plantegg 发表于 2015-4-10 17:22:43

QEMU KVM Libvirt手册(8): 半虚拟化设备virtio

  KVM本身并不提供半虚拟化功能,是通过virtio来实现的

  The benefits of virtio drivers are of lower overhead and higher performance.Memory Ballooning (virtio_balloon)
  memory ballooning可以动态调整guest的内存的大小
  如果有-m参数,则向更大的内存调整时无效的,但是可以往小的里面调整
  我们首先ssh到guest里面
  ip netns exec qrouter-26a45e0e-a58a-443b-a972-d62c0c5a1323 ssh -i openstack.pem ubuntu@192.168.0.35
  在虚拟机里面看内存的大小

  ubuntu@testinject19:~$ free
             total       used       free   shared    buffers   cached
Mem:       2051748   478276    1573472          0      46620   345908
-/+ buffers/cache:      85748    1966000
Swap:            0          0          0  在Monitor上看balloon的大小

  root:/home/cliu8# virsh qemu-monitor-command instance-00000024 --hmp "info balloon"
balloon: actual=2048
  我们试图往大里调整
  root:/home/cliu8# virsh qemu-monitor-command instance-00000024 --hmp "balloon 4096"
  发现无效  root:/home/cliu8# virsh qemu-monitor-command instance-00000024 --hmp "info balloon"
balloon: actual=2048
ubuntu@testinject19:~$ free
             total       used       free   shared    buffers   cached
Mem:       2051748   478276    1573472          0      46628   345920
-/+ buffers/cache:      85728    1966020
Swap:            0          0          0
  我们往小里调整内存
  root:/home/cliu8# virsh qemu-monitor-command instance-00000024 --hmp "balloon 1024"
  发现生效了
  root:/home/cliu8# virsh qemu-monitor-command instance-00000024 --hmp "info balloon"
balloon: actual=1024
  ubuntu@testinject19:~$ free
             total       used       free   shared    buffers   cached
Mem:       1003172   470796   532376          0      46636   345920
-/+ buffers/cache:      78240   924932
Swap:            0          0          0  有了balloon,如果guest需要更多的RAM,则可以给它增加一些内存。如果guest不需要那么多内存,可以通过balloon从中拿出一部分内存。这个过程,不需要启停虚拟机。
  balloon driver像是一个特殊的process,运行在guest机器上,它可以扩大自己的内存,使得其他的应用程序的内存减少,也可以缩小内存,使得其他的应用程序内存增加。


  guest中的balloon driver通过virtio channel和host进行交互,接收host发来的命令,比如发来的命令式减少内存,则balloon driver就扩大它的内存占有量。
  然后balloon driver将自己占有的内存交回给host,使得host有了更多的内存。

  对于libvirt而言,有currentMemory和maxMemory两种概念,maxMemory就是-m参数设定的,currentMemory就是balloon设定的。
Para-virtualized network interface cards (virtio_net)

  -netdev tap,fd=32,id=hostnet0,vhost=on,vhostfd=37
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=fa:16:3e:d1:2d:99,bus=pci.0,addr=0x3Para-virtualized block devices (virtio_blk)

  -drive file=/var/lib/nova/instances/1f8e6f7e-5a70-4780-89c1-464dc0e7f308/disk,if=none,id=drive-virtio-disk0,format=qcow2,cache=none
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1
页: [1]
查看完整版本: QEMU KVM Libvirt手册(8): 半虚拟化设备virtio