用nginx和uwsgi部署 Django

xiaui520

　　

This post attempts to be a complete guide to setting up a production-ready Django deployment. I’m publishing it because I hope it will help someone. It is subject to revision, as I get feedback from experience and other developers. I’m not going to populate this post with my usual literary cruft, either.
I’m using nginx and uWSGI because, so far, it’s been the best-performing combination I’ve tried. At low concurrency, it’s comparable in performance to Apache with mod_wsgi; as concurrency increases, it becomes screamingly fast in comparison. Speed is certainly a factor in making the choice, but nginx’s super-simple configuration doesn’t hurt its chances (zen[2]).
Let’s jump in.

Installation

• 
  Create a virtualenv. This will house a complete Python environment, and all the compiled nginx and uwsgi binaries:
  
  $ virtualenv examplesite
  $ cd examplesite/
  $ . bin/activate
  
  I like to create mine in /sites/ — for example, /sites/example.com/.
  
  
• 
  Download the nginx and uWSGI tarballs into a pkg/ directory:
  
  $ mkdir pkg && cd pkg/
  $ wget 'http://projects.unbit.it/downloads/uwsgi-0.9.4.2.tar.gz'
  $ wget 'http://nginx.org/download/nginx-0.7.65.tar.gz'
  
• 
  Start by compiling uWSGI. I prefer to use the ROCK_SOLID mode, as this is for a production site:
  
  $ tar -xzvf uwsgi-0.9.4.2.tar.gz
  $ cd uwsgi-0.9.4.2/
  $ make -f Makefile.ROCK_SOLID
  
  Note that you may need to edit Makefile.ROCK_SOLID for your particular version of Python. The last command will have created a binary called uwsgi_rs; move this into your virtualenv’s bin/ directory and rename it to uwsgi:
  
      $ mv uwsgi_rs $VIRTUAL_ENV/bin/uwsgi
  
• 
  Next, you’ll compile nginx with the uWSGI extension module. Extract the nginx tarball and enter the directory:
  
  $ cd $VIRTUAL_ENV/pkg
  $ tar -xzvf nginx-0.7.65.tar.gz
  $ cd nginx-0.7.65/
  
  You may have your own preferred setup for nginx; you just need to add a single option:
  
  $ ./configure --add-module=../uwsgi-0.9.4.2/nginx/
  
  Now compile the web server:
  
  $ make
  
  This will create an nginx binary in objs/; install this into the virtualenv:
  
  $ mv objs/nginx $VIRTUAL_ENV/bin/nginx
  

You now have all the required (non-Python) software to deploy a Django project under nginx/uWSGI. Keep the pkg/ directory and its contents for now; you’ll need them during configuration.

Configuration

There are a few parts to configure before you can run the web server. nginx is configured using a standalone plain-text configuration file (nginx.conf), whereas uWSGI, in ROCK_SOLID mode, uses only command-line options. Before considering any of this, however, it’s best to take a look at the structure of the deployment. I like to put my Django project directly under the virtualenv, like so:

uwsgitest/
|-- PROJECT_ROOT/
|   |-- apps/
|   |-- etc/ -> etcs/DEPLOYMENT_NAME
|   |-- etcs/
|   |-- libs/
|   |-- media/
|   |-- settings/
|   |-- templates/
|   |-- .hgignore
|   |-- README
|   |-- REQUIREMENTS
|   |-- __init__.py
|   `-- urls.py
|-- bin/
|-- include/
|-- lib/
`-- pkg/

This follows the layout discussed in my previous blog post on Django project conventions. You should do the usual set-up as described in that post; symlink the project root onto the site path, add DJANGO_SETTINGS_MODULE to the bin/activate script, et cetera.
And now for the main event.

• 
  Create an etcs/production directory to keep plain-text configs in:
  
  $ cd $VIRTUAL_ENV/PROJECT_ROOT
  $ mkdir -p etcs/production
  
  Symlink PROJECT_ROOT/etc/ to PROJECT_ROOT/etcs/production/, to represent the currently-activated config directory:
  
  $ ln -s $PROJECT_ROOT/etcs/production $PROJECT_ROOT/etc
  
  This whole architecture is so that you can create different sets of plain-text configs for different deployments. Again, read my blog post for more information.
  
  
• 
  Now to configure nginx. There are a couple of required files which are imported into the config; you’ll need to add these to the config directory. Copy the file mime.types from the nginx tarball into etcs/production:
  
  $ cp $VIRTUAL_ENV/pkg/nginx-0.7.65/conf/mime.types etcs/production/
  
  Then, add uwsgi_params from the uWSGI tarball:
  
  $ cp $VIRTUAL_ENV/pkg/uwsgi-0.9.4.2/nginx/uwsgi_params etcs/production/
  
• 
  What follows is the meat of the nginx configuration. Make sure you read and understand it thoroughly; there’s nothing particularly difficult about it:
  
  worker_processes  1;
  pid               pid/nginx.pid;
  error_log         log/nginx-error.log;
  events {
  worker_connections  1024;
  }
  http {
  # Some sensible defaults.
  include               mime.types;
  default_type          application/octet-stream;
  keepalive_timeout     10;
  client_max_body_size  20m;
  sendfile              on;
  gzip                  on;
  # Directories
  client_body_temp_path tmp/client_body/  2 2;
  fastcgi_temp_path     tmp/fastcgi/;
  proxy_temp_path       tmp/proxy/;
  uwsgi_temp_path       tmp/uwsgi/;
  # Logging
  access_log            log/nginx-access.log  combined;
  # uWSGI serving Django.
  upstream django {
  # Distribute requests to servers based on client IP. This keeps load
  # balancing fair but consistent per-client. In this instance we're
  # only using one uWGSI worker anyway.
  ip_hash;
  server unix:sock/uwsgi.sock;
  }
  server {
  listen      80;
  server_name example.com;
  charset     utf-8;
  # Django admin media.
  location /media/admin/ {
  alias lib/python2.6/site-packages/django/contrib/admin/media/;
  }
  # Your project's static media.
  location /media/ {
  alias PROJECT_ROOT/media/;
  }
  # Finally, send all non-media requests to the Django server.
  location / {
  uwsgi_pass  django;
  include     uwsgi_params;
  }
  }
  }
  
  You should put this in etcs/production/nginx.conf; also, make sure you replacePROJECT_ROOT, example.com and python2.6 with the appropriate values.
  
  
• 
  You now need to create the necessary directories. From the root of your virtualenv:
  
  $ mkdir tmp/ sock/ pid/ log/
  
• 
  Finally, you’ll need a module containing a WSGI callable called application. This is used by uWSGI. You can just put the following in a file called wsgi.py in your PROJECT_ROOT:
  
  import django.core.handlers.wsgi
  application = django.core.handlers.wsgi.WSGIHandler()
  

And that’s it for configuration!

Execution

Of course, another key step in the whole process is running nginx and uWSGI. Most people have preferred ways of running daemons; I like to use Supervisor, but others prefer init or daemontools. I don’t really want to put a whole config here; instead I’ll tell you what you need to run.

nginx

The command for nginx is very simple. From the root of your virtualenv:

$ bin/nginx -p `pwd`/ -c PROJECT_ROOT/etc/nginx.conf

You may need to run nginx as root (e.g. via sudo) to listen on port 80; I tend to just try running it on port 8080 while I’m setting it up, so I can avoid permissions problems in the beginning. I won’t try and dictate how you should organize your users, groups and permissions — nginx is pretty flexible, anyway.

uWSGI

As I mentioned before, uWSGI’s ‘configuration’ is made up of the command-line arguments you choose to pass to it. See the output of uwsgi -h for detailed information. Here’s a very simple example (but one which works fine):

$ bin/uwsgi -p 4 -s sock/uwsgi.sock -H `pwd`/ PROJECT_NAME.wsgi

The breakdown:

• 
  -p 4 tells uWSGI to run four worker processes.
  
• 
  -s sock/uwsgi.sock specifies the UNIX socket file to use.
  
• 
  -H `pwd/` tells uWSGI to use the current virtualenv.
  
• 
  PROJECT_NAME.wsgi is the name of a module with an application callable (i.e. your WSGI app).
  

Just run nginx and uWSGI as detailed above and try visiting your site. It should all work perfectly. You might want to try running a HTTP benchmark or load tester on it, to see how it stacks up.
Also, refer to: http://www.westphahl.net/blog/2010/4/8/running-django-nginx-and-uwsgi/