nagios监控配置详解三告警相关模板
###########################################################################定义针对主机的告警条件
########################################################################
# Generic host definition template - This is NOT a real host, just a template!
define host{
name generic-host ; The name of this host template模板名称，要用在另外一个配置文件里
notifications_enabled 1 ; Host notifications are enabled
event_handler_enabled 1 ; Host event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
failure_prediction_enabled 1 ; Failure prediction is enabled
process_perf_data 1 ; Process performance data
retain_status_information 1 ; Retain status information across program restarts
retain_nonstatus_information 1 ; Retain non-status information across program restarts
check_command check-host-alive
notification_interval 0 //0关闭重复报警，>0 可重复告警。如果开启重复报警，设置的值需要大于等于正常检查的间隔时间
normal_check_interval 5 //正常检查间隔时间
retry_check_interval 1 //重试检查间隔
max_check_attempts 3 //最大重试次数
check_period24x7 //检查时间段的名称，具体的时间周期是在timeperiod里设置
notification_period 24x7 //告警时间段
notification_options d,u,r //告警状态
notification_interval 10 //告警间隔
contact_groupsadmins //联系人组
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
}
########################################################################
###定义针对服务的告警条件，各参数的意义同上所述
########################################################################
# generic service template definition
define service{
namegeneric-service; The 'name' of this service template
active_checks_enabled 1 ; Active service checks are enabled
passive_checks_enabled 1 ; Passive service checks are enabled/accepted
parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems)
obsess_over_service 1 ; We should obsess over this service (if necessary)
check_freshness 0 ; Default is to NOT check service 'freshness'
notifications_enabled 1 ; Service notifications are enabled
event_handler_enabled 1 ; Service event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
failure_prediction_enabled 1 ; Failure prediction is enabled
process_perf_data 1 ; Process performance data
retain_status_information 1 ; Retain status information across program restarts
retain_nonstatus_information 1 ; Retain non-status information across program restarts
notification_interval 3 ; Only send notifications on status change by default.
is_volatile 0
check_period 24x7
normal_check_interval 3
retry_check_interval 1
max_check_attempts 3
notification_period 24x7
notification_options w,u,c,r
contact_groups admins
register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
}
页:
[1]