CentOS6.5环境下布署LVS+keepalived
lvs-master：192.168.9.201lvs-backup：192.168.9.202
vip：192.168.9.200
web1：192.168.9.203
web2：192.168.9.204
netmask：255.255.255.0
gateway：192.168.9.1
网络拓扑：
http://img1.运维网.com/attachment/201010/154055336.jpg
echo "============================ 更新系统时间 ======================"
yum install -y ntp
ntpdate time.nist.gov
echo "00 01 * * * /usr/sbin/ntpdate time.nist.gov" /etc/crontab
echo “============================ 关闭不用服务 =======================”
/root/del_servcie.sh # 附件中自定义脚本
echo “========================= 安装ipvsadm、keepalived ==================”
# cd /usr/local/src
# wget http://www.linuxvirtualserver.org/software/kernel-2.6/ipvsadm-1.24.tar.gz
# wget http://www.keepalived.org/software/keepalived-1.1.17.tar.gz
# ln -sv /usr/src/kernels/2.6.18-194.el5-i686/ /usr/src/linux
# tar -zxvf ipvsadm-1.24.tar.gz
# cd ipvsadm-1.24
# make;make install
# cd ..
# tar -zxvf keepalived-1.1.17.tar.gz
# cd keepalived-1.1.17
# ./configure
# make;make install
编译的时候出现这个提示，说明keepalived和内核结合了，如果不是这样的，需要加上这个参数./configure --with-kernel-
dir=/kernel/path
Keepalived configuration
------------------------
Keepalived version : 1.1.17
Compiler : gcc
Compiler flags : -g -O2
Extra Lib : -lpopt -lssl -lcrypto
Use IPVS Framework : Yes
IPVS sync daemon support : Yes
Use VRRP Framework : Yes
Use LinkWatch : No
Use Debug flags : No
echo “======================= 配置keepalived ===========================”
#cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/
#cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
#mkdir /etc/keepalived
#cp /usr/local/sbin/keepalived /usr/sbin/
# vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
king_819@163.com
}
notification_email_from king_819@163.com
smtp_server smtp.163.com
# smtp_connect_timeout 30
router_id LVS_DEVEL
}
# VIP1
vrrp_instance VI_1 {
state MASTER #备份服务器上将MASTER改为BACKUP
interface eth0 #网卡名称
lvs_sync_daemon_inteface eth0
virtual_router_id 51
priority 100 # 备份服务上将100改为90
advert_int 5
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.9.200
#(如果有多个VIP，继续换行填写.)
}
}
virtual_server 192.168.9.200 80 {
delay_loop 6 #(每隔10秒查询realserver状态)
lb_algo wlc #(lvs 算法)
lb_kind DR #(Direct Route)
persistence_timeout 60 #(同一IP的连接60秒内被分配到同一台realserver)
protocol TCP #(用TCP协议检查realserver状态)
real_server 192.168.9.203 80 {
weight 100 #(权重)
TCP_CHECK {
connect_timeout 10 #(10秒无响应超时)
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
real_server 192.168.9.204 80 {
weight 100
TCP_CHECK {
connect_timeout 10
nb_get_retry 3
delay_before_retry 3
connect_port 80
}
}
}
#service keepalived start|stop
# chkconfig –level 2345 keepalived on
echo “====================== 配置realserver =========================”
在web服务器上执行脚本添加vip
# vi /root/lvs_real.sh
#!/bin/bash
# description: Config realserver
#Written by : http://kerry.blog.运维网.com
SNS_VIP=192.168.9.200
. /etc/rc.d/init.d/functions
case "$1" in
start)
/sbin/ifconfig lo:0 $SNS_VIP netmask 255.255.255.255 broadcast $SNS_VIP
/sbin/route add -host $SNS_VIP dev lo:0
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p >/dev/null 2>&1
echo "RealServer Start OK"
;;
stop)
/sbin/ifconfig lo:0 down
/sbin/route del $SNS_VIP >/dev/null 2>&1
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
echo "RealServer Stoped"
;;
*)
echo "Usage: $0 {start|stop}"
exit 1
esac
exit 0
# chmod +x /roo/lvs_real.sh
# /root/lvs_real.sh start
# ifconfighttp://img1.运维网.com/attachment/201010/154138720.jpg
# echo “/root/lvs_real.sh start” >> /etc/rc.local
echo “===================== 测试LVS+keepalived ========================”
#LVS_master、LVS_backup上开启keepalived，LVS_master先绑定VIP
/sbin/ifconfig eth1:0 inet VIP netmask 255.255.255.255 #此处先只在master上加，如果master挂掉，backup会自动启用
LVS_master：
http://img1.运维网.com/attachment/201010/154209809.jpg
LVS_backup：
http://img1.运维网.com/attachment/201010/154241173.jpg
#解析域名，测试访问，LVS转发
或者可以用/etc/init.d/ipvsadm status 查看（ipvsadm有时候看不到IP）
http://img1.运维网.com/attachment/201010/154407568.jpg
#测试关闭LVS_master，短暂的掉包后，LVS_backup马上接替工作
http://img1.运维网.com/attachment/201010/154438783.jpg
LVS_backup接替LVS_master绑定VIP
http://img1.运维网.com/attachment/201010/154506634.jpg
LVS_backup负责转发
http://img1.运维网.com/attachment/201010/154530799.jpg
LVS_master重启完成后，就会自动接回控制权，继续负责转发
http://img1.运维网.com/attachment/201010/154552509.jpg
#测试关闭其中一台realserver
http://img1.运维网.com/attachment/201010/154613452.jpg
通过上面测试可以知道，当realserver故障或者无法提供服务时，负载均衡器通过健康检查自动把失效的机器从转发队列删除掉，
实现故障隔离，保证用户的访问不受影响
#重启被关闭的realserver
http://img1.运维网.com/attachment/201010/154632533.jpg
当realserver故障恢复后，负载均衡器通过健康检查自动把恢复后的机器添加到转发队列中
常见问题：
1：master挂掉后，备的没有自动接起服务
首先检查备的vip是否有启动，如果没启动，仔细检查配置文件keepalived.conf里面的vrrp_instance里的interface是否为实际网卡的名称。
2：启动keepalived后vip没有启动
检查配置文件是否在/etc/keepalived/下 如果在别的地方移动到/etc/keepalived/下，尝试过日过不在和个地方就会报错
页:
[1]