| 
 | 
	
 
 
  apache虚拟主机分为三类:基于IP、基于端口、基于域名。通常虚拟主机和中心主机不能同时使用,开启虚拟主机需注释掉以下一行: 
 
DocumentRoot "/var/www/html"一、基于IP 
   1.  
假设服务器有个IP地址为192.168.1.10,使用ifconfig在同一个网络接口eth0上绑定3个IP: 
[root@localhost root]# ifconfig eth0:1 192.168.1.11 
[root@localhost root]# ifconfig eth0:2 192.168.1.12 
[root@localhost root]# ifconfig eth0:3 192.168.1.13   2. 修改hosts文件,添加三个域名与之一一对应: 
 
  192.168.1.11   www.test1.com 
192.168.1.12   www.test2.com 
192.168.1.13   www.test3.com 
   3.  
建立虚拟主机存放网页的根目录,如在/www目录下建立test1、test2、test3文件夹,其中分别存放1.html、2.html、3.html 
 
  /www/test1/1.html 
/www/test2/2.html 
/www/test3/3.html 
   4.  
在httpd.conf中将附加配置文件httpd-vhosts.conf包含进来,接着在httpd-vhosts.conf中写入如下配置: 
 
  ServerName www.test1.com 
  DocumentRoot /www/test1/ 
   
     Options Indexes FollowSymLinks 
     AllowOverride None 
     Order allow,deny 
     Allow From All 
    
 
 
  ServerName www.test1.com 
  DocumentRoot /www/test2/ 
   
     Options Indexes FollowSymLinks 
     AllowOverride None 
     Order allow,deny 
     Allow From All 
    
 
 
  ServerName www.test1.com 
  DocumentRoot /www/test3/ 
   
     Options Indexes FollowSymLinks 
     AllowOverride None 
     Order allow,deny 
     Allow From All 
    
   5.  
大功告成,测试下每个虚拟主机,分别访问www.test1.com、www.test2.com、www.test3.com 
 
二、基于主机名 
   1. 设置域名映射同一个IP,修改hosts: 
 
  192.168.1.10  www.test1.com 
192.168.1.10  www.test2.com 
192.168.1.10  www.test3.com 
   2. 跟上面一样,建立虚拟主机存放网页的根目录 
 
  /www/test1/1.html 
/www/test2/2.html 
/www/test3/3.html 
   3.  
在httpd.conf中将附加配置文件httpd-vhosts.conf包含进来,接着在httpd-vhosts.conf中写入如下配置: 
      为了使用基于域名的虚拟主机,必须指定服务器IP地址(和可能的端口)来使主机接受请求。可以用NameVirtualHost指令来进行配置。 如果服务器上所有的IP地址都会用到, 你可以用*作为NameVirtualHost的参数。在NameVirtualHost指令中指明IP地址并不会使服务器自动侦听那个IP地址。 这里设定的IP地址必须对应服务器上的一个网络接口。 
      下一步就是为你建立的每个虚拟主机设定配置块,的参数与NameVirtualHost指令的参数是一样的。每个定义块中,至少都会有一个ServerName指令来指定伺服哪个主机和一个DocumentRoot指令来说明这个主机的内容存在于文件系统的什么地方。 
    如果在现有的web服务器上增加虚拟主机,必须也为现存的主机建造一个定义块。其中ServerName和DocumentRoot所包含的内容应该与全局的保持一致,且要放在配置文件的最前面,扮演默认主机的角色。 
NameVirtualHost *:80 
   
  ServerName * 
  DocumentRoot /www/  
 
 
  ServerName www.test1.com 
  DocumentRoot /www/test1/ 
   
    Options Indexes FollowSymLinks 
    AllowOverride None 
    Order allow,deny 
    Allow from all 
   
  
 
  ServerName www.test2.com 
  DocumentRoot /www/test2/ 
   
    Options Indexes FollowSymLinks 
    AllowOverride None 
    Order allow,deny 
    Allow from all 
   
 
 
  ServerName www.test3.com 
  DocumentRoot /www/test3/ 
   
    Options Indexes FollowSymLinks 
    AllowOverride None 
    Order allow,deny 
    Allow from all 
   
   
   4.  
大功告成,测试下每个虚拟主机,分别访问www.test1.com、www.test2.com、www.test3.com 
 
  三、基于端口 
 
  1.   
修改配置文件 
  将原来的 
  Listen  
80 
    改为 
        Listen  
80 
   Listen 8080 
   
2.  
更改虚拟主机设置: 
 
    DocumentRoot /var/www/test1/ 
    ServerName www.test1.com 
 
 
    DocumentRoot /var/www/test2 
    ServerName www.test2.com 
   
 
  http://common.cnblogs.com/images/copycode.gif 
   
 
 
 
 
 |   
 
 
 
 | 
  
 |