二、安装PHP 5.2.14（FastCGI模式）【LNMP安装 】
1、编译安装PHP 5.2.14所需的支持库：注意：下面的libiconv比如装在/usr/local下因为php在make会需要
tar zxvf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure --prefix=/usr/local
make
make install
cd ../
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../
tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../
2、编译安装MySQL 5.5.3-m3/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.5.3-m3.tar.gz
cd mysql-5.5.3-m3/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=partition,innobase,myisammrg
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cd ../
附：以下为附加步骤，如果你想在这台服务器上运行MySQL数据库，则执行以下几步。如果你只是希望让PHP支持MySQL扩展库，能够连接其他服务器上的MySQL数据库，那么，以下两步无需执行。
①、创建MySQL数据库存放目录mkdir -p /data0/mysql/3306/data/
mkdir -p /data0/mysql/3306/binlog/
mkdir -p /data0/mysql/3306/relaylog/
chown -R mysql:mysql /data0/mysql/
②、以mysql用户帐号的身份建立数据表：/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/data0/mysql/3306/data --user=mysql
③、创建my.cnf配置文件：vi /data0/mysql/3306/my.cnf
输入以下内容：引用
character-set-server = utf8
port = 3306
socket= /tmp/mysql.sock
character-set-server = utf8
replicate-ignore-db = mysql
replicate-ignore-db = test
replicate-ignore-db = information_schema
user = mysql
port = 3306
socket= /tmp/mysql.sock
basedir = /usr/local/webserver/mysql
datadir = /data0/mysql/3306/data
log-error = /data0/mysql/3306/mysql_error.log
pid-file = /data0/mysql/3306/mysql.pid
open_files_limit = 10240
back_log = 600
max_connections = 5000
max_connect_errors = 6000
table_cache = 614
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 1M
join_buffer_size = 1M
thread_cache_size = 300
#thread_concurrency = 8
query_cache_size = 512M
query_cache_limit = 2M
query_cache_min_res_unit = 2k
default-storage-engine = MyISAM
thread_stack = 192K
transaction_isolation = READ-COMMITTED
tmp_table_size = 246M
max_heap_table_size = 246M
long_query_time = 3
log-slave-updates
log-bin = /data0/mysql/3306/binlog/binlog
binlog_cache_size = 4M
binlog_format = MIXED
max_binlog_cache_size = 8M
max_binlog_size = 1G
relay-log-index = /data0/mysql/3306/relaylog/relaylog
relay-log-info-file = /data0/mysql/3306/relaylog/relaylog
relay-log = /data0/mysql/3306/relaylog/relaylog
expire_logs_days = 30
key_buffer_size = 256M
read_buffer_size = 1M
read_rnd_buffer_size = 16M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_repair_threads = 1
myisam_recover
interactive_timeout = 120
wait_timeout = 120
skip-name-resolve
#master-connect-retry = 10
slave-skip-errors = 1032,1062,126,1114,1146,1048,1396
#master-host = 192.168.1.2
#master-user = username
#master-password = password
#master-port =3306
server-id = 1
innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 512M
innodb_data_file_path = ibdata1:256M:autoextend
innodb_file_io_threads = 4
innodb_thread_concurrency = 8
innodb_flush_log_at_trx_commit = 2
innodb_log_buffer_size = 16M
innodb_log_file_size = 128M
innodb_log_files_in_group = 3
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
innodb_file_per_table = 0
#log-slow-queries = /data0/mysql/3306/slow.log
#long_query_time = 10
quick
max_allowed_packet = 32M
④、创建管理MySQL数据库的shell脚本：vi /data0/mysql/3306/mysql
输入以下内容（这里的用户名admin和密码12345678接下来的步骤会创建）：#!/bin/sh
mysql_port=3306
mysql_username="admin"
mysql_password="12345678"
function_start_mysql()
{
printf "Starting MySQL...\n"
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/data0/mysql/${mysql_port}/my.cnf 2>&1 > /dev/null &
}
function_stop_mysql()
{
printf "Stoping MySQL...\n"
/usr/local/webserver/mysql/bin/mysqladmin -u ${mysql_username} -p${mysql_password} -S /tmp/mysql.sock shutdown
}
function_restart_mysql()
{
printf "Restarting MySQL...\n"
function_stop_mysql
sleep 5
function_start_mysql
}
function_kill_mysql()
{
kill -9 $(ps -ef | grep 'bin/mysqld_safe' | grep ${mysql_port} | awk '{printf $2}')
kill -9 $(ps -ef | grep 'libexec/mysqld' | grep ${mysql_port} | awk '{printf $2}')
}
if [ "$1" = "start" ]; then
function_start_mysql
elif [ "$1" = "stop" ]; then
function_stop_mysql
elif [ "$1" = "restart" ]; then
function_restart_mysql
elif [ "$1" = "kill" ]; then
function_kill_mysql
else
printf "Usage: /data0/mysql/${mysql_port}/mysql {start|stop|restart|kill}\n"
fi
注意：如果上面报错语法错误
｛
注释掉function_kill_mysql方法和调用
｝
⑤、赋予shell脚本可执行权限：chmod +x /data0/mysql/3306/mysql
⑥、启动MySQL：/data0/mysql/3306/mysql start
⑦、通过命令行登录管理MySQL服务器（提示输入密码时直接回车）：/usr/local/webserver/mysql/bin/mysql -u root -p -S /tmp/mysql.sock
⑧、输入以下SQL语句，创建一个具有root权限的用户（admin）和密码（12345678）：GRANT ALL PRIVILEGES ON *.* TO 'admin'@'localhost' IDENTIFIED BY '12345678';
GRANT ALL PRIVILEGES ON *.* TO 'admin'@'127.0.0.1' IDENTIFIED BY '12345678';
⑨、（可选）停止MySQL：/data0/mysql/3306/mysql stop
3、编译安装PHP（FastCGI模式）tar zxvf php-5.2.14.tar.gz
gzip -cd php-5.2.14-fpm-0.5.14.diff.gz | patch -d php-5.2.14 -p1
cd php-5.2.14/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
注意：如果配置php报错，且机器是64位系统：
｛
1.如果提示"configure: error: libjpeg.(a|so) not found"错误
所以这里我们需要复制一份libjpeg.so到/usr/lib/目录里才可以.再次执行./configure命令即可.
cp -frp /usr/lib64/libjpeg.* /usr/lib/2.注意过程中还会提示" Configure: error: libpng.(also) not found."错误,解决办法和上面的一样.
cp -frp /usr/lib64/libpng* /usr/lib/3.如果提示"configure: error: Cannot find ldap libraries in /usr/lib."的话.
cp -frp /usr/lib64/libldap* /usr/lib/
4.如果提示：/usr/bin/ld: cannot find -liconv
需要查看是否安装了libiconv 和是否在/usr/local下。且/usr/lib 下存在libiconv.so文件，如果不存在需要查找libiconv.so到/usr/lib下。
说明:
通过上面的搜索其实就知道一些原因了,configure一般的搜索编译路径为/usr/lib/下,因为php默认就在/usr/lib/下找相关库文件,而x64机器上是在:/usr/lib64.这时你就可以直接把需要的库文件从/usr/lib64中拷贝到/usr/lib/中去就可以了.
｝
上面的make之后要运行make install,而且如果是64位操作系统 则可能报错。
如果报错：缺少libicon.so.2 那么只需要更改/etc/ld.so.conf 增加一行: /usr/local/lib
然后运行：/sbin/sdconfig
如果继续报错：/usr/lib64/mysqlclient.so is empty 那么则需要删除这个空文件，并复制/usr/local/webserver/mysql/lib/mysqlclient.so文件过来
继续执行/sbin/sdconfig
4、编译安装PHP5扩展模块tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../
tar jxvf eaccelerator-0.9.6.1.tar.bz2
cd eaccelerator-0.9.6.1/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../
tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
cd ../
tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../
tar zxvf imagick-2.3.0.tgz
cd imagick-2.3.0/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../
5、修改php.ini文件
手工修改：查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
并在此行后增加以下几行，然后保存：
extension = "memcache.so"
extension = "pdo_mysql.so"
extension = "imagick.so"
再查找output_buffering = Off
修改为output_buffering = On
再查找; cgi.fix_pathinfo=0
修改为cgi.fix_pathinfo=0，防止Nginx文件类型错误解析漏洞。
自动修改：若嫌手工修改麻烦，可执行以下shell命令，自动完成对php.ini文件的修改：sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/webserver/php/etc/php.ini
sed -i "s#; always_populate_raw_post_data = On#always_populate_raw_post_data = On#g" /usr/local/webserver/php/etc/php.ini
sed -i "s#; cgi.fix_pathinfo=0#cgi.fix_pathinfo=0#g" /usr/local/webserver/php/etc/php.ini
6、配置eAccelerator加速PHP：mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini
按shift+g键跳到配置文件的最末尾，加上以下配置信息：引用
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
7、创建www用户和组，以及供blog.s135.com和www.s135.com两个虚拟主机使用的目录：/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /data0/htdocs/blog
chmod +w /data0/htdocs/blog
chown -R www:www /data0/htdocs/blog
mkdir -p /data0/htdocs/www
chmod +w /data0/htdocs/www
chown -R www:www /data0/htdocs/www
8、创建php-fpm配置文件（php-fpm是为PHP打的一个FastCGI管理补丁，可以平滑变更php.ini配置而无需重启php-cgi）：
在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件：rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf
输入以下内容（如果您安装 Nginx + PHP 用于程序调试，请将以下的0改为1，以便显示PHP错误信息，否则，Nginx 会报状态为500的空白错误页）：
All relative paths in this config are relative to php's install prefix
Pid file
/usr/local/webserver/php/logs/php-fpm.pid
Error log file
/usr/local/webserver/php/logs/php-fpm.log
Log level
notice
When this amount of php processes exited with SIGSEGV or SIGBUS ...
10
... in a less than this interval of time, a graceful restart will be initiated.
Useful to work around accidental curruptions in accelerator's shared memory.
1m
Time limit on waiting child's reaction on signals from master
5s
Set to 'no' to debug fpm
yes
Name of pool. Used in logs and stats.
default
Address to accept fastcgi requests on.
Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
127.0.0.1:9000
Set listen(2) backlog
-1
Set permissions for unix socket, if one used.
In Linux read/write permissions must be set in order to allow connections from web server.
Many BSD-derrived systems allow connections regardless of permissions.
0666
Additional php.ini defines, specific to this pool of workers.
/usr/sbin/sendmail -t -i
0
Unix user of processes
www
Unix group of processes
www
Process manager settings
Sets style of controling worker process count.
Valid values are 'static' and 'apache-like'
static
Sets the limit on the number of simultaneous requests that will be served.
Equivalent to Apache MaxClients directive.
Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
Used with any pm_style.
128
Settings group for 'apache-like' pm style
Sets the number of server processes created on startup.
Used only when 'apache-like' pm_style is selected
20
Sets the desired minimum number of idle server processes.
Used only when 'apache-like' pm_style is selected
5
Sets the desired maximum number of idle server processes.
Used only when 'apache-like' pm_style is selected
35
The timeout (in seconds) for serving a single request after which the worker process will be terminated
Should be used when 'max_execution_time' ini option does not stop script execution for some reason
'0s' means 'off'
0s
The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
'0s' means 'off'
0s
The log file for slow requests
logs/slow.log
Set open file desc rlimit
65535
Set max core size rlimit
0
Chroot to this directory at the start, absolute path
Chdir to this directory at the start, absolute path
Redirect workers' stdout and stderr into main error log.
If not set, they will be redirected to /dev/null, according to FastCGI specs
yes
How much requests each process should execute before respawn.
Useful to work around memory leaks in 3rd party libraries.
For endless request processing please specify 0
Equivalent to PHP_FCGI_MAX_REQUESTS
1024
Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
Makes sense only with AF_INET listening socket.
127.0.0.1
Pass environment variables like LD_LIBRARY_PATH
All $VARIABLEs are taken from current environment
$HOSTNAME
/usr/local/bin:/usr/bin:/bin
/tmp
/tmp
/tmp
$OSTYPE
$MACHTYPE
2
9、启动php-cgi进程，监听127.0.0.1的9000端口，进程数为128（如果服务器内存小于3GB，可以只开启64个进程），用户为www：ulimit -SHn 65535
/usr/local/webserver/php/sbin/php-fpm start
注：/usr/local/webserver/php/sbin/php-fpm还有其他参数，包括：start|stop|quit|restart|reload|logrotate，修改php.ini后不重启php-cgi，重新加载配置文件使用reload。
页:
[1]