|
|
更新yum源，并更新系统
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
yum update
安装支持库
yum -y install wget vim lsof lrzsz pcre-devel zlib-devel make gd-devel libjpeg-devel libpng-devel libxml2-devel bzip2-devel libcurl-devel libmcrypt libmcrypt-devel mcrypt mhash net-snmp-devel
yum -y install gcc bison bison-devel openssl-devel readline-devel libedit-devel sqlite-devel freetype freetype-devel libevent-devel mysql-devel
关闭防火墙和selinux
systemctl stop firewalld.service #停止firewall
systemctl disable firewalld.service #禁止firewall开机启动
setenforce 0
注意：安装包统一放在cd /opt/
wget http://nginx.org/download/nginx-1.4.0.tar.gz
wget http://mirrors.sohu.com/php/php-7.2.6.tar.gz
wget https://cdn.mysql.com//Downloads/MySQL-5.7/mysql-5.7.22-linux-glibc2.12-x86_64.tar.gz
wget https://jaist.dl.sourceforge.net/project/zabbix/ZABBIX%20Latest%20Stable/3.4.10/zabbix-3.4.10.tar.gz
安装nginx
cd /opt/
tar -zxf nginx-1.4.0.tar.gz
cd nginx-1.4.0
./configure --prefix=/usr/local/nginx --with-http_realip_module --with-http_sub_module --with-http_gzip_static_module --with-http_stub_status_module --with-pcre
make && make install
chown -R nobody:nobody /usr/local/nginx/
配置启动文件
vim /etc/init.d/nginx
#!/bin/bash
# chkconfig: - 30 21
# description: http service.
# Source Function Library
. /etc/init.d/functions
# Nginx Settings
NGINX_SBIN="/usr/local/nginx/sbin/nginx"
NGINX_CONF="/usr/local/nginx/conf/nginx.conf"
NGINX_PID="/usr/local/nginx/logs/nginx.pid"
RETVAL=0
prog="Nginx"
start() {
echo -n $"Starting $prog: "
mkdir -p /dev/shm/nginx_temp
daemon $NGINX_SBIN -c $NGINX_CONF
RETVAL=$?
echo
return $RETVAL
}
stop() {
echo -n $"Stopping $prog: "
killproc -p $NGINX_PID $NGINX_SBIN -TERM
rm -rf /dev/shm/nginx_temp
RETVAL=$?
echo
return $RETVAL
}
reload(){
echo -n $"Reloading $prog: "
killproc -p $NGINX_PID $NGINX_SBIN -HUP
RETVAL=$?
echo
return $RETVAL
}
restart(){
stop
start
}
configtest(){
$NGINX_SBIN -c $NGINX_CONF -t
return 0
}
case "$1" in
start)
start
;;
stop)
stop
;;
>
> ;;
restart)
restart
;;
configtest)
configtest
;;
*)
echo $"Usage: $0 {start|stop|reload|restart|configtest}"
RETVAL=1
esac
exit $RETVAL
chmod +x /etc/init.d/nginx
添加开机自启
chkconfig nginx on
编辑nginx配置文件：
vi /usr/local/nginx/conf/nginx.conf
user nobody nobody;
worker_processes 2;
error_log /usr/local/nginx/logs/nginx_error.log crit;
pid /usr/local/nginx/logs/nginx.pid;
worker_rlimit_nofile 51200;
events
{
use epoll;
worker_connections 6000;
}
http
{
include mime.types;
default_type application/octet-stream;
server_names_hash_bucket_size 3526;
server_names_hash_max_size 4096;
log_format combined_realip '$remote_addr $http_x_forwarded_for [$time_local]'
'$host "$request_uri" $status'
'"$http_referer" "$http_user_agent"';
sendfile on;
tcp_nopush on;
keepalive_timeout 30;
client_header_timeout 3m;
client_body_timeout 3m;
send_timeout 3m;
connection_pool_size 256;
client_header_buffer_size 1k;
large_client_header_buffers 8 4k;
request_pool_size 4k;
output_buffers 4 32k;
postpone_output 1460;
client_max_body_size 10m;
client_body_buffer_size 256k;
client_body_temp_path /usr/local/nginx/client_body_temp;
proxy_temp_path /usr/local/nginx/proxy_temp;
fastcgi_temp_path /usr/local/nginx/fastcgi_temp;
fastcgi_intercept_errors on;
tcp_nodelay on;
gzip on;
gzip_min_length 1k;
gzip_buffers 4 8k;
gzip_comp_level 5;
gzip_http_version 1.1;
gzip_types text/plain application/x-javascript text/css text/htm application/xml;
server
{
listen 85;
server_name localhost;
index index.html index.htm index.php;
root /usr/local/nginx/html;
location ~ \.php$ {
include fastcgi_params;
fastcgi_pass unix:/tmp/php-fcgi.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /usr/local/nginx/html$fastcgi_script_name;
}
}
}
检查语法：
/usr/local/nginx/sbin/nginx -t
service nginx start #启动nginx
检查进程和端口
[root@data-node1 local]# ps -ef|grep nginx
root 14505 1 0 15:33 ? 00:00:00 nginx: master process /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf
nobody 14506 14505 0 15:33 ? 00:00:00 nginx: worker process
[root@data-node1 local]# netstat -tunpl
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 14505/nginx: master
安装php
useradd -s /sbin/nologin php-fpm
cd /opt/
tar -zxvf php-7.2.6.tar.gz
cd php-7.2.6
./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --enable-fpm --with-fpm-user=php-fpm --with-fpm-group=php-fpm --with-mysql=mysqlnd --with-pdo-mysql=mysqlnd --with-mysqli=mysqlnd --with-libxml-dir --with-gd --with-jpeg-dir --with-png-dir --with-freetype-dir --with-iconv-dir --with-zlib-dir --with-mcrypt --enable-soap --enable-gd-native-ttf --enable-ftp --enable-mbstring --enable-exif --disable-ipv6 --with-pear --with-curl --enable-bcmath --enable-mbstring --enable-sockets --with-gd --with-libxml-dir=/usr/local --with-gettext
报错处理
解决
使用yum命令安装
yum install php-mcrypt libmcrypt libmcrypt-devel
报错
今天安装PHP的时候提示这个错误 configure: error: png.h not found.，这个是选择安装GD模块才会出现的错误
解决
经查资料说是libpng，devel包没安装，
执行下面两条命令即可解决
yum install libpng-devel libpng
然后重新编译安装就行了
报错
configure: error: libxml2 not found. Please check your libxml2 installation.
解决:
yum -y install libxml2-devel
重新执行上面配置:
报错:
configure: error: Cannot find OpenSSL's
解决:
yum install openssl-devel
报错:
checking for cURL 7.10.5 or greater... configure: error: cURL version 7.10.5 or later is required to compile php with cURL support
解决:
yum -y install curl-devel
报错:
configure: error: jpeglib.h not found.
解决:
yum install libjpeg-devel
报错:
configure: error: freetype-config not found.
解决：
yum -y install freetype-devel
解决过上面报错信息，我们重新执行一下上面./configure 的所有命令:
出现 Thank you for using PHP. 证明我们配置成功了
configure: creating ./config.status
creating main/internal_functions.c
creating main/internal_functions_cli.c
+--------------------------------------------------------------------+
| License: |
| This software is subject to the PHP License, available in this |
| distribution in the file LICENSE. By continuing this installation |
| process, you are bound by the terms of this license agreement. |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point. |
+--------------------------------------------------------------------+
Thank you for using PHP.
config.status: creating php7.spec
config.status: creating main/build-defs.h
config.status: creating scripts/phpize
config.status: creating scripts/man1/phpize.1
config.status: creating scripts/php-config
config.status: creating scripts/man1/php-config.1
config.status: creating sapi/cli/php.1
config.status: creating sapi/fpm/php-fpm.conf
config.status: creating sapi/fpm/www.conf
config.status: creating sapi/fpm/init.d.php-fpm
config.status: creating sapi/fpm/php-fpm.service
config.status: creating sapi/fpm/php-fpm.8
config.status: creating sapi/fpm/status.html
config.status: creating sapi/cgi/php-cgi.1
config.status: creating ext/phar/phar.1
config.status: creating ext/phar/phar.phar.1
config.status: creating main/php_config.h
config.status: executing default commands
configure: WARNING: unrecognized options: --with-mcrypt, --with-mysql, --enable-gd-native-ttf, --enable-redis, --enable-fastcgi
//这里会出现上面的warning 是因为configure命令没有识别出来，这个configure大家根据自己需求进行配置，我是参考其他人的使用的
在编译安装时，
提示unrecognized options: –with-mcrypt, –enable-gd-native-ttf
表示php7.2不支持这两个选项，
把上面两个编译选项删除就可以了。
在phh7.1时，
官方就开始建议用openssl_*系列函数代替Mcrypt_*系列的函数。
编译和编译安装
make && make install
最后结果如下:
Installing shared extensions: /usr/local/php7/lib/php/extensions/no-debug-non-zts-20170718/
Installing PHP CLI binary: /usr/local/php7/bin/
Installing PHP CLI man page: /usr/local/php7/php/man/man1/
Installing PHP FPM binary: /usr/local/php7/sbin/
Installing PHP FPM defconfig: /usr/local/php7/etc/
Installing PHP FPM man page: /usr/local/php7/php/man/man8/
Installing PHP FPM status page: /usr/local/php7/php/php/fpm/
Installing phpdbg binary: /usr/local/php7/bin/
Installing phpdbg man page: /usr/local/php7/php/man/man1/
Installing PHP CGI binary: /usr/local/php7/bin/
Installing PHP CGI man page: /usr/local/php7/php/man/man1/
Installing build environment: /usr/local/php7/lib/php/build/
Installing header files: /usr/local/php7/include/php/
Installing helper programs: /usr/local/php7/bin/
program: phpize
program: php-config
Installing man pages: /usr/local/php7/php/man/man1/
page: phpize.1
page: php-config.1
/usr/local/src/php-7.2.4/build/shtool install -c ext/phar/phar.phar /usr/local/php7/bin
ln -s -f phar.phar /usr/local/php7/bin/phar
Installing PDO headers: /usr/local/php7/include/php/ext/pdo/
[root@localhost php-7.2.4]# echo $?
0
证明我们安装成功了
cp php.ini-production /usr/local/php/etc/php.ini
更改php.ini文件
sed -i 's/post_max_size = 8M/post_max_size = 32M/g' /usr/local/php/etc/php.ini
sed -i 's/upload_max_filesize = 2M/upload_max_filesize = 50M/g' /usr/local/php/etc/php.ini
sed -i 's/;date.timezone =/date.timezone =PRC/' /usr/local/php/etc/php.ini
sed -i 's/max_execution_time = 30/max_execution_time = 600/g' /usr/local/php/etc/php.ini
sed -i 's/max_input_time = 60/max_input_time = 600/g' /usr/local/php/etc/php.ini
sed -i 's/memory_limit = 128M/memory_limit = 256M/g' /usr/local/php/etc/php.ini
配置php-fpm.conf
vim /usr/local/php/etc/php-fpm.conf
[global]
pid = /usr/local/php/var/run/php-fpm.pid
error_log = /usr/local/php/var/log/php-fpm.log
[www]
listen = /tmp/php-fcgi.sock
user = php-fpm
group = php-fpm
listen.owner = nobody
listen.group = nobody
pm = dynamic
pm.max_children = 50
pm.start_servers = 20
pm.min_spare_servers = 5
pm.max_spare_servers = 35
pm.max_requests = 500
rlimit_files = 1024
检查语法
/usr/local/php/sbin/php-fpm -t
启动php
/usr/local/php/sbin/php-fpm
添加php-fpm启动脚本
/etc/init.d/ 文件夹下的php-fpm脚步文件
vim /etc/init.d/php-fpm
php启动脚本
#! /bin/sh
### BEGIN INIT INFO
# Provides: php-fpm
# Required-Start: $remote_fs $network
# Required-Stop: $remote_fs $network
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: starts php-fpm
# Description: starts the PHP FastCGI Process Manager daemon
### END INIT INFO
prefix=/usr/local/php
exec_prefix=${prefix}
php_fpm_BIN=${exec_prefix}/sbin/php-fpm
php_fpm_CONF=${prefix}/etc/php-fpm.conf
php_fpm_PID=${prefix}/var/run/php-fpm.pid
php_opts="--fpm-config $php_fpm_CONF --pid $php_fpm_PID"
wait_for_pid () {
try=0
while test $try -lt 35 ; do
case "$1" in
'created')
if [ -f "$2" ] ; then
try=''
break
fi
;;
'removed')
if [ ! -f "$2" ] ; then
try=''
break
fi
;;
esac
echo -n .
try=`expr $try + 1`
sleep 1
done
}
case "$1" in
start)
echo -n "Starting php-fpm "
$php_fpm_BIN --daemonize $php_opts
if [ "$?" != 0 ] ; then
echo " failed"
exit 1
fi
wait_for_pid created $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
stop)
echo -n "Gracefully shutting down php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -QUIT `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed. Use force-quit"
exit 1
else
echo " done"
fi
;;
status)
if [ ! -r $php_fpm_PID ] ; then
echo "php-fpm is stopped"
exit 0
fi
PID=`cat $php_fpm_PID`
if ps -p $PID | grep -q $PID; then
echo "php-fpm (pid $PID) is running..."
else
echo "php-fpm dead but pid file exists"
fi
;;
force-quit)
echo -n "Terminating php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -TERM `cat $php_fpm_PID`
wait_for_pid removed $php_fpm_PID
if [ -n "$try" ] ; then
echo " failed"
exit 1
else
echo " done"
fi
;;
restart)
$0 stop
$0 start
;;
> echo -n "Reload service php-fpm "
if [ ! -r $php_fpm_PID ] ; then
echo "warning, no pid file found - php-fpm is not running ?"
exit 1
fi
kill -USR2 `cat $php_fpm_PID`
echo " done"
;;
*)
echo "Usage: $0 {start|stop|force-quit|restart|reload|status}"
exit 1
;;
esac
chkconfig --add /etc/init.d/php-fpm
chkconfig --level 3 php-fpm on
添加到开机自启动
加权限并启动服务
chmod +x /etc/init.d/php-fpm
[root@web1 init.d]# /etc/init.d/php-fpm stop
Gracefully shutting down php-fpm . done
[root@web1 init.d]#
[root@web1 init.d]#
[root@web1 init.d]# ps -ef|grep php-fpm
root 41607 34132 0 14:30 pts/2 00:00:00 grep --color=auto php-fpm
[root@web1 init.d]#
[root@web1 init.d]#
[root@web1 init.d]#
[root@web1 init.d]# /etc/init.d/php-fpm start
Starting php-fpm done
[root@web1 init.d]#
[root@web1 init.d]#
[root@web1 init.d]# ps -ef|grep php-fpm
root 41615 1 0 14:30 ? 00:00:00 php-fpm: master process (/usr/local/php/etc/php-fpm.conf)
php-fpm 41616 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41617 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41618 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41619 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41620 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41621 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41622 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41623 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41624 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41625 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41626 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41627 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41628 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41629 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41630 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41631 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41632 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41633 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41634 41615 0 14:30 ? 00:00:00 php-fpm: pool www
php-fpm 41635 41615 0 14:30 ? 00:00:00 php-fpm: pool www
root 41641 34132 0 14:30 pts/2 00:00:00 grep --color=auto php-fpm
vim /usr/local/nginx/html/a.php
内容如下:
下载zabbix编译包：
cd /opt/
groupadd zabbix
useradd -g zabbix zabbix
tar -zxf zabbix-3.4.10.tar.gz
cd zabbix-3.4.10
./configure --prefix=/usr/local/zabbix --enable-server --enable-agent --with-mysql --enable-ipv6 --with-net-snmp --with-libcurl --with-libxml2
make && make install
mkdir -p /usr/local/nginx/html/zabbix
cp -ra frontends/php/* /usr/local/nginx/html/zabbix
安装数据库
安装文档博客里面有！！！
创建zabbix数据库，用户及授权！
mysql -uroot -p
mysql> create database if not exists zabbix default character set utf8 collate utf8_general_ci;
进入zabbix库里面
mysql> use zabbix;
查看当前库
select database();
find / -name schema.sql（找出要导入数据文件相关路径）
mysql> source /opt/zabbix-3.4.10/database/mysql/schema.sql;
mysql> source /opt/zabbix-3.4.10/database/mysql/images.sql;
mysql> source /opt/zabbix-3.4.10/database/mysql/data.sql;
grant all privileges on zabbix.* to zabbix@'localhost'> #允许账户zabbix能从本机连接到数据库zabbix
///zabbix 是你的zabbix表名。
///zabbix 是你的MySql用户名
///127.0.0.1 是你限制之能这个IP登录这个账号，写成localhost也和127.0.0.1同样，表示只能本机访问，如果写成 % 的意思是任何IP都可以连接。
delete from mysql.user where user="";
flush privileges;
备份配置文件
cd /usr/local/zabbix/etc/
cp zabbix_agentd.conf zabbix_agentd.conf.bak
cp zabbix_server.conf zabbix_server.conf.bak
[root@xuegod64 ~]# vim /usr/local/zabbix/etc/zabbix_server.conf
LogFile=/usr/local/zabbix/logs/zabbix_server.log
PidFile=/tmp/zabbix_server.pid
DBHost=localhost
DBName=zabbix
DBUser=zabbix
DBPassword=zabbix #（zabbix用户的密码）
DBSocket=/tmp/mysql.sock
AlertScriptsPath=/usr/local/zabbix/alertscripts
创建自定义脚本目录，设置权限，目录下的脚步，可以被zabbix调用
mkdir /usr/local/zabbix/alertscripts
chown zabbix.zabbix -R /usr/local/zabbix
监控Zabbix Server本身
监控本身，意思是本身作为服务器之外，自己也做自己的客户端，也要使用agentd这个代理者
配置文件中，有agentd和agent两个配置文件，前者是守护进程，后者依赖xinetd
[root@xuegod64 ~]# vi /usr/local/zabbix/etc/zabbix_agentd.conf
Server=127.0.0.1 #默认监控服务器自己，这三行不用改
ServerActive=127.0.0.1
Hostname=Zabbix server
PidFile=/tmp/zabbix_agentd.pid
LogFile=/usr/local/zabbix/logs/zabbix_agentd.log
UnsafeUserParameters=1 #允许所有的字符是在用户定义的参数，参数传递，也就是支持自定义脚本
其中Server和ServerActive都指定zabbixserver的IP地址，不同的是，前者是被动后者是主动。也就是说前者允许127.0.0.1这个ip来我这取数据。而serverActive的127.0.0.1的意思是，客户端主动提交数据给他。
启动服务
zabbix相关配置
创建日志目录
mkdir /usr/local/zabbix/logs
cd /usr/local/zabbix/etc/
编辑zabbix_server配置文件
LogFile=/usr/local/zabbix/logs/zabbix_agentd.log
编辑zabbix_agentd配置文件
LogFile=/usr/local/zabbix/logs/zabbix_server.log创建自定义脚本目录，设置权限，目录下的脚步，可以被zabbix调用mkdir /usr/local/zabbix/alertscripts
chown zabbix.zabbix -R /usr/local/zabbix
vim /etc/ld.so.conf
在后面加一行：/usr/local/mysql/lib/
重新加载：
ldconfig
添加启动脚本
vi /etc/init.d/zabbix_server
#!/bin/bash
#
# /etc/rc.d/init.d/zabbix_server
#
# Starts the zabbix_server daemon
#
# chkconfig: - 95 5
# description: Zabbix Monitoring Server
# processname: zabbix_server
# pidfile: /tmp/zabbix_server.pid
# Modified for Zabbix 2.0.0
# May 2012, Zabbix SIA
# Source function library.
. /etc/init.d/functions
RETVAL=0
prog="Zabbix Server"
ZABBIX_BIN="/usr/local/zabbix/sbin/zabbix_server"
if [ ! -x ${ZABBIX_BIN} ] ; then
echo -n "${ZABBIX_BIN} not installed! "
# Tell the user this has skipped
exit 5
fi
start() {
echo -n $"Starting $prog: "
daemon $ZABBIX_BIN
RETVAL=$?
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/zabbix_server
echo
}
stop() {
echo -n $"Stopping $prog: "
killproc $ZABBIX_BIN
RETVAL=$?
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/zabbix_server
echo
}
case "$1" in
start)
start
;;
stop)
stop
;;
> stop
sleep 10
start
RETVAL=$?
;;
condrestart)
if [ -f /var/lock/subsys/zabbix_server ]; then
stop
start
fi
;;
status)
status $ZABBIX_BIN
RETVAL=$?
;;
*)
echo $"Usage: $0 {condrestart|start|stop|restart|reload|status}"
exit 1
esac
exit $RETVAL
vi /etc/init.d/zabbix_agentd
#!/bin/bash
#
# /etc/rc.d/init.d/zabbix_agentd
#
# Starts the zabbix_agentd daemon
#
# chkconfig: - 95 5
# description: Zabbix Monitoring Agent
# processname: zabbix_agentd
# pidfile: /tmp/zabbix_agentd.pid
# Modified for Zabbix 2.0.0
# May 2012, Zabbix SIA
# Source function library.
. /etc/init.d/functions
RETVAL=0
prog="Zabbix Agent"
ZABBIX_BIN="/usr/local/zabbix/sbin/zabbix_agentd"
if [ ! -x ${ZABBIX_BIN} ] ; then
echo -n "${ZABBIX_BIN} not installed! "
# Tell the user this has skipped
exit 5
fi
start() {
echo -n $"Starting $prog: "
daemon $ZABBIX_BIN
RETVAL=$?
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/zabbix_agentd
echo
}
stop() {
echo -n $"Stopping $prog: "
killproc $ZABBIX_BIN
RETVAL=$?
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/zabbix_agentd
echo
}
case "$1" in
start)
start
;;
stop)
stop
;;
> stop
sleep 10
start
RETVAL=$?
;;
condrestart)
if [ -f /var/lock/subsys/zabbix_agentd ]; then
stop
start
fi
;;
status)
status $ZABBIX_BIN
RETVAL=$?
;;
*)
echo $"Usage: $0 {condrestart|start|stop|restart|reload|status}"
exit 1
esac
exit $RETVAL
添加执行权限
chmod +x /etc/init.d/zabbix_server
chmod +x /etc/init.d/zabbix_agentd
/etc/init.d/zabbix_server start
/etc/init.d/zabbix_agentd start
netstat -ntpl|grep zabbix
tcp 0 0 0.0.0.0:10050 0.0.0.0:* LISTEN 21188/zabbix_agentd
tcp 0 0 0.0.0.0:10051 0.0.0.0:* LISTEN 21140/zabbix_server
[root@xuegod64 ~]# useradd -u 8005 -M -s /sbin/nologin zabbix
//如果zabbix用户不存在，将以root运行，新建之后，如果zabbix存在，那么久直接可以用zabbix运行
[root@xuegod64 ~]# /usr/local/zabbix/sbin/zabbix_server //直接运行
报错 Starting zabbix_server: /usr/local/zabbix//sbin/zabbix_server: error while loading shared libraries: libmysqlclient.so.20: ca...or directory
解决 ln -s /usr/local/mysql/lib/libmysqlclient.so.20 /usr/lib64/
[root@xuegod64 ~]# echo /usr/local/zabbix/sbin/zabbix_server >> /etc/rc.local //开机启动
启动脚本
cp -a /usr/local/zabbix/sbin/zabbix_agentd /etc/init.d/
cp -a /usr/local/zabbix/sbin/zabbix_server /etc/init.d/
[root@web1 init.d]# /etc/init.d/zabbix_server start
> Starting zabbix_server (via systemctl): [ 确定 ]
[root@web1 init.d]# /etc/init.d/zabbix_agentd start
Starting zabbix_agentd (via systemctl): [ 确定 ]
出现错误的解决
zabbix_server: error while loading shared libraries: libmysqlclient.so.20: cannot open shared object file: No such file or directory
yum install mysql-devel mysql-libs
[root@web1 init.d]# ps -ef|grep zabbix
zabbix 39538 1 0 13:51 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_server
zabbix 39570 1 0 13:51 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd
zabbix 39572 39570 0 13:51 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: collector [idle 1 sec]
zabbix 39573 39570 0 13:51 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: listener #1 [waiting for connection]
zabbix 39574 39570 0 13:51 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: listener #2 [waiting for connection]
zabbix 39575 39570 0 13:51 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: listener #3 [waiting for connection]
zabbix 39576 39570 0 13:51 ? 00:00:00 /usr/local/zabbix/sbin/zabbix_agentd: active checks #1 [idle 1 sec]
root 39587 34132 0 13:51 pts/2 00:00:00 grep --color=auto zabbix
[root@xuegod64 ~]# netstat -antup | grep zabbix
tcp 0 0 0.0.0.0:10051 0.0.0.0:* LISTEN 94837/zabbix_server
bix_server
WEB访问：
http://IP/zabbix
进入初始配置向导：
下一步
设置数据库连接信息，下一步
这里就有问题了，报了一个小错。解决办法：
Database error
Error connecting to database: No such file or directory
2中解决办法：
1、ln -s /var/lib/mysql/mysql.sock /tmp/
2、vim /usr/local/php/etc/php.ini
mysqli.default_socket = /var/lib/mysql/mysql.sock
/etc/init.d/php-fpm restart
/etc/init.d/php-fpm restart
Mysql
Localhost
0是使用默认端口
Zabbix
Zabbix
123456
设置zabbix服务信息，下一步
主机ip：localhost
端口号：可以按照自己的需要设置
服务名称：yunjiankong
有可能会提示Unable to create the configuration file.
Please install it manually, or fix permissions on the conf directory.
Press the "Download configuration file" button, download the configuration file and save it as
"/usr/local/nginx/html/zabbix/conf"(这里提示保存位置)
直接下载zabbix.conf.php放到cd /usr/local/nginx/html/zabbix/conf下就好了，
或者修改cd /usr/local/nginx/html/zabbix/conf的权限
chown -R zabbix:zabbix zabbix.conf.php
chmod 644 zabbix.conf.php
Zabbix前端是准备好了!默认的用户名是Admin,密码zabbix
Ok,到此已安装成功。
解决zabbix页面中文乱码
2.1在windows的C:\Windows\Fonts找到字体文件simkai.ttf
2.2在zabbix服务器上找到zabbix默认字体文件DejaVuSans.ttf的目录，并将simkai.ttf文件上传至该目录
[root@localhost fonts]# find / -name 'DejaVuSans.ttf'
/usr/local/nginx/html/zabbix/fonts/DejaVuSans.ttf
[root@localhost ~]# cd /usr/local/nginx/html/zabbix/fonts
上传到目录里面
[root@localhost fonts]# ll
-rw-r--r-- 1 zabbix zabbix 756072 6月 4 19:40 DejaVuSans.ttf
-rw-r--r-- 1 zabbix zabbix 11787328 12月 4 2017 simkai.ttf
2.3将配置文件vi /usr/local/nginx/html/zabbix/include/defines.inc.php中的以下两行更换为新的字体simkai
define('ZBX_GRAPH_FONT_NAME', 'simkai'); // font file name
define('ZBX_FONT_NAME', 'simkai');
打开页面就可以看到显示正常了
|
|
|
QQ群⑧：
窥视卡
雷达卡
发表于 2018-11-11 10:54:41
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
显身卡