LVS 集群配置
用yum安装（先检查下yum是否可用，如果可用，就用yum安装）#yum install ipvsadm piranha
修改LVS配置
#cd /etc/sysconfig/ha/
先对lvs默认配置文件进行备份，再创建新的配置文件
#mv lvs.cf lvs.cf.back
#vi lvs.cf ####内容如下
serial_no = 39
primary = 10.5.20.12
service = lvs
backup_active = 1
backup = 10.5.20.13
heartbeat = 1
heartbeat_port = 539
keepalive = 3
deadtime = 9
network = direct
debug_level = NONE
monitor_links = 0
syncdaemon = 0
virtual XP {
active = 1
address = 10.5.20.14 bond0:0
vip_nmask = 255.255.255.0
port = 80
send = "GET / HTTP/1.0\r\n\r\n"
expect = "HTTP"
use_regex = 0
load_monitor = none
scheduler = wlc
protocol = tcp
timeout = 5
reentry = 5
quiesce_server = 0
server xp1 {
address = 10.5.20.12
active = 1
weight = 1
}
server xp2 {
address = 10.5.20.13
active = 1
weight = 1
}
}
在两台物理机上分别启动心跳服务:
#service pulse start
Starting pulse:
这时，能在主物理机10.5.20.12上看到负载均衡网卡已启动,
而10.5.20.13上是没有这个网卡的:
# ifconfig
bond0 Link encap:EthernetHWaddr 00:0C:29:E9:2F:F0
inet addr:10.5.20.12Bcast:10.5.23.255Mask:255.255.252.0
inet6 addr: fe80::20c:29ff:fee9:2ff0/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICASTMTU:1500Metric:1
RX packets:2039549 errors:0 dropped:0 overruns:0 frame:0
TX packets:692572 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:748901428 (714.2 MiB)TX bytes:153254084 (146.1 MiB)
bond0:0 Link encap:EthernetHWaddr 00:0C:29:E9:2F:F0
inet addr:10.5.20.14Bcast:10.5.20.255Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICASTMTU:1500Metric:1
当主物理机的服务关闭时，在10.5.20.13上看到网卡已启动:
# ifconfig
bond0 Link encap:EthernetHWaddr 00:0C:29:4C:FC:A4
inet addr:10.5.20.13Bcast:10.5.23.255Mask:255.255.252.0
inet6 addr: fe80::20c:29ff:fe4c:fca4/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICASTMTU:1500Metric:1
RX packets:19679 errors:0 dropped:0 overruns:0 frame:0
TX packets:16633 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:18527316 (17.6 MiB)TX bytes:1528599 (1.4 MiB)
bond0:0 Link encap:EthernetHWaddr 00:0C:29:4C:FC:A4
inet addr:10.5.20.14Bcast:10.5.20.255Mask:255.255.255.0
UP BROADCAST RUNNING MASTER MULTICASTMTU:1500Metric:1
查看虚拟服务器状态:
# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP10.5.20.14:80 wlc
将服务设成开机自启动:
# chkconfig --level 345 pulse on
页:
[1]