nagios的网络监控
nagios对网络的监控，当达到某个设定的值，那么就报警借助于网上提供的资源，做下面的操作
https://github.com/cloved/check_traffic/releases下载最新版本的shell脚本
下载check_traffic.shV1.4.0，在附件已经上传
#被监控端/客户端
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
cd /usr/local/nagios/libexec/#下载此脚本
chmod 755 check_traffic.sh
# yum install net-snmp-utils net-snmp net-snmp-libs bc -y#因脚本里面需要用到bc
# mv /etc/snmp/snmpd.conf /etc/snmp/snmpd.conf.bak
# vim /etc/snmp/snmpd.conf #配置snmp
# cat /etc/snmp/snmpd.conf|grep -v ^\# |sed '/^$/d'
com2sec notConfigUserdefault public
group notConfigGroup v1 notConfigUser
group notConfigGroup v2c notConfigUser
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1
accessnotConfigGroup "" any noauth exactall none none
view all included.1 80
view mib2 included.iso.org.dod.internet.mgmt.mib-2 fc
access notConfigGroup "" any noauth exactall none none
syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
dontLogTCPWrappersConnects yes
# service snmpd start
# snmpd -L #测试snmp配置文件
Error opening specified endpoint ""
Server Exiting with code 1
# ./check_traffic.sh -V 2c -C public -H localhost -L -vvvv#测试本机的网口，主要的数值是index后面的数字
List Interface for host localhost.
Interface index 1 orresponding tolo
Interface index 2 orresponding toeth0
Interface index 3 orresponding toeth1
# ./check_traffic.sh -V 2c -C public -H 127.0.0.1 -I 2 -w 2000,3000 -c 3001,5000 -K –B
OK - It is the first time of this plugins to run, or some data file lost. We will get the data from the next time.
# ll /var/tmp/check_traffic_127.0.0.1_2__itnms.hist_dat_64 #检查权限，所属用户和组都为nagios
#此脚本有帮助说明，用-h查看，上面 -I 2 即是对eth0做监控，-w 2000,3000是流入2000K/s，或发送3000K/s会提示warning
# -V 1|2c|3
# Specify the version of snmp
#
# -C Community
# Specify the Community
#
# -H host
# Specify the host
#
# -6 Use 64 bit counter, ifHC*instead of if*.
#
# -r Use Range instead of single value in warning and critical Threshold;
#
# -I interface
# Specify the interface
#
# -N interface name
# Specify the interface name
#
# -L List all Interfaces on specify host
#
# -B/bSwitch to B/s or bps, default is -b, bps
#
# -K/MSwitch to K or M (bsp,B/s), default is -K
#被监控端/客户端
1
2
3
vim /usr/local/nagios/etc/nrpe.cfg
command=/usr/local/nagios/libexec/check_traffic.sh -V 2c -C public -H 127.0.0.1 -I 2 -w 2000,4000 -c 4000,6000 -K -B
# service nrped restart
#监控端/服务端
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
vim /usr/local/nagios/etc/objects/linuxhost.cfg
define host{
use mylinux-server,service-pnp
host_name 192_168_23_2
alias server tongji
address 192.168.23.2
}
vim /usr/local/nagios/etc/objects/linux13.cfg
define service{
use linux-service,service-pnp
host_name 192_168_1_2
service_description check network
check_command check_nrpe!check_traffic
}
完事把nagios重启一下，刚开始会搜集数据，如下面的提示 大概2分钟就能看到图形界面了，
PNP4Nagios Version 0.6.24
Please check the documentation for information about the following error.
XML file "/usr/local/pnp4nagios/var/perfdata/192_168_1_2/check_network.xml" not found. <a href="http://docs.pnp4nagios.org/faq/6">Read FAQ online</a>
file :
application/models/data.php :
back
在nagios页面会看到
此图会有in，out的网卡流量，可以在服务器ifstat验证
此外，http://nagios.manubulon.com/ 这个网站也值得一看，里面有 http://nagios.manubulon.com/check_snmp_int.pl 脚本，同样可以实现对网络的监控
check_traffic.sh
#!/bin/bash
#########################################################################
#
# File: check_traffic.sh
# Description:Nagios check plugins to check network interface traffic with SNMP run in *nix.
# Language: GNU Bourne-Again SHell
# Version: 1.4.0
# Date: 2013-11-05
# Corp.: Chenlei
# Author: cloved@gmail.com, chnl@163.com (U can msn me with this), QQ 31017671
# WWW: http://www.itnms.info
# Perl Version: U Can find the perl/Net::SNMP Version in the same site.
#########################################################################
# Bugs:
# The Latest Version will be released in http://bbs.itnms.info.
# You can send bugs to http://bbs.itnms.info,
# or email to me directly: chnl@163.com or cloved@gmail.com
#########################################################################
# Todo:
# Do not use unit at performance data, for pnp/rrd graphing better.
# Add the History performance data file support.(maybe)
# Multi hosts and mult interfaces check function is a quick release, \
# need to review and process the code.
#########################################################################
# ChangeLog:
#
# Version 1.4.0
# 2013-11-05
# Fix bug for Conter64 check.
#
# Version 1.3.11
# 2013-10-09
# Add -Oa option to all snmplwak/snmpget command.
#
# Version 1.3.10
# 2013-01-29
# Set the Default TIMEOUT. Thanks to martin.leeyd.
#
# Version 1.3.9
# 2012-12-05
# Use 'id --user --name' instead of '$USER'
#
# Version 1.3.8
# 2012-09-28
# Add -Oa option to snmplwak command with List Interface function.
#
# Version 1.3.7
# 2012-09-25
# Fix spelling mkstakes of help msgs.
#
# Version 1.3.6
# 2012-09-25
# Fix bug of Conversion K to M. With bps use 1000, with B/s use 1024;
#
# Version 1.3.5
# 2012-09-04
# Give out more suitable help messages when can not get the interface index. Thanks to Jack.
#
# Version 1.3.4
# 2012-08-17
# Fix some spelling mistake. Thanks, Jack.
#
# Version 1.3.3
# 2012-08-16
# 1)Fix some spelling mistake;
# 2)Add support with multi hosts and multi interfaces checks.
#
# Version 1.3.2
# 2012-08-15
# Add -N args support with multi interface checks
#
# Version 1.3.1
# 2012-08-13
# Fix history data time update bug.
#
# Version 1.3.0
# 2012-08-10
# Add support with the -N args, with interface name when to check the single interface.
#
# Version 1.2.12
# 2012-05-20
# Fix bugs for message output.
#
# Version 1.2.11
# 2012-05-20
# Use snmpget instead of snmpwalk for reducing CPU footprint.
#
# Version 1.2.10
# 2012-05-12
# 1)bug fix for debug log
# 2)add "J" to suffix when Jitter option was set
# 3)add "R" to suffix when Range option was set
# 4)some tips in help messages fix
#
# Version 1.2.9
# 2012-05-10
# Fix bugs of the Same host Multi interfaces traffic aggregating and jitter calculating.
#
# Version 1.2.8
# 2012-04-26
# 1) Add the support for multi interfaces checking (in the same host/device) and traffic aggregation.
# Example: -I 2,3 or -I 10,12,16,18
# 2) Add the default suffix "itnms"
# 3) Check bc command
#
# Version 1.2.7
# 2012-04-05
# 1) Add "exit $Severity" at line 927. fix bug for Jitter exit value. Thanks gouldchu.
# 2) U can use "-F s/S" to control the format and get less output.
#
# Version 1.2.6
# 2011-12-13
# Spelling fix, from itnms.net to itnms.info.
#
# Version 1.2.5
# 2011-10-18
# Spelling fix.
#
# Version 1.2.4
# 2011-10-12
# Add snmp v3 support.
#
# Version 1.2.3
# 2011-09-05
# Fix bugs when high traffic occurs -- ifSpeed check error
#
# Version 1.2.2
# 2011-03-11
# Fix bugs with overflow detection. Thanks for jans1086.
#
# Version 1.2.1
# 2010-11-19
# Fix some spelling mistake;
#
# Version 1.2.0
# 2010-04-26
# Change default Scale value from 4 to 2, for more friendly output. If you want more excat value, U can change it for youself.
# Fix the Min Interval check bugs, move the check before write the current data to data hist file.
# Add the Max Interval var, default value is 1800, if the hist data file is too old, drop the result.
# Fix the for output "Maybe 32 bit counter overflow, because we got a negative value here." when check too frequent. And set Min_Interval to 30 as default.
# Add the -F option for simple or more simple(s/S) output format.
# Add the -i option for the individual suffix with the CF/STAT_HIST_DATA if necessary.
# Use the 64bit counter as default, when snmp version is v2c. If the system not support it, use 32bit counter instead.
# Get the interface's IF-MIB::ifSpeed, if the traffic value is bigger than it, drop it and output with OOPS and exit with Unkown.
# Modify the CF_HIST_DATA file namefrom "/var/tmp/check_traffic_${Host}_${Interface}.hist_dat" to
# "/var/tmp/check_traffic_${Host}_${Interface}.hist_dat_${USER}_64|32" for resolving
# 1)user and
# 2)64/32bit
# transfer problem which make
# 1)the hist data file read/write error and
# 2)with huge error traffic value.
# Add the function for testing Traffic Jitter(The orginal idea come from msn chat wiht wjks@hotmail.com).
# Add a option -p N, N(suggest values is from 4 to 12) is a number that we comare this time value with the average value of previos N times
# we had been checked.
# If the value we checked this time is not in our defined scope(a % value) with -w/-c option specified(such as -w 20,20 -c30,30 ),
# we think that it is a traffic jitter.
# For this option, add a file for storing the hist data to stat: /var/tmp/check_traffic_${Host}_${Interface}.hist_dat_${USER}_64|32_ctj_$Num"
#
# Version 1.1.6
# 2009-02-20
# Fix some mistake at perfdata output format with Warning and Critical Value. (thanks for Jiang Shan)
# Remove the redundant code, merge code for --range option.
# Write data before the exit(for the reason of IsFirst), for the next time use.
# When write or read file error, use Unknow instead of Warning severity.
# If get a negative netflow or time interval value here, exit with unknow.
#
# Version 1.1.5
# 2008-09-28
# Fix bug on perfdata output format;
# Fix some spelling mistake;
# Add the Default Value for UseRange as "False";
#
# Version 1.1.4
# 2008-09-18
# Add -roptions, Use Range instead of single value in warning and critical Threshold;
# This option suggestion by zhgypg@hotmail.com at http://www.itnms.info/thread-1220-1-1.html
#
# Version 1.1.3
# 2008-09-17
# Set the default Interval as 12 seconds;
#
# Version 1.1.2
# 2008-08-19
# Check the snmp agent support the 64 bit counter or not;
# Check the interface status, if not OK, exit with Critical status;
# Get the interface name with Interface Index Value;
#
# Version 1.1.1
# 2008-08-06
# Fix some bugs in version compare.
# Use -6 option, use 64 bit counter.
#
# Version 1.1.0
# 2008-06-11
# In snmp v2c, use counters ifHC*instead of if*;
#
# Version 1.0.9
# 2008-04-22
# More friendly output when getting snmp info error.
#
# Version 1.0.8
# 2008-03-31
# Correct some spelling mistake
#
# Version 1.0.7
# 2008-03-28
# If it's the first time to touch hist_dat, echo OK and Tips out;
# Test the hist_dat can be read and write;
# Use the Vars for $OutPut and $PerfData
# Fix some output format.
#
# Version 1.0.6
# 2008-03-25
# Correct Performance data output with Warning and Critical Value of Total and Interval for pnp graphing.
#
# Version 1.0.5
# 2008-03-24
# Correct Performance data output for pnp graphing.
#
# Version 1.0.4
# 2008-03-21
# Correct Performance data output to "Nagios plug-in development guidelines",
# for Graphing the performance data in the web with PNP.
# The standard is: 'label'=value;;;;
#
# Version 1.0.3
# 2008-03-20
# More friendly output with function list_interface().
#
# Version 1.0.2
# 2008-03-06
# Fix some coding bugs;
# Add the -L support;
# -K/-M to speicify in K or M (bps,B/s);
# -B/-b switch to B/s or bps;
# Add Total traffic value in output
#
# Version 1.0.1
# 2008-02-28
# Fix two cacl bugs at line 212 and 244.
# In print_full_help_msg(), '$$' instead $$.
#
# Version 1.0
# 2008-02-27
# Original Version.
#########################################################################
# Heh, just a ad here :), for my honey.
# http://shop35165045.taobao.com/
############################
#
# Exit values:
# ------------
# 0 OK
# 1 Warning
# 2 Cirital
# 3 Unknown
# Others Unknown
#
# ----------------------------------------------------------------------
# These are Parameters from external
# -h
# Get the help message
#
# -v
# Verbose mode, to debug some messages out to the /tmp directory with log file name check_traffic.$$.
#
# -V 1|2c|3
# Specify the version of snmp
#
# -C Community
# Specify the Community
#
# -H host
# Specify the host
#
# -6 Use 64 bit counter, ifHC*instead of if*.
#
# -r Use Range instead of single value in warning and critical Threshold;
#
# -I interface
# Specify the interface
#
# -N interface name
# Specify the interface name
#
# -L List all Interfaces on specify host
#
# -B/bSwitch to B/s or bps, default is -b, bps
#
# -K/MSwitch to K or M (bsp,B/s), default is -K
#
# -w Warning value Kbps, in and out
# -c Critical value Kbps, in and out
# Set Warning and Critical Traffic value
# -F s/S
# Simple or more simple output format
#
# -p number
# It is a number that we comare this time value with the average value of previos N times we had been checked.
# Suggestion values is from 4 to 12.
#
# -i suffix
# It's the individual suffix with the CF/STAT_HIST_DATA if necessary.
# -F s/S
# Get less output with s or S option.
unset LANG
Scale=2
Unit_1="K"
Unit_2="bps"
UseRange="False"
ifIn32="ifInOctets"
ifOut32="ifOutOctets"
ifIn64="ifHCInOctets"
ifOut64="ifHCOutOctets"
# Set the Min Interval of Check.
Min_Interval=30
Max_Interval=1800
# Set the Default TIMEOUT.
Timeout=15
print_help_msg(){
print_version
$Echo "Usage: $0 -h to get help."
$Echo
$Echo 'Report bugs to: cloved@gmail.com'
$Echo 'Home page: <http://bbs.itnms.info/forum.php?mod=viewthread&tid=767&extra=page%3D1>'
$Echo 'Geting help: <http://bbs.itnms.info/forum.php?mod=forumdisplay&fid=10&page=1> or Email to: cloved@gmail.com'
}
print_full_help_msg(){
print_version
$Echo "Usage:"
$Echo "$0 [ -v ] [ -6 ] [ -i Suffix ] [ -F s|S ] [-p N] [ -r ] -V 1|2c|3 ( -C snmp-community | -A \"AuthString\" (when use snmp v3, U must give the AuthString)) -H host [ -L ] (-I interface|-N interface name) -w in,out-warning-value-c in,out-critical-value -K/M -B/b "
$Echo "Example:"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -I 4 -w 200,100 -c 300,200 -K -B"
$Echo "Or"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -N FastEthernet0/1 -w 200,100 -c 300,200 -K -B"
$Echo "Or -r to use Range Value Options:"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -I 4 -r -w 200-300,100-200 -c 100-400,50-250 -K -B"
$Echo "Or"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -N eth0 -r -w 200-300,100-200 -c 100-400,50-250 -K -B"
$Echo "Or -p N to use Traffic Jitter Options:"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -I 4 -p 8 -w 45,45 -c 55,55"
$Echo "Or"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -N eth0 -p 8 -w 45,45 -c 55,55"
$Echo
$Echo "Or for single host and multi interfaces checking (in the same host/device) and traffic aggregation:"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -I 2,3,8,9 -w 200,100 -c 300,200 -K -B"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -N FastEthernet0/1,FastEthernet0/2 -w 200,100 -c 300,200 -K -B"
$Echo "Or -r to use Range Value Options:"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -I 2,3,8,9 -r -w 200-300,100-200 -c 100-400,50-250 -K -B"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -I -N FastEthernet0/1,FastEthernet0/2 -r -w 200-300,100-200 -c 100-400,50-250 -K -B"
$Echo "Or -p N to use Traffic Jitter Options:"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -I 2,3,8,9 -p 8 -w 45,45 -c 55,55"
$Echo "${0} -V 2c -C public -H 127.0.0.1 -N FastEthernet0/1,FastEthernet0/2 -p 8 -w 45,45 -c 55,55"
$Echo
$Echo "Or for multi hosts and mult interfaces checking (in the multi hosts/devices) and traffic aggregation:"
$Echo "${0} -V 2c,1 -C public,private -H 127.0.0.1,10.76.2.15,10.7.4.18 -I 2,2,1 -w 200,100 -c 300,200 -K -B"
$Echo "${0} -V 2c,1 -C public,private -H 127.0.0.1,10.76.2.15,10.7.4.18 -N FastEthernet0/20,FastEthernet0/2,eth0 -w200,100 -c300,200 -KB"
$Echo "Or -r to use Range Value Options:"
$Echo "${0} -V 2c,1 -C public,private -H 127.0.0.1,192.168.1.1 -I 2,3 -w 200-300,100-200 -c 100-400,50-250 -K -B"
$Echo "${0} -V 2c,1 -C public,private -H 127.0.0.1,192.168.1.1 -N FastEthernet0/8,FastEthernet0/2 -r -w 200-300,100-200 -c 100-400,50-250 -K -B"
$Echo "Or -p N to use Traffic Jitter Options:"
$Echo "${0} -V 2c,1 -C public,private -H 127.0.0.1,192.168.1.1 -I 2,3 -p 8 -w 45,45 -c 55,55"
$Echo "${0} -V 2c,1 -C public,private -H 127.0.0.1,192.168.1.1 -N FastEthernet0/21,FastEthernet0/24 -p 8 -w 45,45 -c 55,55"
$Echo
$Echo "If you do not use -K/M -B/b options, default -K -b, corresponding to Kbps."
$Echo "Make sure that the check interval greater than 30 Seconds."
$Echo "Or modify the Min_Interval default value as you need "
$Echo 'And, if you want in Verbose mode, use -v, to check the debug messages in the file /tmp/check_traffic.$$.'
$Echo
$Echo "Or use $0 [ -v ] -V 1|2c|3 -C snmp-community -H host -L "
$Echo "To list all interfaces on the host."
$Echo
$Echo "Or check for snmp v3 device:"
$Echo "${0} -V 3 -A \"-u kschmidt -l authPriv -a MD5 -A mysecretpass -x DES -X mypassphrase\" -H 127.0.0.1 -I 4 -w 200,100 -c 300,200 -K -B"
$Echo "Or"
$Echo "${0} -V 3 -A \"-u kschmidt -l authPriv -a MD5 -A mysecretpass -x DES -X mypassphrase\" -H 127.0.0.1 -N eth0 -w 200,100 -c 300,200 -K -B"
$Echo
$Echo
$Echo 'Report bugs to: cloved@gmail.com'
$Echo 'Home page: <http://bbs.itnms.info/forum.php?mod=viewthread&tid=767&extra=page%3D1>'
$Echo 'Geting help: <http://bbs.itnms.info/forum.php?mod=forumdisplay&fid=10&page=1> or Email to: cloved@gmail.com'
}
print_version(){
$Echo $(cat $0 | head -n 7 | tail -n 1|sed 's/\# //')
}
print_err_msg(){
$Echo "Error."
print_full_help_msg
}
check_record_cnt(){
echo $2 | awk -F "$1" '{print NF}'
}
list_interface(){
$SNMPWALK -v $Version $Community $Host "IF-MIB::ifDescr" |sed 's/IF-MIB::ifDescr./Interface index /g' | sed 's/= STRING:/orresponding to /g'
#exit 3
}
get_interface_index(){
intNames="$1"
intIndex=""
intNameList=$(echo $intNames|sed 's/,/ /g')
for intName in $intNameList
do
intIndex="$intIndex "$($SNMPWALK -v $Version $Community $Host "IF-MIB::ifDescr" |awk -F 'STRING: ' '{if ($2 == "'$intName'")print $0}' | awk -F '=' '{print $1}' | sed 's/IF-MIB::ifDescr.//')
done
}
gen_string(){
string_num=$1
string_i=1
string_t=""
string_p="NA "
while [ $string_i -le $string_num ]
do
string_t="$string_t$string_p"
string_i=`expr $string_i + 1`
done
}
#adjust_value(){
# if [ `echo "$1 < 1" | bc` -eq 1 ]; then
# return "0"${$1} # if -lt 1, will error at: return: 0.1: numeric argument required
# else
# return $1
# fi
#}
to_debug(){
if [ "$Debug" = "true" ]; then
$Echo "$*" >> /tmp/check_traffic.log.$$ 2>&1
#$Echo "$*" >> /tmp/check_traffic.log 2>&1
if [ "$zDebug" = "true" ]; then
$Echo "$*"
fi
fi
}
case "$(uname -s)"
in
SunOS)
Echo="echo"
;;
Linux)
Echo="echo -e"
;;
*)
Echo="echo"
;;
esac
if [ $# -lt 1 ]; then
print_help_msg
exit 3
else
while getopts :vz6rhi:p:F:V:C:A:H:I:N:LKMBbw:c: OPTION
do
case $OPTION
in
v)
#$Echo "Verbose mode."
Debug=true
;;
z)
zDebug=true
;;
V)
Version=$OPTARG
if [ $Version == "3" ]; then
SnmpVersion=3
fi
;;
C)
Community=$OPTARG
;;
A)
AuthString=$OPTARG
;;
i)
Suffix="$OPTARG"
;;
F)
Format="$OPTARG"
;;
6)
Bit64="True"
;;
p)
Num="$OPTARG"
TrafficJitter="True"
;;
r)
UseRange="True"
;;
H)
Host=$OPTARG
;;
L)
ListInt="True"
;;
I)
Interface=$OPTARG
;;
N)
UseIntName="True"
InterfaceName=$OPTARG
;;
w)
WarningV=$OPTARG
;;
c)
CriticalV=$OPTARG
;;
M)
isM="True"
Unit_1="M"
;;
K)
;;
B)
isB="True"
Unit_2="B"
;;
b)
;;
h)
print_full_help_msg
exit 3
;;
?)
$Echo "Error: Illegal Option."
print_help_msg
exit 3
;;
esac
done
fi
SNMPWALK=`which snmpwalk 2>&1`
if [ $? -ne 0 ];then
$Echo $SNMPWALK
$Echo "Can not found command snmpwalk in you system PATH: $PATH, pleas check it"
exit 3
fi
SNMPWALK="$SNMPWALK -t $Timeout -Oa"
to_debug Use $SNMPWALK to check traffic
SNMPGET=`which snmpget 2>&1`
if [ $? -ne 0 ];then
$Echo $SNMPGET
$Echo "Can not found command snmpget in you system PATH: $PATH, pleas check it"
exit 3
fi
SNMPGET="$SNMPGET -t $Timeout -Oa"
to_debug Use $SNMPGET to check traffic
BC=`which bc 2>&1`
if [ $? -ne 0 ];then
$Echo $BC
$Echo "Can not found command bc in you system PATH: $PATH, pleas check it"
exit 3
fi
to_debug Use $BC to calculate
if [ ! -z "$Interface" -a ! -z "$InterfaceName" ] ; then
$Echo "Please Use -N or -I only"
print_help_msg
exit 3
fi
mmHostCnt=`check_record_cnt "," "$Host"`
mmCommunityCnt=`check_record_cnt "," "$Community"`
mmVersionCnt=`check_record_cnt "," "$Version"`
if [ "$UseIntName""ZZ" == "TrueZZ" ]; then
Interface="$InterfaceName"
fi
mmIntCnt=`check_record_cnt "," "$Interface"`
if [ $mmHostCnt -gt 1 ]; then
#MM
if [ $mmHostCnt -lt 1 -o$mmCommunityCnt -lt 1 -o $mmVersionCnt -lt 1 -o $mmIntCnt -lt 1 ]; then
$Echo "Args Error."
print_full_help_msg
exit 3
fi
if [ $mmHostCnt -ne $mmCommunityCnt -o $mmCommunityCnt -ne $mmVersionCnt -o$mmVersionCnt -ne $mmIntCnt ]; then
$Echo "Args Error."
print_full_help_msg
exit 3
fi
mmHostList=$(echo $Host|sed 's/,/ /g')
mmCommunityList=$(echo $Community|sed 's/,/ /g')
mmVersionList=$(echo $Version|sed 's/,/ /g')
mmIntList=$(echo $Interface|sed 's/,/ /g')
mmIntNameList=$(echo $InterfaceName|sed 's/,/ /g')
mmHostArray=($mmHostList)
mmCommunityArray=($mmCommunityList)
mmVersionArray=($mmVersionList)
mmIntArray=($mmIntList)
mmIntNameArray=($mmIntNameList)
##MMArray Data Struct
#MMArray(Host Community Version Interface InterfaceName)
# 0 1 2 3 4
#MMArray[...]
##
declare -a MMArray
Columns=5
Rows=$mmHostCnt
#init ctbspIn/ctbspOut
ctbpsIn=0
ctbpsOut=0
#init ctDiffRIAVG/ctDiffROAVG
ctDiffRIAVG=0
ctDiffROAVG=0
for mmII in `seq 1 $mmHostCnt`
do
let "aIndex = $mmII - 1"
let "mmIndex = $aIndex * $Columns + 0"
MMArray[$mmIndex]=${mmHostArray[$aIndex]}
Host=${MMArray[$mmIndex]}
to_debug MMArray host"${MMArray[$mmIndex]}"
let "mmIndex = $aIndex * $Columns + 1"
MMArray[$mmIndex]=${mmCommunityArray[$aIndex]}
Community=${MMArray[$mmIndex]}
to_debug MMArray community "${MMArray[$mmIndex]}"
let "mmIndex = $aIndex * $Columns + 2"
MMArray[$mmIndex]=${mmVersionArray[$aIndex]}
Version=${MMArray[$mmIndex]}
to_debug MMArray version "${MMArray[$mmIndex]}"
let "mmIndex = $aIndex * $Columns + 3"
MMArray[$mmIndex]=${mmIntArray[$aIndex]}
Interface=${MMArray[$mmIndex]}
to_debug MMArray int "${MMArray[$mmIndex]}"
let "mmIndex = $aIndex * $Columns + 4"
MMArray[$mmIndex]=${mmIntNameArray[$aIndex]}
InterfaceName=${MMArray[$mmIndex]}
to_debug MMArray int "${MMArray[$mmIndex]}"
if [ -z "$Version" -o -z "$Host" ] ; then
$Echo "Args Error."
print_full_help_msg
exit 3
fi
if [ "$SnmpVersion" = "3" ]; then
if [ -z "$AuthString" ]; then
$Echo "Args Error."
print_full_help_msg
exit 3
else
Community="$AuthString"
fi
else
if [ -z "$Community" ]; then
$Echo "Args Error."
print_full_help_msg
exit 3
else
Community=" -c $Community"
fi
fi
if [ "$UseIntName""ZZ" == "TrueZZ" ]; then
get_interface_index $InterfaceName
Interface=$intIndex
if [ -z "$Interface"-o "$Interface" == " " ] ; then
$Echo Can not get the interface index with "$InterfaceName" at "$Host".
exit 3
fi
Interface=$(echo $Interface|sed 's/ /,/g')
fi
if [ "$ListInt" = "True" ]; then
$Echo "List Interface for host $Host."
list_interface
exit 3
fi
if [ -z "$Interface" -o -z "$WarningV" -o -z "$CriticalV" ] ; then
$Echo "Args Error."
print_full_help_msg
exit 3
fi
to_debug All Valuesare \" Warning: "$WarningV" and Critical: "$CriticalV" \".
WVC=`check_record_cnt "," "$WarningV"`
CVC=`check_record_cnt "," "$CriticalV"`
to_debug WVC is $WVC and CVC is $CVC
if [ $UseRange = "True" ] ;then
to_debug UseRange is True
#####################
if [ $WVC -ne 2 -o $CVC -ne 2 ] ; then
$Echo "Warning and Critical Value error."
print_full_help_msg
exit 3
else
W1=`echo $WarningV| awk -F "," '{print $1}'`
W1b=`echo $W1| awk -F "-" '{print $1}'`
W1e=`echo $W1| awk -F "-" '{print $2}'`
W2=`echo $WarningV| awk -F "," '{print $2}'`
W2b=`echo $W2| awk -F "-" '{print $1}'`
W2e=`echo $W2| awk -F "-" '{print $2}'`
Wtb=`echo "$W1b + $W2b"|bc`
Wte=`echo "$W1e + $W2e"|bc`
to_debug Warning Value is $W1 $W2 $Wtb $Wte
C1=`echo $CriticalV| awk -F "," '{print $1}'`
C1b=`echo $C1| awk -F "-" '{print $1}'`
C1e=`echo $C1| awk -F "-" '{print $2}'`
C2=`echo $CriticalV| awk -F "," '{print $2}'`
C2b=`echo $C2| awk -F "-" '{print $1}'`
C2e=`echo $C2| awk -F "-" '{print $2}'`
Ctb=`echo "$C1b + $C2b"|bc`
Cte=`echo "$C1e + $C2e"|bc`
to_debug Critical Value is $C1 $C2 $Ctb $Cte
check_1b=`echo "$C1b < $W1b" | bc`
check_1e=`echo "$C1e > $W1e" | bc`
check_2b=`echo "$C2b < $W2b" | bc`
check_2e=`echo "$C2e > $W2e" | bc`
to_debug check_1 is $check_1b , $check_1e check_2 is $check_2b $check_2e
if [ $check_1b -ne 1 -o $check_1e -ne 1 -o$check_2b -ne 1 -o$check_2e -ne 1 ] ; then
$Echo "Error, the corresponding Critical End value must greater than Warning End value, And Critical Begin value must less than Warning End value"
print_full_help_msg
exit 3
fi
fi
#####################
else
to_debug Use Range is False
if [ $WVC -ne 2 -o $CVC -ne 2 ] ; then
$Echo "Warning and Critical Value error."
print_full_help_msg
exit 3
else
W1=`echo $WarningV| awk -F "," '{print $1}'`
W2=`echo $WarningV| awk -F "," '{print $2}'`
Wt=`echo "$W1 + $W2"|bc`
to_debug Warning Value is $W1 $W2 $Wt
C1=`echo $CriticalV| awk -F "," '{print $1}'`
C2=`echo $CriticalV| awk -F "," '{print $2}'`
Ct=`echo "$C1 + $C2"|bc`
to_debug Critical Value is $C1 $C2 $Ct
check_1=`echo "$C1 > $W1" | bc`
check_2=`echo "$C2 > $W2" | bc`
to_debug check_1 is $check_1 , check_2 is $check_2
if [ $check_1 -ne 1 -o$check_2 -ne 1 ] ; then
$Echo "Error, the corresponding Critical value must greater than Warning value."
print_full_help_msg
exit 3
fi
fi
fi
if [ -z $Suffix ]; then
Suffix=itnms
fi
if [ $TrafficJitter"AA" = "TrueAA" ]; then
Suffix=${Suffix}J
fi
if [ $UseRange = "True" ] ;then
Suffix=${Suffix}R
fi
Username=`id --user --name`
# This file will save the traffic data from previos check.
# Make sure it will never be deleted.
CF_HIST_DATA="/var/tmp/check_traffic_${Host}_${Interface}_MM_${Username}_${Suffix}.hist_dat"
to_debug CF_HIST_DATA "$CF_HIST_DATA"
Time=`date +%s`
ifName="`$SNMPGET -v $Version$Community $Host IF-MIB::ifDescr.${Interface}| awk -F ":" '{print $4}'`"
ifSpeed="`$SNMPGET -v $Version $Community $Host IF-MIB::ifSpeed.${Interface}| awk -F ":" '{print $4}'`"
Flag64Content=`$SNMPGET -v $Version $Community $Host IF-MIB::ifHCOutOctets.${Interface}2>&1`
if [ $? -eq 0 ]; then
echo $Flag64Content |grep Counter64 >/dev/null 2>&1
Flag64=$?
if [ $Flag64 -eq 0-a "$Version" = "2c" ];then
ifIn=$ifIn64
ifOut=$ifOut64
BitSuffix=64
fi
else
ifIn=$ifIn32
ifOut=$ifOut32
BitSuffix=32
if [ "$Bit64" = "True" ] ;then
$Echo "Maybe your Host(device) not support 64 bit counter. Please confirm your ARGS and re-check it with Verbose mode, then to check the log.(If you snmp not support 64 bit counter, do not use -6 option)"
exit 3
fi
fi
#set CF_HIST_DATA File Name
CF_HIST_DATA=${CF_HIST_DATA}_${BitSuffix}
#set STAT_HIST_DATA File Name
STAT_HIST_DATA=${CF_HIST_DATA}_ctj_$Num
if [ ! -f $CF_HIST_DATA ]; then
IsFirst="True"
touch $CF_HIST_DATA
if [ $? -ne 0 ];then
Severity=3
Msg="Unknown"
OutPut="Create File $CF_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
fi
if [ ! -r$CF_HIST_DATA -o ! -w$CF_HIST_DATA ]; then
Severity=3
Msg="Unknown"
OutPut="Read or Write File $CF_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
if [ $TrafficJitter"AA" = "TrueAA" ]; then
if [ ! -f $STAT_HIST_DATA ]; then
touch $STAT_HIST_DATA
IsStatFirst="True"
if [ $? -ne 0 ];then
Severity=3
Msg="Unknown"
OutPut="Create File $STAT_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
if [ ! -r$STAT_HIST_DATA -o ! -w$STAT_HIST_DATA ]; then
Severity=3
Msg="Unknown"
OutPut="Read or Write File $STAT_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
gen_string $Num
to_debug string_t $string_t
TC=0
TRI=($string_t)
TRO=($string_t)
echo $TC >$STAT_HIST_DATA
echo ${TRI[@]} >>$STAT_HIST_DATA
echo ${TRO[@]} >>$STAT_HIST_DATA
fi
C=(`head -n 1 $STAT_HIST_DATA`)
RI=(`head -n 2 $STAT_HIST_DATA|tail -n 1 `)
RO=(`tail -n 1 $STAT_HIST_DATA`)
to_debug C RI RO $C $RI $RO
to_debug C RI RO $C ${RI[@]} ${RO[@]}
to_debug C N $C $Num
fi
_result_status=`$SNMPGET -v $Version $Community $Host "IF-MIB::ifOperStatus.${Interface}"| awk '{print $4}' | awk -F '(' '{print $1}'`
if [ "$_result_status" != "up" ]; then
$Echo "The Interface name:${ifName} -- index:${Interface} you checked seems not up."
exit 3
fi
_result_in=`$SNMPGET -v $Version $Community $Host "IF-MIB::${ifIn}"."$Interface"`
_result_out=`$SNMPGET -v $Version $Community $Host "IF-MIB::${ifOut}"."$Interface" `
to_debug time is $Time, $SNMPGET check result in is $_result_in, out is $_result_out
_result_in=`echo $_result_in |awk '{print $4}'`
_result_out=`echo $_result_out|awk '{print $4}'`
to_debug time is $Time, $SNMPGET check result in is $_result_in, out is $_result_out
if [ -z "$_result_in" -o -z "$_result_out" ] ; then
$Echo "No Data been get here. Please confirm your ARGS and re-check it with Verbose mode, then to check the log.(If you snmp not support 64 bit counter, do not use -6 option)"
exit 3
fi
In=`echo "$_result_in * 8 " |bc`
Out=`echo "$_result_out * 8 " |bc`
to_debug Index is $index Time is $Time, In is $In, Out is $Out
HistData=`cat $CF_HIST_DATA| head -n 1`
HistTime=`echo $HistData| awk -F "|" '{print $1}'|sed 's/ //g'`
HistIn=`echo $HistData| awk -F "|" '{print $2}'|sed 's/ //g'`
HistOut=`echo $HistData| awk -F "|" '{print $3}'|sed 's/ //g'`
to_debug HistData is $HistData HistTime is $HistTime, HistIn is $HistIn, HistOut is $HistOut
if [ -z "$HistTime" -o -z "$HistIn" -o -z "$HistOut" ] ; then
if [ "$IsFirst" = "True" ]; then
#If there is a empty hist file, can write the data before exit(for the reason of IsFirst),
#the data can be used for next time.
echo "$Time|$In|$Out" > $CF_HIST_DATA
to_debug "$Time|$In|$Out"$CF_HIST_DATA
continue
else
Severity="3"
Msg="Unknown"
OutPut="Can not found data in the history data file. \
Please to check the file $CF_HIST_DATA, or use use verbose mode and check the debug file"
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
else
Interval=`echo "$Time - $HistTime" | bc`
if [ $Interval -lt $Min_Interval ] ; then
$Echo "The check interval must greater than $Min_Interval Seconds. But now it is $Interval. Please retry it later."
exit 3
fi
#echo DEBUG here: data of $Host $Interface $ifName "$Time|$In|$Out"
to_debug DEBUG here: data of $Host $Interface $ifName "$Time|$In|$Out"
echo "$Time|$In|$Out" > $CF_HIST_DATA
if [ $? -ne 0 ];then
Severity=3
Msg="Unknown"
OutPut="Write File $CF_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
if [ $Interval -gt $Max_Interval ] ; then
$Echo "The check interval is too large(It is greater than $Max_Interval). The result is droped. We will use the fresh data at the next time."
exit 3
fi
fi
DiffIn=`echo "$In - $HistIn" | bc`
DiffOut=`echo "$Out - $HistOut" | bc`
to_debug Interval/DiffIn/DiffOut $Interval $DiffIn $DiffOut
if [ ` echo " $Interval > 0 " |bc ` -eq 0 ] ; then
$Echo"we got a negative time interval value here."
exit 3
fi
if [ ` echo " $DiffOut >= 0 " |bc ` -eq 0 -o` echo " $DiffIn >= 0 " |bc ` -eq 0 ] ; then
$Echo"Maybe 32 bit counter overflow, because we got a negative value here."
exit 3
fi
bpsIn=`echo "$DiffIn / $Interval" | bc`
bpsOut=`echo "$DiffOut / $Interval" | bc`
to_debug bpsIn/bpsOut $bpsIn $bpsOut
#Comment to fix the bug when high traffic occurs , or in some virtual environment.
#if [ $bpsIn -gt $ifSpeed -o $bpsOut -gt $ifSpeed ]; then
# $Echo"OOPS. We get a value bigger than ifSpeed here. Something is wrong. Maybe a check from 32bit to 64bit transfer, or any other error here."
# exit 3
#fi
if [ $TrafficJitter"AA" = "TrueAA" ]; then
if [ $C -lt $Num ]; then
to_debug we have not the enough data to calculating.
RI[$C]=$bpsIn
RO[$C]=$bpsOut
to_debug C $C
C=`expr $C + 1`
echo $C >$STAT_HIST_DATA
echo ${RI[@]} >>$STAT_HIST_DATA
echo ${RO[@]} >>$STAT_HIST_DATA
isNotEnough=True
continue
else
to_debug we have the enough data to calculating.
RIAVG=0
ROAVG=0
lenRI=${#RI[@]}
to_debug lenRI is $lenRI
rii=0
while [ $rii -lt $lenRI ]
do
to_debug hist: rii $rii
to_debug hist: rii RI $rii ${RI[$rii]}
to_debug hist: rii RO $rii ${RO[$rii]}
RIAVG=`echo "scale=$Scale; $RIAVG + ${RI[$rii]} " |bc`
ROAVG=`echo "scale=$Scale; $ROAVG + ${RO[$rii]} " |bc`
let rii++
to_debug RIAVG $RIAVG
to_debug ROAVG $ROAVG
done
to_debug RIAVG $RIAVG
to_debug ROAVG $ROAVG
RIAVG=`echo "scale=$Scale; $RIAVG / $Num " |bc`
ROAVG=`echo "scale=$Scale; $ROAVG / $Num " |bc`
to_debug RIAVG $RIAVG
to_debug ROAVG $ROAVG
rii=0
while [ $rii -lt `expr $lenRI - 1` ]
do
RI[$rii]=${RI[`expr $rii + 1`]}
RO[$rii]=${RO[`expr $rii + 1`]}
to_debug new: rii RI $rii ${RI[`expr $rii + 1 `]}
to_debug new: rii RO $rii ${RO[`expr $rii + 1 `]}
let rii++
done
RI[$rii]=$bpsIn
RO[$rii]=$bpsOut
echo $C >$STAT_HIST_DATA
echo ${RI[@]} >>$STAT_HIST_DATA
echo ${RO[@]} >>$STAT_HIST_DATA
DiffRIAVG=`echo "scale=$Scale; $bpsIn - $RIAVG" |bc`
DiffROAVG=`echo "scale=$Scale; $bpsOut - $ROAVG" |bc`
to_debug DiffRIAVG $DiffRIAVG
to_debug DiffROAVG $DiffROAVG
DiffRIAVG=`echo $DiffRIAVG | sed 's/-//'`
DiffROAVG=`echo $DiffROAVG | sed 's/-//'`
to_debug DiffRIAVG $DiffRIAVG
to_debug DiffROAVG $DiffROAVG
DiffRIAVG=`echo "scale=$Scale; $DiffRIAVG / $RIAVG * 100 " |bc`
DiffROAVG=`echo "scale=$Scale; $DiffROAVG / $ROAVG* 100" |bc`
DiffAVGTotal=`echo "scale=$Scale; $DiffRIAVG+ $DiffROAVG" |bc`
to_debug DiffRIAVG $DiffRIAVG
to_debug DiffROAVG $DiffROAVG
to_debug DiffAVGTotal $DiffAVGTotal
fi
ctDiffRIAVG=`echo "scale=$Scale; $ctDiffRIAVG + $DiffRIAVG" |bc`
ctDiffROAVG=`echo "scale=$Scale; $ctDiffROAVG + $DiffROAVG" |bc`
to_debug ctDiffRIAVG $ctDiffRIAVG
to_debug ctDiffROAVG $ctDiffROAVG
else
#aggreating data
ctbpsIn=`echo $ctbpsIn + $bpsIn|bc`
ctbpsOut=`echo $ctbpsOut + $bpsOut|bc`
fi
done
if [ "$isNotEnough" = "True" ]; then
$Echo "OK - There was only `echo $C -1 |bc` hist data before this check. We need the $Num hist data to use for calculating. Please wait."
exit 0
fi
if [ "$IsFirst" = "True" ]; then
Severity="0"
Msg="OK"
OutPut="It is the first time of this plugins to run, or some data file lost. We will get the data from the next time."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
DiffRIAVG=`echo "scale=$Scale; $ctDiffRIAVG / $mmIntCnt" |bc`
DiffROAVG=`echo "scale=$Scale; $ctDiffROAVG / $mmIntCnt" |bc`
DiffAVGTotal=`echo "scale=$Scale; $DiffRIAVG+ $DiffROAVG" |bc`
to_debug DRIA $DiffRIAVG DROA $DiffROAVG DAVGT $DiffAVGTotal
#End of MM
else
#SM or SS
if [ -z "$Version" -o -z "$Host" ] ; then
$Echo "Args Error."
print_full_help_msg
exit 3
fi
if [ "$SnmpVersion" = "3" ]; then
if [ -z "$AuthString" ]; then
$Echo "Args Error."
print_full_help_msg
exit 3
else
Community="$AuthString"
fi
else
if [ -z "$Community" ]; then
$Echo "Args Error."
print_full_help_msg
exit 3
else
Community=" -c $Community"
fi
fi
if [ "$UseIntName""ZZ" == "TrueZZ" ]; then
get_interface_index $InterfaceName
Interface=$intIndex
if [ -z "$Interface"-o "$Interface" == " " ] ; then
$Echo Can not get the interface index with "$InterfaceName" at "$Host".
exit 3
fi
Interface=$(echo $Interface|sed 's/ /,/g')
fi
if [ "$ListInt" = "True" ]; then
$Echo "List Interface for host $Host."
list_interface
exit 3
fi
if [ -z "$Interface" -o -z "$WarningV" -o -z "$CriticalV" ] ; then
$Echo "Args Error."
print_full_help_msg
exit 3
fi
to_debug All Valuesare \" Warning: "$WarningV" and Critical: "$CriticalV" \".
WVC=`check_record_cnt "," "$WarningV"`
CVC=`check_record_cnt "," "$CriticalV"`
to_debug WVC is $WVC and CVC is $CVC
if [ $UseRange = "True" ] ;then
to_debug UseRange is True
#####################
if [ $WVC -ne 2 -o $CVC -ne 2 ] ; then
$Echo "Warning and Critical Value error."
print_full_help_msg
exit 3
else
W1=`echo $WarningV| awk -F "," '{print $1}'`
W1b=`echo $W1| awk -F "-" '{print $1}'`
W1e=`echo $W1| awk -F "-" '{print $2}'`
W2=`echo $WarningV| awk -F "," '{print $2}'`
W2b=`echo $W2| awk -F "-" '{print $1}'`
W2e=`echo $W2| awk -F "-" '{print $2}'`
Wtb=`echo "$W1b + $W2b"|bc`
Wte=`echo "$W1e + $W2e"|bc`
to_debug Warning Value is $W1 $W2 $Wtb $Wte
C1=`echo $CriticalV| awk -F "," '{print $1}'`
C1b=`echo $C1| awk -F "-" '{print $1}'`
C1e=`echo $C1| awk -F "-" '{print $2}'`
C2=`echo $CriticalV| awk -F "," '{print $2}'`
C2b=`echo $C2| awk -F "-" '{print $1}'`
C2e=`echo $C2| awk -F "-" '{print $2}'`
Ctb=`echo "$C1b + $C2b"|bc`
Cte=`echo "$C1e + $C2e"|bc`
to_debug Critical Value is $C1 $C2 $Ctb $Cte
check_1b=`echo "$C1b < $W1b" | bc`
check_1e=`echo "$C1e > $W1e" | bc`
check_2b=`echo "$C2b < $W2b" | bc`
check_2e=`echo "$C2e > $W2e" | bc`
to_debug check_1 is $check_1b , $check_1e check_2 is $check_2b $check_2e
if [ $check_1b -ne 1 -o $check_1e -ne 1 -o$check_2b -ne 1 -o$check_2e -ne 1 ] ; then
$Echo "Error, the corresponding Critical End value must greater than Warning End value, And Critical Begin value must less than Warning End value"
print_full_help_msg
exit 3
fi
fi
#####################
else
to_debug Use Range is False
if [ $WVC -ne 2 -o $CVC -ne 2 ] ; then
$Echo "Warning and Critical Value error."
print_full_help_msg
exit 3
else
W1=`echo $WarningV| awk -F "," '{print $1}'`
W2=`echo $WarningV| awk -F "," '{print $2}'`
Wt=`echo "$W1 + $W2"|bc`
to_debug Warning Value is $W1 $W2 $Wt
C1=`echo $CriticalV| awk -F "," '{print $1}'`
C2=`echo $CriticalV| awk -F "," '{print $2}'`
Ct=`echo "$C1 + $C2"|bc`
to_debug Critical Value is $C1 $C2 $Ct
check_1=`echo "$C1 > $W1" | bc`
check_2=`echo "$C2 > $W2" | bc`
to_debug check_1 is $check_1 , check_2 is $check_2
if [ $check_1 -ne 1 -o$check_2 -ne 1 ] ; then
$Echo "Error, the corresponding Critical value must greater than Warning value."
print_full_help_msg
exit 3
fi
fi
fi
if [ -z $Suffix ]; then
Suffix=itnms
fi
if [ $TrafficJitter"AA" = "TrueAA" ]; then
Suffix=${Suffix}J
fi
if [ $UseRange = "True" ] ;then
Suffix=${Suffix}R
fi
# This file will save the traffic data from previos check.
# Make sure it will never be deleted.
IntCnt=`check_record_cnt "," "$Interface"`
to_debug Interface count$IntCnt
if [ $IntCnt -gt 1 ];then
isSMInt="True"
fi
to_debug isSMInt is $isSMInt
##SMArray Data Struct
#SMArray(ifIndex CF_HIST_DATA ifName ifSpeed STAT_HIST_DATA Time In Out Htime HIn HOut Interval DiffIn DiffOut bpsIn bpsOut NumC RIRO)
# 0 1 2 3 4 5 67 8 9 10 11 12 13 14 15 16171819
#SMArray[...]
##
declare -a SMArray
Columns=24
Rows=$IntCnt
Interface=`echo $Interface|sed 's/,/ /g'`
SMInterfaces=($Interface)
for ii in `seq 1 $IntCnt`
do
let "rIndex = $ii - 1"
let "index = $rIndex * $Columns + 0"
SMArray[$index]=${SMInterfaces[$rIndex]}
to_debug SMArray ifIndex"${SMArray[$index]}"
if [ "$isSMInt" = "True" ];then
CF_HIST_DATA="/var/tmp/check_traffic_${Host}_${SMArray[$index]}_SM_${Username}_${Suffix}.hist_dat"
else
CF_HIST_DATA="/var/tmp/check_traffic_${Host}_${SMArray[$index]}_${Username}_${Suffix}.hist_dat"
fi
to_debug CF_HIST_DATA "$CF_HIST_DATA"
let "index = $rIndex * $Columns + 1"
SMArray[$index]=$CF_HIST_DATA
to_debug SMArray CF_HIST_DATA "${SMArray[$index]}"
done
to_debug SMArray[@] ${SMArray[@]}
Time=`date +%s`
for ii in `seq 1 $IntCnt`
do
let "rIndex = $ii - 1"
let "index = $rIndex * $Columns + 0"
ifName="`$SNMPGET -v $Version$Community $Host IF-MIB::ifDescr.${SMArray[$index]}| awk -F ":" '{print $4}'`"
ifSpeed="`$SNMPGET -v $Version $Community $Host IF-MIB::ifSpeed.${SMArray[$index]}| awk -F ":" '{print $4}'`"
to_debug ifIndex ${SMArray[$index]}
Flag64ContentSM=`$SNMPGET -v $Version $Community $Host IF-MIB::ifHCOutOctets.${SMArray[$index]} 2>&1`
if [ $? -eq 0 ]; then
echo $Flag64ContentSM |grep Counter64 >/dev/null 2>&1
Flag64=$?
if [ $Flag64 -eq 0-a "$Version" = "2c" ];then
ifIn=$ifIn64
ifOut=$ifOut64
BitSuffix=64
fi
else
ifIn=$ifIn32
ifOut=$ifOut32
BitSuffix=32
if [ "$Bit64" = "True" ] ;then
$Echo "Maybe your Host(device) not support 64 bit counter. Please confirm your ARGS and re-check it with Verbose mode, then to check the log.(If you snmp not support 64 bit counter, do not use -6 option)"
exit 3
fi
fi
let "index = $rIndex * $Columns + 1"
to_debug CF_HIST_DATA ${SMArray[$index]}
let "index = $rIndex * $Columns + 2"
SMArray[$index]=${ifName}
to_debug ifName ${SMArray[$index]}
let "index = $rIndex * $Columns + 3"
SMArray[$index]=${ifSpeed}
to_debug ifSpeed ${SMArray[$index]}
done
to_debugSMArray[@] ${SMArray[@]}
for ii in `seq 1 $IntCnt`
do
let "rIndex = $ii - 1"
let "index = $rIndex * $Columns + 1"
#set CF_HIST_DATA File Name
CF_HIST_DATA=${SMArray[$index]}_${BitSuffix}
SMArray[$index]=$CF_HIST_DATA
to_debug CF_HIST_DATA ${SMArray[$index]}
#set STAT_HIST_DATA File Name
let "index = $rIndex * $Columns + 4"
STAT_HIST_DATA=${CF_HIST_DATA}_ctj_$Num
SMArray[$index]=$STAT_HIST_DATA
to_debug STAT_HIST_DATA ${SMArray[$index]}
done
for ii in `seq 1 $IntCnt`
do
let "rIndex = $ii - 1"
let "index = $rIndex * $Columns + 1"
CF_HIST_DATA=${SMArray[$index]}
to_debug CF_HIST_DATA ${SMArray[$index]}
if [ ! -f $CF_HIST_DATA ]; then
IsFirst="True"
touch $CF_HIST_DATA
if [ $? -ne 0 ];then
Severity=3
Msg="Unknown"
OutPut="Create File $CF_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
fi
if [ ! -r$CF_HIST_DATA -o ! -w$CF_HIST_DATA ]; then
Severity=3
Msg="Unknown"
OutPut="Read or Write File $CF_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
done
if [ $TrafficJitter"AA" = "TrueAA" ]; then
for ii in `seq 1 $IntCnt`
do
let "rIndex = $ii - 1"
let "index = $rIndex * $Columns + 4"
STAT_HIST_DATA=${SMArray[$index]}
to_debug STAT_HIST_DATA ${SMArray[$index]}
if [ ! -f $STAT_HIST_DATA ]; then
touch $STAT_HIST_DATA
IsStatFirst="True"
if [ $? -ne 0 ];then
Severity=3
Msg="Unknown"
OutPut="Create File $STAT_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
if [ ! -r$STAT_HIST_DATA -o ! -w$STAT_HIST_DATA ]; then
Severity=3
Msg="Unknown"
OutPut="Read or Write File $STAT_HIST_DATA Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
gen_string $Num
to_debug string_t $string_t
TC=0
TRI=($string_t)
TRO=($string_t)
echo $TC >$STAT_HIST_DATA
echo ${TRI[@]} >>$STAT_HIST_DATA
echo ${TRO[@]} >>$STAT_HIST_DATA
fi
C=(`head -n 1 $STAT_HIST_DATA`)
RI=(`head -n 2 $STAT_HIST_DATA|tail -n 1 `)
RO=(`tail -n 1 $STAT_HIST_DATA`)
to_debug C RI RO $C $RI $RO
to_debug C RI RO $C ${RI[@]} ${RO[@]}
to_debug C N $C $Num
let "index = $rIndex * $Columns + 16"
SMArray[$index]=${Num}
to_debug Num ${SMArray[$index]}
let "index = $rIndex * $Columns + 17"
SMArray[$index]=${C}
to_debug C ${SMArray[$index]}
let "index = $rIndex * $Columns + 18"
SMArray[$index]=${RI[@]}
to_debug RI ${SMArray[$index]}
let "index = $rIndex * $Columns + 19"
SMArray[$index]=${RO[@]}
to_debug RO ${SMArray[$index]}
done
fi
for ii in `seq 1 $IntCnt`
do
let "rIndex = $ii - 1"
let "index = $rIndex * $Columns + 0"
curIfIdx=${SMArray[$index]}
to_debug curIfIdx $curIfIdx
let "index = $rIndex * $Columns + 2"
curIfName=${SMArray[$index]}
to_debug curIfName $curIfName
_result_status=`$SNMPGET -v $Version $Community $Host "IF-MIB::ifOperStatus.${curIfIdx}"| awk '{print $4}' | awk -F '(' '{print $1}'`
if [ "$_result_status" != "up" ]; then
$Echo "The Interface name:${curIfName} -- index:${curIfIdx} you checked seems not up."
exit 3
fi
done
#init ctbspIn/ctbspOut
ctbpsIn=0
ctbpsOut=0
#init ctDiffRIAVG/ctDiffROAVG
ctDiffRIAVG=0
ctDiffROAVG=0
for ii in `seq 1 $IntCnt`
do
let "rIndex = $ii - 1"
let "index = $rIndex * $Columns + 0"
curIfIdx=${SMArray[$index]}
to_debug curIfIdx $curIfIdx
_result_in=`$SNMPGET -v $Version $Community $Host "IF-MIB::${ifIn}"."$curIfIdx"`
_result_out=`$SNMPGET -v $Version $Community $Host "IF-MIB::${ifOut}"."$curIfIdx" `
to_debug time is $Time, $SNMPGET check result in is $_result_in, out is $_result_out
_result_in=`echo $_result_in |awk '{print $4}'`
_result_out=`echo $_result_out|awk '{print $4}'`
to_debug time is $Time, $SNMPGET check result in is $_result_in, out is $_result_out
if [ -z "$_result_in" -o -z "$_result_out" ] ; then
$Echo "No Data been get here. Please confirm your ARGS and re-check it with Verbose mode, then to check the log.(If you snmp not support 64 bit counter, do not use -6 option)"
exit 3
fi
In=`echo "$_result_in * 8 " |bc`
Out=`echo "$_result_out * 8 " |bc`
to_debug Index is $index Time is $Time, In is $In, Out is $Out
let "index = $rIndex * $Columns + 5"
SMArray[$index]=$Time
to_debug time is ${SMArray[$index]}
let "index = $rIndex * $Columns + 6"
SMArray[$index]=$In
to_debug In is ${SMArray[$index]}
let "index = $rIndex * $Columns + 7"
SMArray[$index]=$Out
to_debug Out is ${SMArray[$index]}
let "index = $rIndex * $Columns + 1"
curCHD=${SMArray[$index]}
to_debug curCHD $curCHD
HistData=`cat $curCHD| head -n 1`
HistTime=`echo $HistData| awk -F "|" '{print $1}'|sed 's/ //g'`
HistIn=`echo $HistData| awk -F "|" '{print $2}'|sed 's/ //g'`
HistOut=`echo $HistData| awk -F "|" '{print $3}'|sed 's/ //g'`
to_debug HistData is $HistData HistTime is $HistTime, HistIn is $HistIn, HistOut is $HistOut
if [ -z "$HistTime" -o -z "$HistIn" -o -z "$HistOut" ] ; then
if [ "$IsFirst" = "True" ]; then
#If there is a empty hist file, can write the data before exit(for the reason of IsFirst),
#the data can be used for next time.
echo "$Time|$In|$Out" > $curCHD
to_debug "$Time|$In|$Out"$curCHD
continue
else
Severity="3"
Msg="Unknown"
OutPut="Can not found data in the history data file. \
Please to check the file $curCHD, or use use verbose mode and check the debug file"
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
else
let "index = $rIndex * $Columns + 8"
SMArray[$index]=$HistTime
to_debug HistTime is ${SMArray[$index]}
let "index = $rIndex * $Columns + 9"
SMArray[$index]=$HistIn
to_debug HistIn is ${SMArray[$index]}
let "index = $rIndex * $Columns + 10"
SMArray[$index]=$HistOut
to_debug HistOut is ${SMArray[$index]}
Interval=`echo "$Time - $HistTime" | bc`
if [ $Interval -lt $Min_Interval ] ; then
$Echo "The check interval must greater than $Min_Interval Seconds. But now it s $Interval. Please retry it later."
exit 3
fi
#echo DEBUG here: data of $Host $Interface $ifName "$Time|$In|$Out"
to_debug DEBUG here: data of $Host $Interface $ifName "$Time|$In|$Out"
echo "$Time|$In|$Out" > $curCHD
if [ $? -ne 0 ];then
Severity=3
Msg="Unknown"
OutPut="Write File $curCHD Error with user `id`."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
if [ $Interval -gt $Max_Interval ] ; then
$Echo "The check interval is too large(It is greater than $Max_Interval). The result is droped. We will use the fresh data at the next time."
exit 3
fi
fi
DiffIn=`echo "$In - $HistIn" | bc`
DiffOut=`echo "$Out - $HistOut" | bc`
to_debug Interval/DiffIn/DiffOut $Interval $DiffIn $DiffOut
if [ ` echo " $Interval > 0 " |bc ` -eq 0 ] ; then
$Echo"we got a negative time interval value here."
exit 3
fi
if [ ` echo " $DiffOut >= 0 " |bc ` -eq 0 -o` echo " $DiffIn >= 0 " |bc ` -eq 0 ] ; then
$Echo"Maybe 32 bit counter overflow, because we got a negative value here."
exit 3
fi
bpsIn=`echo "$DiffIn / $Interval" | bc`
bpsOut=`echo "$DiffOut / $Interval" | bc`
to_debug bpsIn/bpsOut $bpsIn $bpsOut
#Comment to fix the bug when high traffic occurs , or in some virtual environment.
#if [ $bpsIn -gt $ifSpeed -o $bpsOut -gt $ifSpeed ]; then
# $Echo"OOPS. We get a value bigger than ifSpeed here. Something is wrong. Maybe a check from 32bit to 64bit transfer, or any other error here."
# exit 3
#fi
let "index = $rIndex * $Columns + 11"
SMArray[$index]=$Interval
to_debug Interval is ${SMArray[$index]}
let "index = $rIndex * $Columns + 12"
SMArray[$index]=$DiffIn
to_debug DiffIn is ${SMArray[$index]}
let "index = $rIndex * $Columns + 13"
SMArray[$index]=$DiffOut
to_debug DiffOut is ${SMArray[$index]}
let "index = $rIndex * $Columns + 14"
SMArray[$index]=$bpsIn
to_debug bpsIn is ${SMArray[$index]}
let "index = $rIndex * $Columns + 15"
SMArray[$index]=$bpsOut
to_debug bpsOut is ${SMArray[$index]}
if [ $TrafficJitter"AA" = "TrueAA" ]; then
let "index = $rIndex * $Columns + 4"
curSHD=${SMArray[$index]}
to_debug curSHD $curSHD
let "index = $rIndex * $Columns + 16"
curNum=${SMArray[$index]}
to_debug curNum $curNum
let "index = $rIndex * $Columns + 17"
curC=${SMArray[$index]}
to_debug curC $curC
let "index = $rIndex * $Columns + 18"
curRI=${SMArray[$index]}
to_debug curRI $curRI
let "index = $rIndex * $Columns + 19"
curRO=${SMArray[$index]}
to_debug curRO $curRO
curRI=($curRI)
curRO=($curRO)
if [ $curC -lt $curNum ]; then
to_debug we have not the enough data to calculating.
curRI[$curC]=$bpsIn
curRO[$curC]=$bpsOut
to_debug curC $curC
to_debug curRI ${curRI[@]}
to_debug curRO ${curRO[@]}
curC=`expr $curC + 1`
echo $curC >$curSHD
echo ${curRI[@]} >>$curSHD
echo ${curRO[@]} >>$curSHD
isNotEnough=True
continue
else
to_debug we have the enough data to calculating.
RIAVG=0
ROAVG=0
lencurRI=${#curRI[@]}
to_debug lencurRI is $lencurRI
rii=0
while [ $rii -lt $lencurRI ]
do
to_debug hist: rii $rii
to_debug hist: rii curRI $rii ${curRI[$rii]}
to_debug hist: rii curRO $rii ${curRO[$rii]}
RIAVG=`echo "scale=$Scale; $RIAVG + ${curRI[$rii]} " |bc`
ROAVG=`echo "scale=$Scale; $ROAVG + ${curRO[$rii]} " |bc`
let rii++
to_debug RIAVG $RIAVG
to_debug ROAVG $ROAVG
done
to_debug RIAVG $RIAVG
to_debug ROAVG $ROAVG
RIAVG=`echo "scale=$Scale; $RIAVG / $curNum " |bc`
ROAVG=`echo "scale=$Scale; $ROAVG / $curNum " |bc`
to_debug RIAVG $RIAVG
to_debug ROAVG $ROAVG
rii=0
while [ $rii -lt `expr $lencurRI - 1` ]
do
curRI[$rii]=${curRI[`expr $rii + 1`]}
curRO[$rii]=${curRO[`expr $rii + 1`]}
to_debug new: rii curRI $rii ${curRI[`expr $rii + 1 `]}
to_debug new: rii curRO $rii ${curRO[`expr $rii + 1 `]}
let rii++
done
curRI[$rii]=$bpsIn
curRO[$rii]=$bpsOut
echo $curC >$curSHD
echo ${curRI[@]} >>$curSHD
echo ${curRO[@]} >>$curSHD
to_debug new: all${curRI[@]}
to_debug new: all ${curRO[@]}
DiffRIAVG=`echo "scale=$Scale; $bpsIn - $RIAVG" |bc`
DiffROAVG=`echo "scale=$Scale; $bpsOut - $ROAVG" |bc`
to_debug DiffRIAVG $DiffRIAVG
to_debug DiffROAVG $DiffROAVG
DiffRIAVG=`echo $DiffRIAVG | sed 's/-//'`
DiffROAVG=`echo $DiffROAVG | sed 's/-//'`
to_debug DiffRIAVG $DiffRIAVG
to_debug DiffROAVG $DiffROAVG
DiffRIAVG=`echo "scale=$Scale; $DiffRIAVG / $RIAVG * 100 " |bc`
DiffROAVG=`echo "scale=$Scale; $DiffROAVG / $ROAVG* 100" |bc`
DiffAVGTotal=`echo "scale=$Scale; $DiffRIAVG+ $DiffROAVG" |bc`
to_debug DiffRIAVG $DiffRIAVG
to_debug DiffROAVG $DiffROAVG
to_debug DiffAVGTotal $DiffAVGTotal
fi
ctDiffRIAVG=`echo "scale=$Scale; $ctDiffRIAVG + $DiffRIAVG" |bc`
ctDiffROAVG=`echo "scale=$Scale; $ctDiffROAVG + $DiffROAVG" |bc`
to_debug ctDiffRIAVG $ctDiffRIAVG
to_debug ctDiffROAVG $ctDiffROAVG
else
#aggreating data
ctbpsIn=`echo $ctbpsIn + $bpsIn|bc`
ctbpsOut=`echo $ctbpsOut + $bpsOut|bc`
fi
done
if [ "$isNotEnough" = "True" ]; then
$Echo "OK - There was only `echo $curC -1 |bc` hist data before this check. We need the $curNum hist data to use for calculating. Please wait."
exit 0
fi
if [ "$IsFirst" = "True" ]; then
Severity="0"
Msg="OK"
OutPut="It is the first time of this plugins to run, or some data file lost. We will get the data from the next time."
$Echo "$Msg" "-" $OutPut
exit $Severity
fi
DiffRIAVG=`echo "scale=$Scale; $ctDiffRIAVG / $IntCnt" |bc`
DiffROAVG=`echo "scale=$Scale; $ctDiffROAVG / $IntCnt" |bc`
DiffAVGTotal=`echo "scale=$Scale; $DiffRIAVG+ $DiffROAVG" |bc`
to_debug DRIA $DiffRIAVG DROA $DiffROAVG DAVGT $DiffAVGTotal
#End of SM or SS
fi
#to K
uIn=`echo "$ctbpsIn / 1000" | bc`
uOut=`echo "$ctbpsOut / 1000" | bc`
#to M
if [ "$isM" = "True" ]; then
uIn=`echo "scale=$Scale; $uIn / 1000" | bc`
uOut=`echo "scale=$Scale; $uOut / 1000" | bc`
fi
#to B
if [ "$isB" = "True" ]; then
uIn=`echo "scale=$Scale; $uIn / 8 * (1000 / 1024)" | bc`
uOut=`echo "scale=$Scale; $uOut / 8 * (1000 / 1024)" | bc`
if [ "$isM" = "True" ]; then
uIn=`echo "scale=$Scale; $uIn / 8 * (1000 / 1024 ) " | bc`
uOut=`echo "scale=$Scale; $uOut / 8 * (1000 / 1024)" | bc`
fi
fi
to_debug Unit_1 is $Unit_1, Unit_2 is $Unit_2
to_debug Interval is $Interval, DiffIn is $DiffIn, DiffOut is $DiffOut, uIn is $uIn, uOut is $uOut
if [ $UseRange = "True" ] ;then
check_w1b=`echo "$uIn > $W1b" | bc`
check_w1e=`echo "$uIn < $W1e" | bc`
check_w2b=`echo "$uOut > $W2b" | bc`
check_w2e=`echo "$uOut < $W2e" | bc`
to_debug check_w1 is $check_w1b $check_w1e , check_w2 is $check_w2b $check_w2e
check_c1b=`echo "$uIn > $C1b" | bc`
check_c1e=`echo "$uIn < $C1e" | bc`
check_c2b=`echo "$uOut > $C2b" | bc`
check_c2e=`echo "$uOut < $C2e" | bc`
to_debug check_c1 is $check_c1b $check_c1e, check_c2 is $check_c2b $check_c2e
if [ $check_w1b -eq 1 -a $check_w1e -eq 1 -a $check_w2b -eq 1-a $check_w2e -eq 1] ; then
Severity="0";
Msg="OK";
to_debug Severity is $Severity , Msg is $Msg
elif [ $check_c1b -eq 1 -a $check_c1e -eq 1 -a $check_c2b -eq 1-a $check_c2e -eq 1] ; then
Severity="1";
Msg="Warning";
to_debug Severity is $Severity , Msg is $Msg
else
Severity="2";
Msg="Critical";
to_debug Severity is $Severity , Msg is $Msg
fi
elif [ $TrafficJitter"AA" = "TrueAA" ] ; then
check_w1=`echo "$DiffRIAVG < $W1" | bc`
check_w2=`echo "$DiffROAVG < $W2" | bc`
to_debug check_w1 is $check_w1 , check_w2 is $check_w2
check_c1=`echo "$DiffRIAVG < $C1" | bc`
check_c2=`echo "$DiffROAVG < $C2" | bc`
to_debug check_c1 is $check_c1 , check_c2 is $check_c2
if [ $check_w1 -eq 1 -a $check_w2 -eq 1 ] ; then
Severity="0";
Msg="OK";
to_debug Severity is $Severity , Msg is $Msg
elif [ $check_c1 -eq 1 -a $check_c2 -eq 1 ] ; then
Severity="1";
Msg="Warning";
to_debug Severity is $Severity , Msg is $Msg
else
Severity="2";
Msg="Critical";
to_debug Severity is $Severity , Msg is $Msg
fi
else
check_w1=`echo "$uIn < $W1" | bc`
check_w2=`echo "$uOut < $W2" | bc`
to_debug check_w1 is $check_w1 , check_w2 is $check_w2
check_c1=`echo "$uIn < $C1" | bc`
check_c2=`echo "$uOut < $C2" | bc`
to_debug check_c1 is $check_c1 , check_c2 is $check_c2
if [ $check_w1 -eq 1 -a $check_w2 -eq 1 ] ; then
Severity="0";
Msg="OK";
to_debug Severity is $Severity , Msg is $Msg
elif [ $check_c1 -eq 1 -a $check_c2 -eq 1 ] ; then
Severity="1";
Msg="Warning";
to_debug Severity is $Severity , Msg is $Msg
else
Severity="2";
Msg="Critical";
to_debug Severity is $Severity , Msg is $Msg
fi
fi
uTotal=`echo "$uIn + $uOut" | bc`
if [ `echo "$uIn < 1" | bc` -eq 1 ]; then
uIn="0"${uIn}
if [ "$uIn" = "00" ]; then
uIn=0.0
fi
fi
if [ `echo "$uOut < 1" | bc` -eq 1 ]; then
uOut="0"${uOut}
if [ "$uOut" = "00" ]; then
uOut=0.0
fi
fi
if [ `echo "$uTotal < 1" | bc` -eq 1 ]; then
uTotal="0"${uTotal}
if [ "$uTotal" = "00" ]; then
uTotal=0.0
fi
fi
to_debug Interval is $Interval, DiffIn is $DiffIn, DiffOut is $DiffOut, uIn is $uIn, uOut is $uOut, uTotal is $uTotal
if [ $UseRange = "True" ] ;then
if [ $Format"AA" = "SAA" ]; then
$Echo "$Msg" "-" In/Out "$uIn"${Unit_1}${Unit_2}/"$uOut"${Unit_1}${Unit_2}\|In\=${uIn}${Unit_1}${Unit_2}\;\;\;0\;0 Out\=${uOut}${Unit_1}${Unit_2}\;\;\;0\;0
elif [ $Format"AA" = "sAA" ]; then
$Echo "$Msg" "-" In/Out/Total/Interval "$uIn"${Unit_1}${Unit_2}/"$uOut"${Unit_1}${Unit_2}/"$uTotal"${Unit_1}${Unit_2}/"$Interval"s \|In\=${uIn}${Unit_1}${Unit_2}\;\;\;0\;0 Out\=${uOut}${Unit_1}${Unit_2}\;\;\;0\;0 Total\=${uTotal}${Unit_1}${Unit_2}\;\;\;0\;0 Interval\=${Interval}s\;1200\;1800\;0\;0
else
$Echo "$Msg" "-" The Traffic In is "$uIn"${Unit_1}${Unit_2}, Out is "$uOut"${Unit_1}${Unit_2}, Total is "$uTotal"${Unit_1}${Unit_2}. The Check Interval is "$Interval"s \|In\=${uIn}${Unit_1}${Unit_2}\;\;\;0\;0 Out\=${uOut}${Unit_1}${Unit_2}\;\;\;0\;0 Total\=${uTotal}${Unit_1}${Unit_2}\;\;\;0\;0 Interval\=${Interval}s\;1200\;1800\;0\;0
fi
exit $Severity
elif [ $TrafficJitter"AA" = "TrueAA" ]; then
if [ $Format"AA" = "SAA" ]; then
$Echo "$Msg" "-" Traffic Jitter In/Out "$DiffRIAVG""%"/"$DiffROAVG""%"\|In\=$DiffRIAVG\;${W1}\;${C1}\;0\;0 Out\=$DiffROAVG\;${W2}\;${C2}\;0\;0
elif [ $Format"AA" = "sAA" ]; then
$Echo "$Msg" "-" Traffic Jitter In/Out/Total/Interval "$DiffRIAVG""%"/"$DiffROAVG""%"/"$DiffAVGTotal""%"/"$Interval"s \|In\=$DiffRIAVG\;${W1}\;${C1}\;0\;0 Out\=$DiffROAVG\;${W2}\;${C2}\;0\;0 Total\=$DiffAVGTotal\;${Wt}\;${Ct}\;0\;0 Interval\=${Interval}s\;1200\;1800\;0\;0
else
$Echo "$Msg" "-" The Traffic Jitter In is "$DiffRIAVG""%", Out is "$DiffROAVG""%", Total is "$DiffAVGTotal""%". The Check Interval is "$Interval"s \|In\=$DiffRIAVG\;${W1}\;${C1}\;0\;0 Out\=$DiffROAVG\;${W2}\;${C2}\;0\;0 Total\=$DiffAVGTotal\;${Wt}\;${Ct}\;0\;0 Interval\=${Interval}s\;1200\;1800\;0\;0
fi
exit $Severity
else
if [ $Format"AA" = "SAA" ]; then
$Echo "$Msg" "-" In/Out "$uIn"${Unit_1}${Unit_2}/"$uOut"${Unit_1}${Unit_2}\|In\=${uIn}${Unit_1}${Unit_2}\;${W1}\;${C1}\;0\;0 Out\=${uOut}${Unit_1}${Unit_2}\;${W2}\;${C2}\;0\;0
elif [ $Format"AA" = "sAA" ]; then
$Echo "$Msg" "-" In/Out/Total/Interval "$uIn"${Unit_1}${Unit_2}/"$uOut"${Unit_1}${Unit_2}/"$uTotal"${Unit_1}${Unit_2}/"$Interval"s \|In\=${uIn}${Unit_1}${Unit_2}\;${W1}\;${C1}\;0\;0 Out\=${uOut}${Unit_1}${Unit_2}\;${W2}\;${C2}\;0\;0 Total\=${uTotal}${Unit_1}${Unit_2}\;${Wt}\;${Ct}\;0\;0 Interval\=${Interval}s\;1200\;1800\;0\;0
else
$Echo "$Msg" "-" The Traffic In is "$uIn"${Unit_1}${Unit_2}, Out is "$uOut"${Unit_1}${Unit_2}, Total is "$uTotal"${Unit_1}${Unit_2}. The Check Interval is "$Interval"s \|In\=${uIn}${Unit_1}${Unit_2}\;${W1}\;${C1}\;0\;0 Out\=${uOut}${Unit_1}${Unit_2}\;${W2}\;${C2}\;0\;0 Total\=${uTotal}${Unit_1}${Unit_2}\;${Wt}\;${Ct}\;0\;0 Interval\=${Interval}s\;1200\;1800\;0\;0
fi
exit $Severity
fi
# End of check_traffic.sh
页:
[1]