel code :
[*]drivers/vhost/vhost.c - common vhost driver code
[*]drivers/vhost/net.c - vhost-net driver
[*]virt/kvm/eventfd.c - ioeventfd and irqfd
The QEMU userspace code shows how to initialize the vhost instance :
[*]hw/vhost.c - common vhost initialization code
[*]hw/vhost_net.c - vhost-net initialization
LIBVIRT
very small introduction
[*]Virtualization library: manage guest on one or many nodes
[*]Share the application stack between hypervisors
[*]Long term stability and compatibility of API and ABI
[*]Provide security and remote access “out of the box”
[*]Expand to management APIs (Node, Storage, Network)
livirt
Very small introduction
页:
[1]