Python Format String Specification

xq8995209

　　Since it is very common that you will deal with the string format, so I guess it is good to have some references of somehow that you can quickly look up. It desire a page of its own.
　　Basically there are two types of formatting string that you may use.
　　The first one is the Old String Format. It uses the % operator. here is one example of the old format string.
　　You can find more details in this page: "Old String Formatting"
　　


>>> import math
>>> print 'The value of PI is approximately %5.3f.' % math.pi
The value of PI is approximately 3.142.
　　However, now it is recommended that you use str.format method. And below is excerpt from the original document on String Formatting Operations section.
　　


7.1.3. Format String Syntax


The str.format() method and the Formatter class share the same syntax for format strings (although in the case of Formatter, subclasses can define their own format string syntax).
Format strings contain “replacement fields” surrounded by curly braces {}. Anything that is not contained in braces is considered literal text, which is copied unchanged to the output. If you need to include a brace character in the literal text, it can be escaped by doubling: {{ and }}.
The grammar for a replacement field is as follows:

replacement_field ::=  "{" [field_name] ["!" conversion] [":" format_spec] "}"
field_name       ::=  arg_name ("." attribute_name | "[" element_index "]")*
arg_name          ::=  [identifier | integer]
attribute_name    ::=  identifier
element_index    ::=  integer | index_string
index_string      ::=  <any source character except "]"> +
conversion       ::=  "r" | "s"
format_spec       ::=  <described in the next section>

In less formal terms, the replacement field can start with a field_name that specifies the object whose value is to be formatted and inserted into the output instead of the replacement field. The field_name is optionally followed by a conversion field, which is preceded by an exclamation point '!', and a format_spec, which is preceded by a colon ':'. These specify a non-default format for the replacement value.
See also the Format Specification Mini-Language section.
The field_name itself begins with an arg_name that is either a number or a keyword. If it’s a number, it refers to a positional argument, and if it’s a keyword, it refers to a named keyword argument. If the numerical arg_names in a format string are 0, 1, 2, ... in sequence, they can all be omitted (not just some) and the numbers 0, 1, 2, ... will be automatically inserted in that order. Becausearg_name is not quote-delimited, it is not possible to specify arbitrary dictionary keys (e.g., the strings '10' or ':-]') within a format string. The arg_name can be followed by any number of index or attribute expressions. An expression of the form '.name' selects the named attribute using getattr(), while an expression of the form '[index]' does an index lookup using __getitem__().
Changed in version 2.7: The positional argument specifiers can be omitted, so '{} {}' is equivalent to '{0} {1}'.
Some simple format string examples:

"First, thou shalt count to {0}" # References first positional argument
"Bring me a {}"                  # Implicitly references the first positional argument
"From {} to {}"                  # Same as "From {0} to {1}"
"My quest is {name}"             # References keyword argument 'name'
"Weight in tons {0.weight}"      # 'weight' attribute of first positional arg
"Units destroyed: {players[0]}"  # First element of keyword argument 'players'.





The conversion field causes a type coercion before formatting. Normally, the job of formatting a value is done by the __format__()method of the value itself. However, in some cases it is desirable to force a type to be formatted as a string, overriding its own definition of formatting. By converting the value to a string before calling __format__(), the normal formatting logic is bypassed.
Two conversion flags are currently supported: '!s' which calls str() on the value, and '!r' which calls repr().
Some examples:

"Harold's a clever {0!s}"        # Calls str() on the argument first
"Bring out the holy {name!r}"    # Calls repr() on the argument first





The format_spec field contains a specification of how the value should be presented, including such details as field width, alignment, padding, decimal precision and so on. Each value type can define its own “formatting mini-language” or interpretation of the format_spec.
Most built-in types support a common formatting mini-language, which is described in the next section.
A format_spec field can also include nested replacement fields within it. These nested replacement fields can contain only a field name; conversion flags and format specifications are not allowed. The replacement fields within the format_spec are substituted before the format_spec string is interpreted. This allows the formatting of a value to be dynamically specified.
See the Format examples section for some examples.

7.1.3.1. Format Specification Mini-Language


“Format specifications” are used within replacement fields contained within a format string to define how individual values are presented (see Format String Syntax). They can also be passed directly to the built-in format() function. Each formattable type may define how the format specification is to be interpreted.
Most built-in types implement the following options for format specifications, although some of the formatting options are only supported by the numeric types.
A general convention is that an empty format string ("") produces the same result as if you had called str() on the value. A non-empty format string typically modifies the result.
The general form of a standard format specifier is:

format_spec ::=  [[fill]align][sign][#][0][width][,][.precision][type]
fill       ::=  <a character other than '{' or '}'>
align       ::=  "<" | ">" | "=" | "^"
sign       ::=  "+" | "-" | " "
width       ::=  integer
precision   ::=  integer
type       ::=  "b" | "c" | "d" | "e" | "E" | "f" | "F" | "g" | "G" | "n" | "o" | "s" | "x" | "X" | "%"

The fill character can be any character other than ‘{‘ or ‘}’. The presence of a fill character is signaled by the character following it, which must be one of the alignment options. If the second character of format_spec is not a valid alignment option, then it is assumed that both the fill character and the alignment option are absent.
The meaning of the various alignment options is as follows:

Option
Meaning

'<'
Forces the field to be left-aligned within the available space (this is the default for most objects).


'>'
Forces the field to be right-aligned within the available space (this is the default for numbers).


'='
Forces the padding to be placed after the sign (if any) but before the digits. This is used for printing fields in the form ‘+000000120’. This alignment option is only valid for numeric types.


'^'
Forces the field to be centered within the available space.

Note that unless a minimum field width is defined, the field width will always be the same size as the data to fill it, so that the alignment option has no meaning in this case.
The sign option is only valid for number types, and can be one of the following:

Option
Meaning

'+'
indicates that a sign should be used for both positive as well as negative numbers.


'-'
indicates that a sign should be used only for negative numbers (this is the default behavior).


space
indicates that a leading space should be used on positive numbers, and a minus sign on negative numbers.

The '#' option is only valid for integers, and only for binary, octal, or hexadecimal output. If present, it specifies that the output will be prefixed by '0b', '0o', or '0x', respectively.
The ',' option signals the use of a comma for a thousands separator. For a locale aware separator, use the 'n' integer presentation type instead.
Changed in version 2.7: Added the ',' option (see also PEP 378).
width is a decimal integer defining the minimum field width. If not specified, then the field width will be determined by the content.
If the width field is preceded by a zero ('0') character, this enables zero-padding. This is equivalent to an alignment type of '=' and a fill character of '0'.
The precision is a decimal number indicating how many digits should be displayed after the decimal point for a floating point value formatted with 'f' and 'F', or before and after the decimal point for a floating point value formatted with 'g' or 'G'. For non-number types the field indicates the maximum field size - in other words, how many characters will be used from the field content. Theprecision is not allowed for integer values.
Finally, the type determines how the data should be presented.
The available string presentation types are:

Type
Meaning

's'
String format. This is the default type for strings and may be omitted.


None
The same as 's'.

The available integer presentation types are:

Type
Meaning

'b'
Binary format. Outputs the number in base 2.


'c'
Character. Converts the integer to the corresponding unicode character before printing.


'd'
Decimal Integer. Outputs the number in base 10.


'o'
Octal format. Outputs the number in base 8.


'x'
Hex format. Outputs the number in base 16, using lower- case letters for the digits above 9.


'X'
Hex format. Outputs the number in base 16, using upper- case letters for the digits above 9.


'n'
Number. This is the same as 'd', except that it uses the current locale setting to insert the appropriate number separator characters.


None
The same as 'd'.

In addition to the above presentation types, integers can be formatted with the floating point presentation types listed below (except'n' and None). When doing so, float() is used to convert the integer to a floating point number before formatting.
The available presentation types for floating point and decimal values are:

Type
Meaning

'e'
Exponent notation. Prints the number in scientific notation using the letter ‘e’ to indicate the exponent.


'E'
Exponent notation. Same as 'e' except it uses an upper case ‘E’ as the separator character.


'f'
Fixed point. Displays the number as a fixed-point number.


'F'
Fixed point. Same as 'f'.


'g'

General format. For a given precision p >= 1, this rounds the number to p significant digits and then formats the result in either fixed-point format or in scientific notation, depending on its magnitude.
The precise rules are as follows: suppose that the result formatted with presentation type 'e' and precision p-1 would have exponent exp. Then if -4 <= exp < p, the number is formatted with presentation type 'f' and precision p-1-exp. Otherwise, the number is formatted with presentation type'e' and precision p-1. In both cases insignificant trailing zeros are removed from the significand, and the decimal point is also removed if there are no remaining digits following it.
Positive and negative infinity, positive and negative zero, and nans, are formatted as inf, -inf, 0, -0and nan respectively, regardless of the precision.
A precision of 0 is treated as equivalent to a precision of 1.




'G'
General format. Same as 'g' except switches to 'E' if the number gets too large. The representations of infinity and NaN are uppercased, too.


'n'
Number. This is the same as 'g', except that it uses the current locale setting to insert the appropriate number separator characters.


'%'
Percentage. Multiplies the number by 100 and displays in fixed ('f') format, followed by a percent sign.


None
The same as 'g'.

7.1.3.2. Format examples


This section contains examples of the new format syntax and comparison with the old %-formatting.
In most of the cases the syntax is similar to the old %-formatting, with the addition of the {} and with : used instead of %. For example, '%03.2f' can be translated to '{:03.2f}'.
The new format syntax also supports new and different options, shown in the follow examples.
Accessing arguments by position:

>>>
>>> '{0}, {1}, {2}'.format('a', 'b', 'c')
'a, b, c'
>>> '{}, {}, {}'.format('a', 'b', 'c')  # 2.7+ only
'a, b, c'
>>> '{2}, {1}, {0}'.format('a', 'b', 'c')
'c, b, a'
>>> '{2}, {1}, {0}'.format(*'abc')      # unpacking argument sequence
'c, b, a'
>>> '{0}{1}{0}'.format('abra', 'cad')   # arguments' indices can be repeated
'abracadabra'





Accessing arguments by name:

>>>
>>> 'Coordinates: {latitude}, {longitude}'.format(latitude='37.24N', longitude='-115.81W')
'Coordinates: 37.24N, -115.81W'
>>> coord = {'latitude': '37.24N', 'longitude': '-115.81W'}
>>> 'Coordinates: {latitude}, {longitude}'.format(**coord)
'Coordinates: 37.24N, -115.81W'





Accessing arguments’ attributes:

>>>
>>> c = 3-5j
>>> ('The complex number {0} is formed from the real part {0.real} '
... 'and the imaginary part {0.imag}.').format(c)
'The complex number (3-5j) is formed from the real part 3.0 and the imaginary part -5.0.'
>>> class Point(object):
...     def __init__(self, x, y):
...         self.x, self.y = x, y
...     def __str__(self):
...         return 'Point({self.x}, {self.y})'.format(self=self)
...
>>> str(Point(4, 2))
'Point(4, 2)'





Accessing arguments’ items:

>>>
>>> coord = (3, 5)
>>> 'X: {0[0]};  Y: {0[1]}'.format(coord)
'X: 3;  Y: 5'





Replacing %s and %r:

>>>
>>> "repr() shows quotes: {!r}; str() doesn't: {!s}".format('test1', 'test2')
"repr() shows quotes: 'test1'; str() doesn't: test2"





Aligning the text and specifying a width:

>>>
>>> '{:<30}'.format('left aligned')
'left aligned                  '
>>> '{:>30}'.format('right aligned')
'                 right aligned'
>>> '{:^30}'.format('centered')
'           centered           '
>>> '{:*^30}'.format('centered')  # use '*' as a fill char
'***********centered***********'





Replacing %+f, %-f, and % f and specifying a sign:

>>>
>>> '{:+f}; {:+f}'.format(3.14, -3.14)  # show it always
'+3.140000; -3.140000'
>>> '{: f}; {: f}'.format(3.14, -3.14)  # show a space for positive numbers
' 3.140000; -3.140000'
>>> '{:-f}; {:-f}'.format(3.14, -3.14)  # show only the minus -- same as '{:f}; {:f}'
'3.140000; -3.140000'





Replacing %x and %o and converting the value to different bases:

>>>
>>> # format also supports binary numbers
>>> "int: {0:d};  hex: {0:x};  oct: {0:o};  bin: {0:b}".format(42)
'int: 42;  hex: 2a;  oct: 52;  bin: 101010'
>>> # with 0x, 0o, or 0b as prefix:
>>> "int: {0:d};  hex: {0:#x};  oct: {0:#o};  bin: {0:#b}".format(42)
'int: 42;  hex: 0x2a;  oct: 0o52;  bin: 0b101010'





Using the comma as a thousands separator:

>>>
>>> '{:,}'.format(1234567890)
'1,234,567,890'





Expressing a percentage:

>>>
>>> points = 19.5
>>> total = 22
>>> 'Correct answers: {:.2%}'.format(points/total)
'Correct answers: 88.64%'





Using type-specific formatting:

>>>
>>> import datetime
>>> d = datetime.datetime(2010, 7, 4, 12, 15, 58)
>>> '{:%Y-%m-%d %H:%M:%S}'.format(d)
'2010-07-04 12:15:58'





Nesting arguments and more complex examples:

>>>
>>> for align, text in zip('<^>', ['left', 'center', 'right']):
...     '{0:{fill}{align}16}'.format(text, fill=align, align=align)
...
'left<<<<<<<<<<<<'
'^^^^^center^^^^^'
'>>>>>>>>>>>right'
>>>
>>> octets = [192, 168, 0, 1]
>>> '{:02X}{:02X}{:02X}{:02X}'.format(*octets)
'C0A80001'
>>> int(_, 16)
3232235521
>>>
>>> width = 5
>>> for num in range(5,12):
...     for base in 'dXob':
...         print '{0:{width}{base}}'.format(num, base=base, width=width),
...     print
...
    5     5     5   101
    6     6     6   110
    7     7     7   111
    8     8    10  1000
    9     9    11  1001
   10     A    12  1010
   11     B    13  1011