OpenBSD 5.8 发布预览，计划10月18日正式推送

YY-LIN

欢迎加入运维网交流群:263444886  
　　OpenBSD 5.8 发布预览，计划 2015 年 10 月 18 日正式发布。
　　

　　主要改进如下：

• 　　改进硬件支持：
  　　
  
  
  
  • 　　New rtwn(4) driver for Realtek RTL8188CE wifi cards.
    
  • 　　New hpb(4) driver for HyperTransport bridges as found in the IBM CPC945
    
  • 　　The ugold(4) driver now supports TEMPerHUMV1.x temperature and humidity sensors.
    
  • 　　Improved sensor support for the upd(4) driver for USB Power Devices (UPS).
    
  • 　　Support for jumbo frames on re(4) devices using RTL8168C/D/E/F/G and RTL8411, including PC Engines APU.
    
  • 　　re(4) now works with newer devices e.g. RTL8111GU.
    
  • 　　Partial support has been added for full-speed isochronous devices in ehci(4), allowing USB 1.1 audio devices to be used on EHCI-only systems in some cases.
    
  • 　　Improved macppc stability and G5 performances with MP kernels
    
  • 
    　　acpicpu(4) uses ACPI C-state information to reduce power consumption of>
    
  • 　　Kernel supports x86 AVX instructions on CPUs that have them.
    
  • 　　Avoid assigning low address to PCI BARs, fixing various issues on machines whose BIOSes neglect to claim low memory.
    
  • 　　wscons(4) works with even more odd trackpads.
    
  • 　　Added pvbus(4) paravirtual device tree root on virtual machines that are running on hypervisors.
    
  • 　　New octdwctwo(4) driver for USB support on OpenBSD/octeon.
    
  • 　　New amdcf(4) driver for embedded flash on OpenBSD/octeon.
    
  • 　　...
    
  
  
• 　　移除的硬件支持：
  　　
  
  
  
  • 　　The lmc(4) driver for Lan Media Corporation SSI/T1/DS1/HSSI/DS3 devices has been removed.
    
  • 　　The san(4) driver for Sangoma Technologies AFT T1/E1 devices has been removed.
    
  • 　　...
    
  
  
• 　　常规网络栈改进
  　　
  
  
  
  • 　　MTU of vlan(4) devices can now be set independently from the parent interface's MTU.
    
  • 　　The same network range can now be assigned to multiple interfaces, using interface priorities to choose between them.
    
  • 　　New  MPLS pseudowire driver mpw(4).
    
  • 　　...
    
  
  
• 　　安装器改进
  　　
  
  
  
  • 　　hostname-mode.conf response file names.
    
  • 　　response files to be placed in a subdir of the webserver's document root.
    
  • 　　passing a template file to        disklabel(8)       to automatically partition the disk.
    
  • 　　The default answer is now 'no'.
    
  • 　　'prohibit-password' has been added to the list of possible answers.
    
  • 　　The logic of the 'Allow root ssh login?' question has been changed.
    
  • 　　autoinstall(8)     has been extended to allow
    
  • 　　ntpd(8)     is now enabled by default at install time.
    
  • 　　DUID support has improved enough that new installs now use them unconditionally.
    
  • 　　Installing sets from CD-ROM has been fixed if more than one CD-ROM drive is present.
    
  • 　　The 'Which CD-ROM contains the install media?' question has been removed.     Available cdrom devices are now shown directly in the 'Location of sets?' prompt.
    　　
    　　
    
  
  
• 　　安全改进：
  　　
  
  
  
  • 　　sudo in base has been replaced with doas(1), sudo is available as a package.
    
  • 　　file(1) has been replaced with a new modern implementation, including sandbox and privilege separation.
    
  • 　　pax(1) (and tar(1) and cpio(1)) now prevent archive extraction from escaping the current directory via symlinks; tar(1) without -P option now strips up through any ".." path components.
    
  • 　　Improved kernel checks of ELF headers.
    
  • 　　...
    　　
    　　
    
  
  

　　详情请看发行说明和更新日志。
　　
　　OpenBSD是一个从NetBSD衍生出来的类Unix操作系统。专案领导人Theo de Raadt在1995年]发起了OpenBSD专案，希望创造一个注重安全的操作系统，此外OpenBSD也以高品质的文件、坚持开放程式码以及严格的软件授权著名。OpenBSD的吉祥物是河豚。
　　OpenBSD包含了一些在其他操作系统缺少或是选择性的安全功能，此外OpenBSD极度重视程式码的品质，任何对核心的修改都需要经过严格的程式码审阅。OpenBSD可以在17种不同的硬件环境下运作，包含DEC Alpha、Intel i386、Hewlett-Packard PA-RISC、AMD64、Motorola 68000、PowerPC、Sun SPARC等。